Belt Drive: Slip & Creep Measurements Model MT 143
Belt Drive: Slip & Creep Measurements Model MT 143
Sci-tech Belt Drive: Slip & Creep Measurements Model MT 143 is useful for measurement of power transmitted for various input power conditions with varied belt tension. Belt slip or creep also can be measured. The apparatus consists of a variable speed motor, driving pulley and driven pulley of equal diameters. The pulleys are mounted on input shaft (motor shaft) and output shaft. The driven pulley can slide on the base only with bearing block to change the initial tension in belt. Brake drum is mounted on the output shaft, which helps to measure power output. The motor speed is varied by variable speed drive. A double channel digital speed indicator indicates driving and driven pulley speeds. With the help of Stroboscope (optional) it is possible to demonstrate the slip of belt on driving and driven pulley.
| Size: | 130cm x 70cm x 145cm (LxWxH) |
| Weight: | 65 kg |
Item Description
Sci-tech Belt Drive: Slip & Creep Measurements Model MT 143 is useful for measurement of power transmitted for various input power conditions with varied belt tension. Belt slip or creep also can be measured. The apparatus consists of a variable speed motor, driving pulley and driven pulley of equal diameters. The pulleys are mounted on input shaft (motor shaft) and output shaft. The driven pulley can slide on the base only with bearing block to change the initial tension in belt. Brake drum is mounted on the output shaft, which helps to measure power output. The motor speed is varied by variable speed drive. A double channel digital speed indicator indicates driving and driven pulley speeds. With the help of Stroboscope (optional) it is possible to demonstrate the slip of belt on driving and driven pulley.
Technical Specifications
Specifications
- Motor: 1HP@1500 RPM, with Variable Speed Drive
- Pulleys: Driving & Driven pulley of equal diameters (Flat pulleys)
- Loading Arrangement: Brake drum along with spring balance and rope arrangement
- Belts: Flat belts of fixed length of two different belt materials
- Belt tightening arrangement: Bearing block is sliding and dead weight can be applied to set the initial tension in the belts
- Speed indicator: Two channel digital speed indicator with switch to change channels
Experiment Possibilities
- To measure co-efficient of friction between pulley material and different belt materials.
- To measure power transmitted with varied belt tension.
- To measure percentage slip at fixed belt tension by varying load on the brake drum and plot the graph of (T1-T2) v/s percentage slip i.e. “Slip Characteristics”.
- To measure belt slip speed and observe the limiting value of load at constant speed when the slip just starts.
- To study creep of belt.
Model Number
MT 143
See also different:
Features ■ Real operation of the electric vehicle drive system, fully demonstrated it composition and work process. ■ The training table is equipped with electric vehicle instrumentation, real-time display power transmission process, sp [...]
Sci-tech Automotive Ignition Demonstration Trainer Model AM 175 is designed to demonstrate to students the working principles behind the automotive vehicle ignition system. Through the distributor, the alternator supplies power at regular inte [...]
