Fluid Mechanics Trainers Lab Equipments

The large scale of the experimental plant and the utilization of industrial components convey results near the real world. The elements of the experimental plant-like fluid mechanics trainers permit adequate channel and outlet segments for the stream arrangement. FM 97 comprises a few congregations: a siphon station with two distinctively estimated centrifugal pumps, an admission tank, two estimating areas – every one of five-meter length – one with an ostensible length of 50mm (DN50), the other one with 25mm ostensible width (DN25), and a control room comprising of a control center and information obtaining.

Alternatively, the experimental plant fluid mechanics trainers might be worked with an extra tank on a lower level for higher attraction heads. The perplexing framework might be changed in an adaptable manner to the nearby offices. Numerous tradable funneling components permit a broad experimental reach. Utilizing the estimating segmentDN50, the Kv upsides of various control valves are not really settled adjusting to norms, for example, an electro-pneumatic control valve. A straightforward line area with ink infusion permits to notice the stream following a fitting or a valve. To gauge pipe protections, pipe areas with various surface harshness are embedded in the estimating segment DN25. 

A tension-controlled framework controls the framework pressure, the stream rate is constrained by a stream controller and the speed of the pumps. The pumps are worked by the control console. Subsequently the planning of siphon qualities is easily finished. The experimental plant-like fluid mechanics trainers is outfitted with various sensors for pressure, stream rate, temperature, speed, and force. The deliberate qualities can be perused on computerized shows. Simultaneously, the deliberate qualities can likewise be communicated straightforwardly to a PC through USB. The information procurement programming is incorporated. The very much organized educational material sets out the essentials and gives a bit-by-bit guide through the investigations.

Features

* Large scale to guarantee practical measurement results

* Working conduct of centrifugal pumps

* Pressure misfortunes in funneling components

* Kv-esteem assurance of control valves

* Stream rate and strain control

Scitech Didactic is one of the best Fluid mechanics trainers manufacturers, and exporters in India for engineering students.


SUSPENSION PRODUCTION UNIT Model FM 119
SUSPENSION PRODUCTION UNIT Model FM 119

Sci-tech Suspension Production Unit Model FM 119 provides the experimental filtration units with a suspension of diatomite and water (recommended). It is prepared in the stirred tank. The stirrer ensures that the solid remains suspended and do [...]

DRUM CELL FILTER APPARATUS Model FM 118
DRUM CELL FILTER APPARATUS Model FM 118

Sci-tech Drum Cell Filters Model FM 118 can be used to separate solids continuously from suspensions. The suspension unit produces a suspension of diatomite and water. A pump conveys the suspension into the suspension tank of the drum cell fil [...]

AERATION APPARATUS Model FM 106
AERATION APPARATUS Model FM 106

Sci-tech Aeration Apparatus Model FM 106 comprises an open tank equipped with a propeller stirrer. Air is supplied via a compressed air line through a pressure regulator valve, and through a flow meter to a diffuser positioned within the tank. [...]

FLUIDS SPECIFIC GRAVITY & DENSITY TEST APPARATUS Model FM 105
FLUIDS SPECIFIC GRAVITY & DENSITY TEST APPARATUS Model FM 105

Sci-tech Specific Test Apparatus consists of: Pycnometer bottle Volume : 10ml Material : Glass Precision Electronic Scales Capacity : 500 g Resolution ; 0.1 g Accuracy : 0.01 g Display : LCD Power : 2 x AAA battery Medium: Water, Oil with diff [...]

MULTI-STAGE CENTRIFUGAL COMPRESSOR DEMONSTRATION APPARATUS Model FM 99
MULTI-STAGE CENTRIFUGAL COMPRESSOR DEMONSTRATION APPARATUS Model FM 99

Sci-tech Multi-stage Centrifugal Compressor Demonstration Apparatus Model FM 099 allows the students to measure the operation characteristics of a multistage centrifugal compressor. For that purpose, the unit carries out the actual measurement [...]

PUMPS COMPARISON APPARATUS Model FM 95
PUMPS COMPARISON APPARATUS Model FM 95

The experiments familiarize students with various pump types, such as centrifugal and positive-displacement pumps. Sci-tech Pumps Comparison Apparatus Model FM 95 includes two centrifugal pumps, one piston pump as a positive-displacement pump [...]

AIR FLOW BENCH – MODULAR DESIGN Model FM 92
AIR FLOW BENCH – MODULAR DESIGN Model FM 92

ci-tech Air Flow Bench – Modular Design Model FM92 is designed to demonstrate behavior of bodies during flow around or through bodies with a compressible fluid. The purpose of experiments is familiarization with and optimization of drag and th [...]

