Digital Fatigue Testing Machine Model MT 063
Digital Fatigue Testing Machine Model MT 063
Sci-tech Digital Fatigue Testing Machine Model MT 063 is used to test the fatigue strength of materials and to draw S-N diagram by research institutes, laboratories, material manufactures and various industries. This is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8mm dia. specimen is held in special holders at its end loaded such that it experiences a uniform bending moment. The specimen is rotated at 1440rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution. The bending moment is applied with a lever system and can be easily changed by moving a weight over the lever. Total number of revolutions at which the specimen fails is recorded by a digital counter. An interlocking system puts off the motor at specimen failure.
| Size: | 85cm x 65cm x 90cm (LxWxH) |
| Weight: | 45 kg |
Item Description
Salient Features
- An interlocking system provided puts off the motor at specimen failure.
- Light weight, compact size and very simple design.
- Table model, no need of foundation
- Simple lever system of changing load
- Automatically shuts down when the specimen fractures
- Calibration is in Nm
- ‘Sci-Cal’ computer interface optional
Sci-tech Digital Fatigue Testing Machine Model MT 063 is used to test the fatigue strength of materials and to draw S-N diagram by research institutes, laboratories, material manufactures and various industries. This is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8mm dia. specimen is held in special holders at its end loaded such that it experiences a uniform bending moment. The specimen is rotated at 1440rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution. The bending moment is applied with a lever system and can be easily changed by moving a weight over the lever. Total number of revolutions at which the specimen fails is recorded by a digital counter. An interlocking system puts off the motor at specimen failure. Machine meets requirement of IS:5075-1969.
Technical Specifications
Technical Specifications
- Maximum bending moment 20Nm
- Bending moment adjustable 2.5-20Nm
- Ranges Range-I :2.5-12.5Nm
- Range-II :12.5 ~ 20Nm
- Gripping dia of specimen 12mm
- Testing dia of specimen 8mm
- Rotating speed 14400 rpm
- Accuracy of applied bending moment ±1%
- Digital counter 8 Digital
- Power required 0.5 HP
- Standard 8mm/6mm/5mm diameter SS304, Carbon Steel, Aluminum specimens supplied. Other specimen against request.
- Power supply 1ph 220V or 3ph, 440, V, 50Hz, A.C.
- Overall size (approx.) 600L.X500W X600H mm
- Weight (approx.) 40kg
Optional
‘Sci-Cal’ Computer Control Software & Interface
Model Number
MT 063
See also different:
Sci-tech Air Flow Studies Apparatus Model FM 034 is a self-contained and compact unit designed to demonstrate the basic fluid mechanics principles by conducting measurements of important characteristics associated with a typical industrial air [...]
