Belt Drive Study Apparatus Model MT 098
Home » Products » Belt Drive Study Apparatus Model MT 098
Belt Drive Study Apparatus Model MT 098
Sci-tech Belt Drive Study Apparatus Model MT 098 can be used to investigate conditions that cause vibration or slip. The effect of disparate elongation on multiple belt drives can be demonstrated by means of individually-adjustable tensioning rollers. The belt drive is a dual belt drive with a belt tensioner. It can, however, also be operated with only one belt. An eccentrically-bored small belt pulley and a damaged V-belt enhance the range of possible experiments.
The brake and optional load unit is required to conduct the experiment.
The accessory set is mounted on the base plate of the machinery diagnostic base system.
To measure and evaluate the experiment, optional computerized vibration analyzer is required. It includes all the necessary sensors, a measuring amplifier and analysis software to record the vibration phenomena.
Size: | 60cm x 45cm x 20cm (LxWxH) |
Weight: | 15 kg |
Item Description
Features
- Vibrations in belt drives
- Resonance and critical speed
Belt drives are low-maintenance, low-noise, long-life drive units. It is important that the belt should not vibrate and/or slip.
Sci-tech Belt Drive Study Apparatus Model MT 098 can be used to investigate conditions that cause vibration or slip. The effect of disparate elongation on multiple belt drives can be demonstrated by means of individually-adjustable tensioning rollers. The belt drive is a dual belt drive with a belt tensioner. It can, however, also be operated with only one belt. An eccentrically-bored small belt pulley and a damaged V-belt enhance the range of possible experiments.
The brake and optional load unit is required to conduct the experiment.
The accessory set is mounted on the base plate of the machinery diagnostic base system.
To measure and evaluate the experiment, optional computerized vibration analyzer is required. It includes all the necessary sensors, a measuring amplifier and analysis software to record the vibration phenomena.
Technical Specifications
Specifications
- Investigation of the vibrations of belt drives
- Dual belt drive with V-belt
- Belt drive can be operated with one belt
- Individually-adjustable tensioning rollers
- Belt drive with radial run-out
- Damaged V-belt
- Belt pre-tension measuring unit 0…150N
- Optional brake and load unit is required for experiments on the belt drive
- Stackable storage system to house the components
Technical Specifications
V-belt pulleys
- large: Ø=125mm
- small: Ø=63mm
- small, eccentric: Ø=63mm
Axle centers: 300mm
V-belt
- SPZ, approx. 10mm wide
- belt length: 912mm
Experiments
- Influence of belt tension on vibration behavior
- Influence of speed on vibration behavior
- Influence of pulleys running untrue, and off-track running
- Power split across multiple belt drive
- Influence of slip-on vibration running spectrum
- Comparison between fault-free and damaged belts
- Understanding and interpreting frequency spectra
- Use of a computerized vibration analyzer (optional)
Model Number
MT 098
See also different:
Sci-tech Digital Fatigue Testing Machine Model MT 063 is used to test the fatigue strength of materials and to draw S-N diagram by research institutes, laboratories, material manufactures and various industries. This is a rotating beam type ma [...]
Sci-tech Air Flow Bench – Modular Design Model FM92 is designed to demonstrate behavior of bodies during flow around or through bodies with a compressible fluid. The purpose of experiments is familiarization with and optimization of drag and t [...]
A micro-processor incorporates the functions of a central processing unit (CPU) on a single integrated circuit. The first microprocessors used a word size of only 4 bits, so that the transistors of its logic circuits would fit onto a single pa [...]