VISUALISATION OF STREAMLINES Model FM 89
VISUALISATION OF STREAMLINES Model FM 89

The laminar, two-dimensional flow in Sci-tech Visualisation of Streamlines Model FM 89 is a good approximation of the flow of ideal fluids: the potential flow. FM 89 can be used to visualise streamline fields for flows around drag bodies and f [...]

AXIAL FLOW TURBO-MACHINES Model FM 87
AXIAL FLOW TURBO-MACHINES Model FM 87

The core piece of the experimental plant is the Sci-tech Axial Turbo-machines Model FM 87 with attached motor/generator. It can be operated either as a pump or turbine. To this end, different sets of paddles are used. The transparent housing a [...]

AXIAL & CENTRIFUGAL FLOW FAN DEMONSTRATION UNIT Model FM 86
AXIAL & CENTRIFUGAL FLOW FAN DEMONSTRATION UNIT Model FM 86

Sci-tech Axial & Centrifugal Flow Fan Demonstration Model FM 86 is a self-contained bench top unit designed to demonstrate the working of axial & Centrifugal flow fan and to conduct experiments to study the performance of a typical axi [...]

COMPRESSIBLE FLOW STUDY BENCH Model FM 76
COMPRESSIBLE FLOW STUDY BENCH Model FM 76

Sci-tech Compressible Flow Study Bench Model FM 76 experimental unit is used to investigate air flow in various ranges of velocity. A radial fan with infinitely variable speed control draws in air from the environment. At the intake the air fl [...]

SEDIMENTATION TRANSPORT DEMONSTRATION CHANNEL Model FM 75
SEDIMENTATION TRANSPORT DEMONSTRATION CHANNEL Model FM 75

Sci-tech Sedimentation Transport Demonstration Channel Model FM 75 allows demonstration of the full range of bedforms that arise in a mobile bed as the flow and/or slope are increased. The channel can be used to perform most of the experiments [...]

MICRO-RIVER SIMULATOR TRAINER Model FM 73
MICRO-RIVER SIMULATOR TRAINER Model FM 73

Sci-tech Rainfall Run off Simulator Model FM 73 demonstrates some of the major physical processes found in hydrology and fluvial geomorphology, including: rainfall hydrographs for catchment areas of varying permeability; the abstraction of gro [...]

GROUND WATER FLOW UNIT Model FM 70
GROUND WATER FLOW UNIT Model FM 70

Sci-tech Ground Water Flow Unit Model 70 consists of Sand Tank manufactured from Fibre Reinforced Plastic for durable life & corrosion free operation. The tank is mounted on a free-standing steel frame. The tank is to be filled with layer [...]

RAINFALL HYDROGRAPHS DEMONSTRATOR Model FM 69
RAINFALL HYDROGRAPHS DEMONSTRATOR Model FM 69

Sci-tech Rainfall Hydrographs Demonstrator Model FM 69 is designed to study rainfalls in laboratory. The unit consists of a tank filled with gravel. Water is supplied by overhead nozzles & water flow is controlled by a flow control valve. [...]

DRAINAGE AND SEEPAGE TANK DEMONSTRATOR Model FM 67
DRAINAGE AND SEEPAGE TANK DEMONSTRATOR Model FM 67

Sci-tech Drainage and Seepage Tank Demonstrator Model FM 67 has been designed for experimental study & visualization of flow through permeable media. The trainer consists of a Tank with Toughened Glass at front & Aluminum panel at the [...]

SEDIMENTATION TANK MODEL DEMONSTRATOR Model FM 66
SEDIMENTATION TANK MODEL DEMONSTRATOR Model FM 66

Sci-tech Sedimentation Tank Model Demonstrator Model FM 66 is designed to investigate the factors influencing the separation process in sedimentation tanks. In sedimentation tanks, solids are separated out of suspensions under the influence of [...]

SEDIMENTATION STUDIES APPARATUS Model FM 62
SEDIMENTATION STUDIES APPARATUS Model FM 62

Sci-tech Sedimentation Studies Apparatus Model FM 62 is useful in investigation & comparison of sedimentation processes in different suspensions. The trainer is provided with five transparent cylindrical tanks for the purpose. The suspensi [...]

FLUID STATISTIC & MANOMETRY Model FM 56
FLUID STATISTIC & MANOMETRY Model FM 56

Sci-tech Fluid Statistics & Manometry Apparatus Model FM 56 provides an introduction to the behavior of liquids under hydrostatic conditions (fluid at rest) and the application of these principles to pressure measurement using manometers. [...]

