Strength of Material
Strength of Material
Item Description
Sci-tech Moment of Inertia Apparatus MT 163 is designed to determine the moment of inertia of many kind of object with oscillation method. Oscillation occurs caused by torque which is applied to the spiral spring which is mounted on the axis [...]
The moment of inertia of a rolling object is the rotary analogy of mass and governs the rotary acceleration. It can be determined in three ways; by rolling, oscillation or direct calculation. All should ideally give the same result but the stu [...]
Conservation of linear momentum is well understood and often demonstrated to students. Equally important is the conservation of angular momentum. It is not easy to do meaningful experiments on this, but a highly visual demonstration of almost [...]
Sci-tech Wall Mounted Screw Jack: Rotational Friction Model MT 160 demonstrates how rotational friction affects the efficiency of popular machine elements, including a screw jack, a wedge and different bearings. Sci-tech Wall Mounted Screw Jac [...]
Sci-tech Toggle With Single And Double Action Model MT 159 Demonstrates the characteristics of a mechanical toggle, crank motion and the most popular shaped cams: pear, heart, round and snail. Sci-tech Toggle With Single And Double Action Mode [...]
Sci-tech Motor Driven Torsion Test Apparatus: 200Nm Model MT 158 is an experimental unit allow torsion tests in which specimens are subjected to load until they fracture. The clean layout and simple operation mean the experimental sequence can [...]
Sci-tech Material Testing Apparatus 50kN Model MT 157, in conjunction with the accessories, offers experiments from destructive materials testing. The clean layout and simple operation mean the experimental sequence can be observed in all deta [...]
The range of experiments with Sci-tech Material Testing: 20KN Model MT156 covers tensile tests, compression tests and Brinell hardness tests in the base unit. Bending, shear and cupping tests can be conducted using the accessories. Disk and co [...]
‘Sci-tech’ Integrated Structural Engineering Studies Apparatus Model MT 152 is designed to understand structural behavior in cantilevers, beams & portal frames studies. On a transparent panel the experiment carried out are directly display [...]
Sci-tech Rectilinear Plant Apparatus Model MT 151 is used to explain and experiment on the behavior of mass-spring-damper systems. The drive motor enables investigation of forced responses, while the three masses, three springs and single dam [...]
Sci-tech Fundamentals of Static Apparatus Model MT 149 demonstrates fundamental principles of statics such as the equilibrium of forces and moments, resolution of forces, the law of levers, and more. The base element is an upright panel. Fee [...]
Sci-tech Strength of Materials Modular Experiments Kit Model MT 146 is a complete package in Engineering Science experiments. The full set includes the mobile trolley, a full set of Strength of Materials kits; work panels and a spares kit. Thi [...]
Sci-tech Photo-elastic Demonstration Apparatus Model MT 145 can be used with overhead projectors. Various transparent plastic models are mounted inside a frame. A load application device is used to apply pressure or tensile loads to the model [...]
Sci-tech Ships Vibrations Apparatus Model MT 144 is designed to enable students to investigate a simple hull model for resonance phenomena. It may be used with the Flotation Tank or the model is simply suspended in air. The unit is used to inv [...]
Sci-tech Belt Drive: Slip & Creep Measurements Model MT 143 is useful for measurement of power transmitted for various input power conditions with varied belt tension. Belt slip or creep also can be measured. The apparatus consists of a va [...]
Sci-tech Photo Elastic Transmission Polariscope Model MT 142 is used to conduct photo-elastic experiments on plane, transparent plastic models. The models are subjected to load by external forces, and they are radiated by circular polarised [...]
Sci-tech Rotational Inertia Model MT 141 can be used to study mass moments of inertia of rotating bodies (hollow cylinder or solid cylinder). The experimental unit is clamped to a table-top plate via two support rods. A support rod supports th [...]
Sci-tech Verification of Stress Hypothesis Model MT 140 is used to verify these comparative stress hypotheses on test specimens made of various metals. For the purpose, a multi-axial stress state is produced at a point on the specimen and the [...]
Sci-tech Hertzian Pressure Model MT 139 is an experimental unit demonstrates the shape of the occurring contact area under Hertzian pressure as an example. A rubber pressure pad is pressed against a transparent plastic plate via a lever. The p [...]