PITOT STATIC TUBE APPARATUS Model FM 52
PITOT STATIC TUBE APPARATUS Model FM 52

Sci-tech Pitot Static Tube Apparatus Model FM 52 is used to measure the local velocity at a given point in the flow stress. A pitot tube of standard design made of copper/SS is supplied and is fixed below Vernier scale. The Vernier scale is ca [...]

FLOW METERS MEASUREMENT & CALIBRATION TRAINER Model FM 50
FLOW METERS MEASUREMENT & CALIBRATION TRAINER Model FM 50

Sci-tech Flow Meter Measurements & Calibration Trainer Model FM 50 consists of a Venturi meter, variable area meter and an orifice flow meter and pitot tube, installed in series configuration to permit direct comparison. A flow control val [...]

BASIC PIPES NETWORKS TUTOR Model FM 49
BASIC PIPES NETWORKS TUTOR Model FM 49

A common problem in the installation of pipe-work is the determination of pressure and flow rate in complex pipe systems. Sci-tech Basic Pipes Network Tutor Model FM 49 facilitates the setting up and investigation of different types of pipe sy [...]

ORIFICEMETER, VENTURIMETER & ROTAMETER Model FM 46
ORIFICEMETER, VENTURIMETER & ROTAMETER Model FM 46

Sci-tech Orifice-meter, Venturi-meter & Rota-meter set up Model FM 46 is self-sufficient unit to study the characteristics of Orifice meter, Venturi-meter & Rota-meter. The calibration of these meters can be study by comparing with act [...]

EXPERIMENTAL COOLING TOWER Model FM 45
EXPERIMENTAL COOLING TOWER Model FM 45

Study of different parameter of Cooling Tower system & its calculation is focus of this trainer. System is having unique feature of demonstrating heat transfer by cooling tower process including water to air heat transfer.  Sci-tech has de [...]

PERMEABILITY TANK APPARATUS Model FM 44
PERMEABILITY TANK APPARATUS Model FM 44

Sci-tech Permeability Tank Apparatus Model FM 44 is mounted on a fabricated steel frame fitted with castors and leveling feet. The front, back and ends of the tank are of clear toughened glass giving scratch free visibility without the risk of [...]

Turbine Pump Test Apparatus Model FM 41
Turbine Pump Test Apparatus Model FM 41

Sci-tech Turbine Pump Test Trainer Model FM 41 is designed for students to make comprehensive study of Turbine Pump Characteristics & performance along with power, discharge pressure head parameters. In this system a turbine pump is driven [...]

VENTURI METER Model FM 40
VENTURI METER Model FM 40

Sci-tech Venturi-meter Model FM40 is self-sufficient unit to study the characteristics of Venturi-meter. The calibration of the meter can be study by comparing with actual flow measured in measuring tank. The Venturi is made of clear acrylic m [...]

Pumps Maintenance Trainer Model FM 38
Pumps Maintenance Trainer Model FM 38

Sci-tech Pumps Maintenance Trainer Model FM 38 is designed a bench-top device for training in the disassembly, packing, and reassembly of common centrifugal pumps. The trainer uses an ANSI pump and including many actual pump components, the tr [...]

DEPRESSION MEASUREMENT USING VACUUM PRESSURE GAUGE Model FM 37
DEPRESSION MEASUREMENT USING VACUUM PRESSURE GAUGE Model FM 37

Sci-tech Depression Measurement Vacuum Pressure Gauge FM 37 is an anodized aluminum structure that supports a vacuum gauge whose reading gives us the measurement. Two quick connections at both sides of the vacuum gauge allow connecting reinfor [...]

VORTEX FLOW METER Model FM 36
VORTEX FLOW METER Model FM 36

Sci-tech Vortex Flow Meter Model FM 36 makes it possible to study different methods of volumetric and mass flow measurement, as well as to compare continuous and intermittent methods. This module includes two continuous and two intermittent me [...]

AXIAL FLOW IMPULSE TURBINE APPARATUS Model FM 35
AXIAL FLOW IMPULSE TURBINE APPARATUS Model FM 35

Sci-tech Axial Flow Impulse Turbine Test Apparatus Model FM 35 consists of an inlet manifold which supplies water to four jets which are equally spaced around the turbine runner. Each of the jets can be individually controlled using ball valve [...]

AIR FLOW STUDIES APPARATUS Model FM 34
AIR FLOW STUDIES APPARATUS Model FM 34

Sci-tech Air Flow Studies Apparatus Model FM 034 is a self-contained and compact unit designed to demonstrate the basic fluid mechanics principles by conducting measurements of important characteristics associated with a typical industrial air [...]

MOBILE BED AND FLOW VISUALISATION UNIT Model FM 33
MOBILE BED AND FLOW VISUALISATION UNIT Model FM 33

Sci-tech Mobile Bed and Flow Visualization Unit FM33 is a particularly useful unit to demonstrate the fluidization phenomenon in engineering. It makes it possible to study different situations of flow and mobile bed visualization related to ci [...]

FIXED BED FLOW CHANNEL UNIT Model 32F
FIXED BED FLOW CHANNEL UNIT Model 32F

Sci-tech Fixed Mobile Bed Unit FM32F is a particularly useful unit to demonstrate the fluidization phenomenon in engineering. It makes it possible to study different situations of flow and mobile bed visualization related to civil engineering [...]

ADJUSTABLE BED FLOW CHANNEL UNIT Model FM 32
ADJUSTABLE BED FLOW CHANNEL UNIT Model FM 32

Sci-tech Adjustable Bed Flow Channel Unit Model FM 32 is suitable for demonstrations and teaching of open channel flows. By closing the top of the channel, the unit can also be used to demonstrate duct flows. The complete unit is mounted on a [...]

20M ADJUSTABLE BED FLOW CHANNEL UNIT Model FM 3210~20M
20M ADJUSTABLE BED FLOW CHANNEL UNIT Model FM 3210~20M

The Sci-tech 20M Adjustable Bed Flow Channel Unit Model FM 32 10M~20M is suitable for demonstrations and teaching of open channel flows. By closing the top of the channel, the unit can also be used to demonstrate duct flows. The complete unit [...]

10M LONG ADJUSTABLE BED FLOW CHANNEL UNIT Model FM 32/10M
10M LONG ADJUSTABLE BED FLOW CHANNEL UNIT Model FM 32/10M

The Sci-tech 10M LONG Adjustable Bed Flow Channel Unit Model FM 32/10M is suitable for demonstrations and teaching of open channel flows. By closing the top of the channel, the unit can also be used to demonstrate duct flows. The complete unit [...]

INFILTRATION APPARATUS Model FM 28
INFILTRATION APPARATUS Model FM 28

Sci-tech Infiltration Apparatus Model FM-28 provides a simple but effective laboratory demonstration of the infiltration processes which are fundamental to any form of irrigation. The unit comprises three transparent cylinders in which soil sa [...]

PRESSURE DISTRIBUTION IN VENTURI NOZZLE Model FM 26
PRESSURE DISTRIBUTION IN VENTURI NOZZLE Model FM 26

Sci-tech Pressure Distribution in Venturi Nozzle Model FM 26 Apparatus is a bench top unit and has been designed to measure the variation of static pressure and flow velocity in pipe flow having venturi and nozzle. The apparatus consists of tr [...]

DRAIN PERMEAMETER Model FM 25
DRAIN PERMEAMETER Model FM 25

Sci-tech Drain Permeameter Model FM-36 is suited for use both as a teaching and demonstration tool and for laboratory testing and research. The equipment consists of a 100mm diameter transparent column which may be filled with any soil type. A [...]

RADIAL FLOW TURBINE Model FM 24
RADIAL FLOW TURBINE Model FM 24

Sci-tech Radial Flow Turbine Model FM 24 includes a turbine rotor fitted with four nozzle-shaped exits. The rotor is mounted in a transparent housing. The air flows through the exit nozzles of the turbine rotor, expands and accelerates. The ex [...]

CENTRIFUGAL BLOWER TEST APPARATUS Model FM 22
CENTRIFUGAL BLOWER TEST APPARATUS Model FM 22

Sci-tech Centrifugal Blower Test Apparatus Model FM 22 enables to study of performance of centrifugal blower (Compressor) & its calculation is main focus in designing this trainer. System is having Driving motor, Centrifugal Blower (Compre [...]

FLOW VISUALISATION CHANNEL Model FM 20
FLOW VISUALISATION CHANNEL Model FM 20

 Sci-tech Flow Visualization Channel Model FM 20 is a bench top open channel unit and has been designed to conduct experiments related to open channel flows and to visualize stream line patterns over or around various objects. The apparatus co [...]