Sci-tech Kinematic model: Ackermann Steering Mechanism Model MT 138 is used to study a steering trapezoid. The experimental unit comprises two track rods with drag link, two track-rod arms and two steering pins, where, in theory, the wheels ar [...]
Sci-tech Slotted Link Mechanism Model MT 137 is an example of a quick-return mechanism, capable of transforming circular motion into reciprocating motion. It is made of aluminum and consists of a rotary element (graduated disk), called crank, [...]
Sci-tech Bifilar / Trifilar Suspension Apparatus Model MT 136 can be used to study pendulum swings with bifilar or trifilar suspension. A beam, a cylinder or a circular ring are used as pendulum bodies. The length of the threads can be adjuste [...]
Sci-tech Torsion Of Circular Sections Apparatus Model MT 135 examines the behavior in the elastic region of solid and tubular-section specimens. Two chucks on a backboard hold a test specimen. A mechanism on one chuck applies torque manually t [...]
Sci-tech Vibrations of a Spiral Spring Apparatus Model MT 134 has been designed to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion. In this sense, the unit c [...]
Sci-tech Forces on A Beam Apparatus Model MT 133 allows an extensive range of experiments to cover virtually all course requirements relating to bending of beams. The basic unit provides facilities for supporting beams on simple, built-in and [...]
Sci-tech Journal Bearing Demonstration Apparatus Model MT 132 allows students to study the performance of a journal bearing during different test conditions. It is a plain steel shaft encased in a clear acrylic shell and directly driven by an [...]
Sci-tech Epicyclic Gear Train Apparatus Model MT 131 consists of two standard epicyclic gear trains. Each gear train consists of a sun gear in the centre, three planet gears, a planet linkage and an internal or ring gear. The sun gear, ring ge [...]
Sci-tech 30Nm Torsion Testing Machine Model MT 130, is a compact machine, ideal for classroom demonstrations and for safe use by small groups of students. Its frame is a rigid, precision engineered alloy box-section, supported at each end by a [...]
Sci-tech Vibrations Fundamentals Training Kit Model MT 128 is an innovative tool you can use for teaching the fundamental principles of mechanical vibration. MT 128 is well researched and designed for immediate implementation for vibration lab [...]
Sci-tech Universal Mechanisms Kit Model MT 126 combines a wide variety of simple mechanism experiments into one single kit. Each experiment can be assembled easily and quickly and are made from high quality, durable materials. The accessories [...]
Sci-tech Universal Vibration Apparatus Model MT 125 consists of various parts & measuring units required to carry out variety of vibration experiments like pendulum, mass spring, free and forced vibrations, lateral vibrations, torsional vi [...]
Sci-tech Friction & Inclined Plane Kit Model MT 124 includes parts for experiments in friction and forces on a flat or inclined plane. The plane has an inclinometer and adjustment to allow the student to set the plane to any angle between [...]
Sci-tech Static & Dynamic Balancing Apparatus Model MT 123 allows students to do experiments in balancing a rotating mass system and check their results against accepted theory. A sturdy base unit holds a test assembly on four flexible mou [...]
Ball mills are a form of mills with grinding bodies. The drums can be opened at the front and loaded with the material to be milled (limestone is recommended) and the milling balls. The drums are mounted on a drive roller and a loose roller wi [...]
Sci-tech Dependent Motion Apparatus Model MT 121 is set up on the lab bench using a stand base. The block and tackle can be expanded to three pairs of pulleys and can support loads of up to 20N. the pulleys are mounted virtually friction-free [...]
Sci-tech Equilibrium in a Single Plane Model MT 120, demonstrates the principle of “freeing”, which refers to establishing static equilibrium. The experiment uses a model of a ladder with a sliding clamp weight. The top support is designed as [...]
Sci-tech Simple & Compound Pendulum Apparatus Model TM 119 explores free vibrations in simple ‘one degree of freedom’ systems. It introduces students to key scientific terms such as: Simple harmonic motion and period of oscillation Mass mo [...]
Sci-tech Moments Experiments Kit Model MT 117 Moments experiment kit enables students to understand the relationship of weights and beam balance. Different configurations are possible to enhance understanding of the principles of moments, leve [...]
Sci-tech Gyroscope Model MT 116 allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally sup [...]