FLOW METER DEMONSTRATION APPARATUS Model FM 18
FLOW METER DEMONSTRATION APPARATUS Model FM 18

Sci-tech Flow Meter Demonstration Apparatus Model FM 18 is a mobile bench top unit and has been designed to demonstrate the working of the venture meter, orifice plate and the turbine flow meter. The apparatus consists of a piping network with [...]

FREE & FORCED VORTICES APPARATUS Modelk FM 14
FREE & FORCED VORTICES APPARATUS Modelk FM 14

The Sci-tech Free and Forced Vortices Apparatus Model FM 14 has been designed to generate free and forced vortices. It is possible to measure surface profiles and total head distributions in the vortex flow field. The apparatus consists of a t [...]

SUBMERSIBLE PUMP TEST APPARATUS Model FM 13S
SUBMERSIBLE PUMP TEST APPARATUS Model FM 13S

The Sci-tech Submersible Pump Test Apparatus Model FM 13S has been designed to enable students to study the operation and performance characteristics of a typical centrifugal pump. The module consists of a variable speed centrifugal pump assem [...]

FLOATING BODY DISPLACEMENT APPARATUS Model 11A
FLOATING BODY DISPLACEMENT APPARATUS Model 11A

The Sci-tech Floating Body Displacement Apparatus Model FM 11A is a bench top unit and is designed to familiarize students about buoyancy force on floating bodies and to demonstrate the Archimedes principle. This is an important equipment for [...]

PRESSURE GAUGE CALIBRATOR Model FM 10
PRESSURE GAUGE CALIBRATOR Model FM 10

Sci-tech Dead Weight Pressure Gauge Calibrator Model FM 10 is a bench top dead weight pressure gauge calibrator consists of a precision machined piston and cylinder assembly mounted on levelling screws. A Bourdon gauge is supplied for calibrat [...]

METACENTRIC HEIGHT APPARATUS Model FM 08A
METACENTRIC HEIGHT APPARATUS Model FM 08A

Sci-tech Metacentric Height Apparatus Model FM 08A demonstrates the metacentric height of a floating body and the height variation is used with Hydraulic Bench Model MH100 or a separately supplied bowl. The equipment consists of a rectangular [...]

PRESSURE LOSSES IN BENDS & FITTINGS APPARATUS Model FM 05
PRESSURE LOSSES IN BENDS & FITTINGS APPARATUS Model FM 05

Study of pressure losses in bends and fittings in any pipe system is useful in view of the loss of head and consequent pumping power requirements. Sci-tech Pressure Loss in Bends and Fittings Apparatus Model FM05 is important equipment for any [...]

IMPACT OF JET APPARATUS Model FM 01
IMPACT OF JET APPARATUS Model FM 01

Sci-tech Impact of Jet Apparatus Model FM 01 has been designed to measure the force generated by the impingement of the jet of water on a stationary object and to demonstrate the principle of linear momentum. The apparatus can be used with the [...]

KAPLAN TURBINE TEST RIG Model FM 30
KAPLAN TURBINE TEST RIG Model FM 30

A transparent hollow cylinder made of acrylic is fitted in between the draft tube and the casing for observation of flow. Load is applied to the turbine with the help of rope brake arrangement so that the efficiency of the turbine can be calcu [...]

Drain Permeameter Model FM 25
Drain Permeameter Model FM 25

Sci-tech Drain Permeameter Model FM-36 is suited for use both as a teaching and demonstration tool and for laboratory testing and research.

Flow Visualization Channel MODEL FM 20
Flow Visualization Channel MODEL FM 20

The Sci-tech Flow Visualization Channel Model FM 20 is a bench top open channel unit and has been designed to conduct experiments related to open channel flows and to visualize stream line patterns over or around various objects.

Cavitation Demo Apparatus MODEL FM 19
Cavitation Demo Apparatus MODEL FM 19

The Sci-tech Cavitation Demonstration Apparatus Model FM 19 is a compact bench top unit and has been designed to visualize and study the cavitation phenomenon in water flow. The apparatus consists of a venturi - shaped test section made of cle [...]

Flow Meter Demonstration Apparatus MODEL FM 18
Flow Meter Demonstration Apparatus MODEL FM 18

The Sci-tech Flow Meter Demonstration Apparatus Model FM 18 is a mobile bench top unit and has been designed to demonstrate the working of the venture meter, orifice plate and the turbine flow meter. The apparatus consists of a piping network [...]