Sci-tech Inverted Pendulum Apparatus Model MT 115’s learning contents of the experimental unit are extended by ‘Controller Unit’ that is more complex because of its two independent drives. Conducting the experiment makes high demands on the sy [...]
The object of Sci-tech Bending & Torsion Apparatus Model MT 114 is to determine what levels of combined bending and torsion cause elastic failure in different materials, and to compare them with various theories of failure. The apparatus u [...]
Sci-tech Geneva Mechanism Model MT 113 has been designed to demonstrate the action of a Geneva drive during the indexing and rest periods. Sci-tech Geneva Drive Mechanism Model MT 113 is a mechanism that transforms continuous circular motion i [...]
Sci-tech Plastic Bending of Beams Apparatus Model MT 112 provides two end supports; one for completely rigid end fixings, whilst the other giving horizontal travel. Both supports create simple supports (knife edges) and have clamp plates which [...]
Sci-tech Whirling Shaft Apparatus Model MT 111 experimental unit teaches knowledge about how to determine the critical speeds. Illustrative experiments are used to explain resonance and supercritical or subcritical states of a vibrating system [...]
As light-weight structures offering a high degree of rigidity, trusses are employed in the construction of halls, bridges, cranes, pylons and masts. Trusses are bar structures in which the bars are subjected to compression or tension loading, [...]
The principle of “freeing” in engineering mechanics allows forces and moments acting on a body to be made visible. In this process, a body or a system such as a bar are virtually removed from the environment. All forces acting on the body or o [...]
Sci-tech Fundamentals of Static Apparatus Model MT 108 demonstrates fundamental principles of statics such as the equilibrium of forces and moments, resolution of forces, the laws of rigid body, the law of levers and beam and suspension of of [...]
Sci-tech Virtual Work Principles Apparatus Model MT 103 is used for applying the principle of virtual work to the derivation of redundant reactions. It is to be used with Universal Structural Frame. An elastic beam is supported at both ends by [...]
Sturdy, compact, self-contained bench top unit for determining the surface strains and deflections of a flexible diaphragm under varying pressures. An aluminum diaphragm is clamped rigidly around its outer edge, creating a volume underneath it [...]
Sci-tech Elastic Line of Beam Model MT 101 is used to determine the deformation of a bending beam. To do this, a beam is studied under varying loads, different support conditions and static indeterminacy. The elastic line is determined by calc [...]
Sci-tech Tensile Test Machine Model MT 100 has been designed to study the tensile tests on specimens made of different material. With Sci-tech Tensile Test Machine Model MT 100, tensile test can be performed. A specimen made of different mater [...]
Sci-tech Pin Jointed Frameworks Model MT 099 includes two framework supports: a pivoting support, and a pivoting and rolling support. Each member has a strain gauge attached that connects to a digital strain bridge. A load cell applies loads t [...]
Sci-tech Belt Drive Study Apparatus Model MT 098 can be used to investigate conditions that cause vibration or slip. The effect of disparate elongation on multiple belt drives can be demonstrated by means of individually-adjustable tensioning [...]
Sci-tech Torsion Test Apparatus Model MT 097 allows to verify the basis of torsion and to perform practical exercises to demonstrate: - Circular rods elastic torsion equation. - The rigidity modulus of different materials. To perform the tests [...]
Sci-tech Bending Stress in a Beam Apparatus Model MT 096 allows adjustment of a load cell that bends the beam and, when connected to the optional Digital Force Display, it measures the bending force (load). Strain gauges and a digital strain b [...]
Sci-tech Spring Test Apparatus Model MT 095 uses a fundamental variable mass and scale measurement to test springs. It shows students how to find the properties of a spring and proves some basic laws of physics (Hooke’s law, Newton’s law and s [...]
Sci-tech Impact Test Apparatus Model MT 094 experimental unit is a solid-pendulum impact tester, designed for the Charpy notched-bar impact test. The clean layout and simple operation mean the experimental sequence can be observed in all detai [...]
Sci-tech Linear & Angular Speed Apparatus Model MT 093 stepped shaft is secured to a main shaft, which itself is secured within a bracket. The bracket can be bench or wall mounted. Wrapped around the circumference of each step of the shaft [...]
Sci-tech Variable Forces Apparatus Model MT 092 is a simple lifting mechanism with obvious nonlinear characteristics. A suspension cord carrying a loaded trolley at mid span is tensioned by passing the cord over a pulley at one end and down to [...]