Orifice & Free Jet Flow Apparatus MODEL FM 17
Orifice & Free Jet Flow Apparatus MODEL FM 17

Sci-tech Orifice and Free Jet Flow Apparatus Model FM 17 has been designed to enable students to determine the co-efficient of discharge of sharp edged orifice and to study the trajectory profiles of water jets issuing from the orifice. It con [...]

Pelton Turbine Demonstration MODEL FM 16
Pelton Turbine Demonstration MODEL FM 16

Sci-tech Pelton Wheel Turbine Demonstrator Model FM 16 is an impulse transferred by the impact of water jet on the runner fitted with buckets. The change in the momentum of water jet results in the force on the buckets which turns the runner. [...]

Centrifugal Pump Test Apparatus MODEL FM 13
Centrifugal Pump Test Apparatus MODEL FM 13

The Sci-tech Centrifugal Pump Test Apparatus Model FM 13 has been designed to enable students to study the operation and performance characteristics of a typical centrifugal pump. The module consists of a variable speed centrifugal pump assemb [...]

Series & Parallel Pump Test Apparatus MODEL FM 12
Series & Parallel Pump Test Apparatus MODEL FM 12

The Sci-tech Series & Parallel Pump Test Apparatus Model FM 12 has been designed to enable students to study the operation and performance characteristics of typical centrifugal pumps connected by flexible tubing and valves to operate in b [...]

Stability Of A Floating Body Apparatus MODEL FM 11
Stability Of A Floating Body Apparatus MODEL FM 11

Sci-tech Stability of a Floating Body Apparatus Model FM 11 is a bench top unit designed to demonstrate the conditions for the stable, unstable and neutral equilibrium. The position of metacenter and hence the metacentric height can be varied [...]

Flow Channel Apparatus MODEL FM 09
Flow Channel Apparatus MODEL FM 09

Sci-tech Flow Channel Apparatus Model FM 09 is useful to carryout some basic experiments in fluid mechanics related to open channel flows and visualization of flow patterns around immersed bodies.

Metacentric Height Apparatus MODEL FM 08A
Metacentric Height Apparatus MODEL FM 08A

Sci-tech Metacentric Height Apparatus Model FM 08A demonstrates the metacentric height of a floating body and the height variation is used with Hydraulic Bench Model MH100 or a separately supplied bowl.

Hydrostatic Force & Centre of Pressure MODEL FM 08
Hydrostatic Force & Centre of Pressure MODEL FM 08

Sci-tech Hydrostatic Force & Center of Pressure Apparatus Model FM 08 demonstrates various principles of hydrostatics and is an important experimental set-up necessary for any Fluid Mechanics and Hydraulics Laboratory of an educational ins [...]

Pressure Loss in Pipes Apparatus MODEL FM 07
Pressure Loss in Pipes Apparatus MODEL FM 07

Sci-tech Pressure Loss in a Pipe Apparatus Model FM 07 has been designed to enable students to measure loss of head due to friction in a pipe and to study the effect of change in flow velocity. Laminar and turbulent flow regimes can be obtaine [...]

Fluid Mechanics: Osborne Reynold’s Apparatus MODEL FM 06
Fluid Mechanics: Osborne Reynold’s Apparatus MODEL FM 06

Sci-tech Osborne Reynolds Demonstration Apparatus Model FM 06 is a bench top flow visualization unit and has been designed to demonstrate the laminar,  transitional and turbulent flows. The apparatus consists of a vertical flow visualization g [...]

Fluid Mechanics: Pressure Loss in Bends & Fittings MODEL FM 05
Fluid Mechanics: Pressure Loss in Bends & Fittings MODEL FM 05

Sci-tech Pressure Loss in Bends and Fittings Apparatus Model FM05 is important equipment for any Fluid Mechanics and Hydraulics Engineering Laboratory of an educational institution.

Orifice Discharge Apparatus MODEL FM 04
Orifice Discharge Apparatus MODEL FM 04

Sci-tech Orifice Discharge Apparatus Model FM 04 has been designed to enable students to determine the co-efficient of discharge of sharp edged orifice and nozzles. It consists of a vertically mounted cylindrical transparent plastic water tank [...]

Bernoulli’s Theorem Demonstration Apparatus FM 03
Bernoulli’s Theorem Demonstration Apparatus FM 03

Sci-tech Bernoulli’s Theorem Demonstration Apparatus Model FM 03 is a bench top unit and has been designed to demonstrate the Bernoulli’s Theorem. The apparatus consists of a transparent venturi tube. Wall pressure tapings are provided along t [...]

Fluid Properties Apparatus Model MH 54
Fluid Properties Apparatus Model MH 54

This is a basic module which provides facilities to develop the understanding and knowledge of various fundamental principles and techniques required for the study of Fluid Mechanics and Hydraulics.

Hydrostatic Bench Model MH 48
Hydrostatic Bench Model MH 48

Several experiments in Fluid Mechanics and Hydraulics which are related to properties of fluids and hydrostatics can be carried out using the Sci-tech Hydrostatic Bench Model MH 48. This is a basic module which provides facilities to develop t [...]

Gas Turbine Engine Test Set-up Model GFM 85/80N
Gas Turbine Engine Test Set-up Model GFM 85/80N

Sci-tech Gas Turbine Engine Test Set-up Model GFM 85 includes engine that is the compact turbine engine, comprising a single stage radial compressor, combustion chamber and an axial flow turbine.

Two Stage Axial Flow Fan Demonstration Unit Model GFM 42
Two Stage Axial Flow Fan Demonstration Unit Model GFM 42

Sci-tech Two Stage Axial Flow Fan Demonstrator Trainer Model GFM 42 allows the investigation of a two-stage axial fan. A measuring device is used to determine the pressure and velocity distribution.

Axial Flow FanDemonstration Unit Model FM 83
Axial Flow FanDemonstration Unit Model FM 83

The Sci-tech Axial Flow Fan Demonstration Model FM 83 is a self contained bench top unit designed to demonstrate the working of axial flow fan and to conduct experiments to study the performance of a typical axial flow fan.

Fluid Mechanics: Friction Loss in Pipes Apparatus MODEL GFM 31
Fluid Mechanics: Friction Loss in Pipes Apparatus MODEL GFM 31

Sci-tech Friction Loss in Pipes Apparatus Model GFM 31 has been designed to enable student measure loss of head in pipes due to friction at various flow velocities or Reynolds numbers. The geometry and flow parameters have been selected to ena [...]

Fluid Mechanics: Laminar and Turbulant Pipe Flow Apparatus MODEL GFM 29
Fluid Mechanics: Laminar and Turbulant Pipe Flow Apparatus MODEL GFM 29

Sci-tech Laminar and Turbulent Pipe Flow Apparatus Model GFM 29 is a floor mount unit and has been designed to demonstrate laminar and turbulent pipe flows over a wide range of flow conditions. The apparatus has been designed to enable student [...]

Universal Pump Test Trainer MODEL GFM 23
Universal Pump Test Trainer MODEL GFM 23

The Sci-tech Universal Pump Test Bench Model GFM 23 is designed to enhance student study of both rotor dynamic and positive displacement pumps, and is supplied with most common example of each type, such as centrifugal pump and gear pump. The [...]

Hydraulic Valves Test Stand Model FMCS-HVT
Hydraulic Valves Test Stand Model FMCS-HVT

Sci-tech Hydraulic Valve Test Stand Model FMSC-HVT is used for pressure testing of various types of valves and fittings.  

Butterfly Valve & Non-Return Valve Assembly Model FMCS-BVNR
Butterfly Valve & Non-Return Valve Assembly Model FMCS-BVNR

Sci-tech Butterfly Valve & Non-Return Valve Assembly Model FMSC-BVNR are used where flow reversal is not permitted. They must fully seal off the reverse direction while offering the lowest possible resistance in the forward flow direction. [...]

Safety Relief Valve (Cut Section) Model FMCS-SV
Safety Relief Valve (Cut Section) Model FMCS-SV

Safety Relief Valve (Cut Section)

Gate Valve (Cut Section) Model FMCS-GV
Gate Valve (Cut Section) Model FMCS-GV

Gate Valve (Cut Section)

Globe Valve (Cut Section) Model FMCS-GL
Globe Valve (Cut Section) Model FMCS-GL

Globe Valve (Cut Section)

Diaphragm Valve (Cut Section) Model FMCS-DV
Diaphragm Valve (Cut Section) Model FMCS-DV

Diaphragm Valve (Cut Section)

Check Valve (Cut Section) Model FMCS-CV
Check Valve (Cut Section) Model FMCS-CV

Check Valve (Cut Section)

Butterfly Valve (Cut Section) Model FMCS-BV
Butterfly Valve (Cut Section) Model FMCS-BV

Butterfly Valve (Cut Section)

Ball Gate Valve Assembly Model FMCS-BV
Ball Gate Valve Assembly Model FMCS-BV

Sci-tech Ball Gate Valve Assembly Model FMSC-BV of the design presented here, are used to shut off and restrict the flow of media.