Sci-tech Roof Truss Apparatus Model MT 091 is used to measure the deformation in elements of roof truss. Whenever a load is applied to a roof truss, its members undergo a strain. This unit consists of a base structure which provides the suppor [...]
Sci-tech Twist & Bending Machine Model MT 090 is a combined apparatus for the demonstration of both twist and bend to be used in the laboratory or as a complement of the theoretical study about twist and bend. Its size and weight facilitat [...]
The Sci-tech Universal Buckling Unit Model MT 089 is a unit designed to demonstrate the concept of buckling for struts, that allow to determine experimentally the relation between the buckling load and the methods of support of the test bars, [...]
Sci-tech 20kN Tensile, Compression & Brinell Mechanical Tests Set up Model MT 088 covers tensile tests, compression tests and Brinell hardness tests in the base unit. Bending, shear and cupping tests can be conducted using the accessories. [...]
Sci-tech Polygon and Forces Apparatus Model MT 087 consists of a circular table above the bench top. The table supports a large protractor and central pin. Around the edge of the table can be secured movable pulleys. These pulleys can be secur [...]
Sci-tech Three-Dimensional Equilibrium Apparatus Model MT 084 is used for studying the equilibrium of five concurrent and non-concurrent forces in a three-dimensional system. A rigid box frame has four swiveling pulleys at the top corners and [...]
Sci-tech Beam Apparatus Model MT 083 allows an extensive range of experiments to cover virtually all course requirements relating to bending of beams. The basic unit provides facilities for supporting beams on simple, built-in and sinking supp [...]
Sci-tech Wheel and Axle Apparatus Model MT 082 has dual diameter wheel has an axle supported on simple pivots in a sturdy wall mounting bracket. Each wheel has a cord wrapped around its periphery. The cords can be wrapped in either direction a [...]
Sci-tech Slider Crank Mechanism Model MT 081 is a quick-return mechanism. This mechanism is a combination of an inversion of the slider-crank chain and slider block. The unit is assembled in an anodized aluminum profile structure, with steel p [...]
Sci-tech Clutch Plate Friction Apparatus Model MT 080, a wall mounted apparatus comprises a lower stationary plate attached to a sturdy wall mounting bracket. On top of this stationary disc sits an upper aluminum alloy plate whose shaft rotate [...]
Sci-tech Redundant Truss Apparatus Model MT 078 fits onto a Structures Test Frame. Two supports hold the top and base of one side of a structure. The top support allows pivoting, the base support allows pivoting and rolling. Initially, one of [...]
Sci-tech Tension Coefficient Apparatus Model MT 077 consists of a jib restrained by two chain ties making a triangulated three-dimensional structure. The jib and both ties are fitted with spring balances so that the internal forces can be meas [...]
Sci-tech Rotating Fatigue Testing Apparatus Model MT 076 has been designed to introduce students to the effects of material fatigue using a sinusoidal variation of bending stress. A 2800rpm motor rotates a specimen through a gear and pulley ar [...]
Sci-tech Deflection of Beams & Cantilevers Apparatus Model MT 074 consists of a backboard that fixes to the Structures Test Frame. Test beams fit onto the backboard using a rigid clamp and knife-edge supports. Students apply loads at any p [...]
Sci-tech Reaction of Beam Apparatus Model MT 073 is designed for simple experiments and demonstrations on simply supported beams. Two spring balances act as supports and enable reactions to be read directly. Three movable load hangers allow lo [...]
In the Sci-tech Shear Force Apparatus Model MT 072, the experimental beam is in two parts, joined by a pair of ball bearing rollers running in flat vertical tracks. To develop the internal beam forces at the section an under slung tension spri [...]
Sci-tech Gears Maintenance Trainer Model MT 071 is a versatile assembly allows for convenient hands-on training in gear identification, installation, alignment, and troubleshooting. The device includes a diverse selection of industrial quality [...]
Sci-tech Bending Moment Apparatus Model MT 069, experimental beam is in two parts, joined together by a pair of low friction ball bearings. An under slung spring balance provides a resisting moment, and also allows the section bending moment t [...]
An unlimited range of beam experiments can be performed on Sci-tech Advanced Beam Testing Apparatus Model MT 068, to measure support reactions, deflections and rotations of simply supported, fixed and two span continuous beams, simple and prop [...]
Sci-tech Thick Cylinder Apparatus Model MT 055H been developed to enable the student to verify the various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an [...]
Experiment investigating with the Sci-tech Unsymmetrical Bending and Shear Centre Apparatus Model MT 067, of different sectioned beams when the loading is not in the plane of a principal axis. A ‘U’ section, ‘L’ section and rectangular beam ca [...]
Sci-tech Continuous Beam Apparatus Model MT 066 teaching apparatus enables a range of laboratory, classroom and computer-based experiments for civil, mechanical and structural engineering students investigating beams and beam behavior, from si [...]
Sci-tech Buckling of Bars Apparatus Model MT 065 is used to clearly demonstrate the elastic buckling of bars under various influences. In this experiment, a bar is clamped or supported at both ends, depending on the buckling case. A load mecha [...]
Sci-tech Unsymmetrical Cantilever Apparatus MT 064 allows students to load a cantilever and accurately measure its deflection in any coplanar direction. Students mount a test beam vertically in a frame. The top of the test beam fixes to a hold [...]
Sci-tech Digital Fatigue Testing Machine Model MT 063 is used to test the fatigue strength of materials and to draw S-N diagram by research institutes, laboratories, material manufactures and various industries. This is a rotating beam type ma [...]
In the Sci-tech Hooke’s Law Apparatus Model MT 062 the weights are loaded one by one and unloaded one by one to bring the spring to its elastic mode. Weights are then added in the pan and reading of pointer on the scale is noted. Some more wei [...]
Sci-tech Hook’s Coupling Apparatus Model MT 061 is a table model that demonstrates the transmission of angular motion to joint shafts, the related gimbal error and how this error can be rectied using Hooke’s couplings. The model consists of t [...]
Sci-tech Strut Buckling Apparatus Model MT 060 is an apparatus, to demonstrate the buckling of structures under compression. Sci-tech Strut Buckling Apparatus Model MT 060 allows the student to obtain experimentally the buckling critical load [...]
Sci-tech Acceleration of Geared Systems Apparatus Model MT 059 basically consists of three shafts, each mounted on ball races and connected by gearing. A flywheel is attached to one of the shafts. The discs having varying mass moments of inert [...]
Sci-tech Apparatus for determining the Gauge Factor of Strain Gauges Model MT 058 allows the measurement of deflection and strain in a bar and the determination of the gauge factor of strain gauges Sci-tech Apparatus for determining the Gauge [...]
Sci-tech Simple Balancing Apparatus Model MT 057 is basically formed by a shaft mounted on bearings. This shaft is coupled by pulley to an electrical motor with variable speed that will make it turn. The whole is fixed to the support structure [...]
Sci-tech Torsional Oscillations Apparatus Model MT 056 enables to illustrate and investigate the torsional oscillations of single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have some fasteners whic [...]
Sci-tech Thick Cylinder Apparatus Model MT 055H been developed to enable the student to verify the various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an [...]
Sci-tech Thin Cylinder Apparatus Model MT 055 been developed to enable the student to verify the various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an o [...]
Sci-tech Free Vibration Apparatus Model MT 054 has been designed to perform demonstrations and experiments which provide an understanding of the free vvibrations of a simple spring-mass-damper system. Demonstrations may be carried out to illus [...]
Sci-tech Deflection of Curved Bar Apparatus Model MT 053 is designed to enable the student to determine experimentally the horizontal and vertical displacements at the free end of various curved bars when subject to single concentrated load. S [...]
Sci-tech Portal Frame Unit Model MT 052 has been designed to determine the deflection at the load point for a rectangular portal frame subjected to horizontal and vertical loads. The system is formed by a frame attached to a rigid base and loa [...]
Sci-tech Two Pinned Arch Unit Model MT 051 enables to determine experimentally the horizontal component of the abutment thrust of a two hinged arch beam. The beam is supported on ball bearing rollers attached to each end of the beam and the ho [...]
Sci-tech Torsional Vibration Apparatus Model MT 050 is experimental unit used to explain torsion and torsional vibration in experiments. Demonstrations and student experiments are both foreseen in equal measures. The core of the experiment is [...]