Plate & Frame Filter Press Apparatus MODEL FM 74
Plate & Frame Filter Press Apparatus MODEL FM 74

‘Sci-tech Plate and Frame Filter Press Apparatus Model FM 74 is used in the beverage industry, for example, to clarify intermediate products. A suspension of diatomite and water (recommended) is prepared in a tank. A pump ensures that the soli [...]

Water Hammer in Pipes Apparatus MODEL FM 71
Water Hammer in Pipes Apparatus MODEL FM 71

Sci-tech Water Hammer in Pipes Apparatus Model FM 71 can be used to study water hammer and pressure waves in long pipelines. Water hammer is generated by closing a valve at the end of the pipe section. The water hammer is then reflected to the [...]

Visualization of Streamlines MODEL FM 133
Visualization of Streamlines MODEL FM 133

The laminar, two-dimensional flow in Sci-tech Visualization of Streamlines Model FM 133 is a good approximation of the flow of ideal fluids: the potential flow.

Cake & Depth Filtration Apparatus Model FM 77
Cake & Depth Filtration Apparatus Model FM 77

With Sci-tech Cake and depth Filtration Apparatus Model FM 77 the processes in depth filtration and cake filtration can be observed and investigated. The suspension (water and diatomite as the solid) flows from the hopper into the top of the f [...]

Separation in Sedimentation Tank Apparatus Model FM 128
Separation in Sedimentation Tank Apparatus Model FM 128

Sci-tech Separation in Sedimentation Tank Apparatus Model FM 128 makes it possible to investigate the separation of solids from a suspension in a sedimentation tank.

Activated Sludge Process Apparatus Model FM 127
Activated Sludge Process Apparatus Model FM 127

Sci-tech Activated Sludge Process Apparatus Model FM 127 is the most important biological process in water treatment. FM 127 enables this process to be demonstrated.

Precipitation & Flocculation Apparatus Model FM 126
Precipitation & Flocculation Apparatus Model FM 126

Sci-tech Precipitation and Flocculation Apparatus Model FM 126 demonstrates the removal of dissolved substances by precipitation and flocculation with subsequent sedimentation.

Characteristics Variables of Hydraulic Turbo-machines Apparatus Model FM 104
Characteristics Variables of Hydraulic Turbo-machines Apparatus Model FM 104

Sci-tech Characteristics Variables of Hydraulic Turbo-machines Apparatus Model FM 104 can be used to investigate a centrifugal pump. Experiments can be performed on two key water turbine designs: Pelton, Francis and Kaplan turbine, available a [...]

Fluidised Bed Formation Apparatus Model FM 91
Fluidised Bed Formation Apparatus Model FM 91

Sci-tech Fluidized Bed Formation Apparatus Model FM 91 features two transparent test tanks for fluidized bed formation in water and air. A diaphragm pump delivers water from a storage tank into the bottom of the left side test tank. The water [...]

Pneumatic Transport Apparatus Model FM 123
Pneumatic Transport Apparatus Model FM 123

Sci-tech Pneumatic Conveyor/Transport Apparatus Model FM 107 can be used to transport dispersed solids over great distances in pipelines. The solid is transported out of a feed tank via a vibrating trough into an air flow. An interchangeable i [...]

Mixing Process by Stirring Model FM 96
Mixing Process by Stirring Model FM 96

  During stirring, the continuous phase is liquid. With Sci-tech Mixing Process by Stirring Model FM 96 the production of solutions (solid dissolved in liquid), emulsions (mixture of immiscible liquids) and suspensions (insoluble solid in [...]

Flow of Bulk Solids from Silos Model FM 120
Flow of Bulk Solids from Silos Model FM 120

Sci-tech Flow of Bulk Solids from Silos Apparatus Model FM 120 provides a practical demonstration of the types of discharge from different silos: mass flow, funnel flow and arching. The type of discharge that occurs is dependent on the flow pr [...]

Flow of Bulk Solids from Silos Apparatus Model FM 120
Flow of Bulk Solids from Silos Apparatus Model FM 120

Sci-tech Flow of Bulk Solids from Silos Apparatus Model FM 120 provides a practical demonstration of the types of discharge from different silos: mass flow, funnel flow and arching. The type of discharge that occurs is dependent on the flow pr [...]

Suspension Production Unit Model FM 119
Suspension Production Unit Model FM 119

Sci-tech Suspension Production Unit Model FM 119 provides the experimental filtration units with a suspension of diatomite and water (recommended). It is prepared in the stirred tank. The stirrer ensures that the solid remains suspended and do [...]