Rig for Installation, Alignment and Replacement of Belt Drive Model MT 024
Rig for Installation, Alignment and Replacement of Belt Drive Model MT 024
Sci-tech Rig for Installation, Alignment and Replacement of Belt Drive Model MT 024 is designed for training on belt & chains drives. The rig allows students / technicians to study Alignment and Tensioning of the drives. The base unit consists of Aluminum profiles structure with aluminum base plate on top for assembling the modules during training. The drive system consists of a bi-directional AC motor mounted on adjustable base. The motor can be coupled with different training modules supplied with the system. The modules included are Belt drive module, Chain drive module & gear module. An acrylic enclosure is provided to cover the rig during operation for operator safety.
| Size: | 80cm x 60cm x 70cm (LxWxH) |
| Weight: | 85 kg |
Item Description
Features
- Mobile, Compact unit with all necessary accessories
- Standard industrial components used for building the trainer
- Modular design allows different Mechanical drives to be studied in single unit.
Sci-tech Rig for Installation, Alignment and Replacement of Belt Drive Model MT 024 is designed for training on belt & chains drives. The rig allows students / technicians to study Alignment and Tensioning of the drives. The base unit consists of Aluminum profiles structure with aluminum base plate on top for assembling the modules during training. The drive system consists of a bi-directional AC motor mounted on adjustable base. The motor can be coupled with different training modules supplied with the system. The modules included are Belt drive module, Chain drive module & gear module. An acrylic enclosure is provided to cover the rig during operation for operator safety.
Technical Specifications
TECHNICAL SPECIFICATIONS
- The drive rig structure Size:
✓ Minimum 0.8m (L) x 0.6m (W)x 0.8m (H), Standard aluminium profile size of 40×40
✓ Aluminium base plate of minimum 12mm (or ½”) thickness
✓ The drive rig structure has 3 layers that come with 4 caster wheels and 4 adjustable leg stands.
- The drive rig is designed with belt or chain drive on a modular base plate to test run with the motor independently.
- The drive rig consists of 1 unit of AC induction motor with:
✓ 230V single phase
✓ Horsepower approx. 0.75hp
✓ Rated speed approx. 1400rpm
✓ Reversible rotation
✓ Manual speed control
✓ Foot mount
- The drive rig consists of 1 set of V-belt mechanism with:
✓ Industrial V-belt section type A
✓ 2 units of pulley with ratio 2:1″
- The drive rig shall consist of 1 set of chain mechanism with:
✓ Industrial standard roller chain drive (pitch 15mm)
2 units of steel sprocket with ratio 2:1
- The drive rig consists of 6 units of pillow block bearing with: Shaft diameter minimum 20mm
- The drive rig consists of 1 unit of right angle gearbox with: Gear reduction ratio of 2:1
- The drive rig consists of 2 units of coupling for: Induction motor Gearbox
- The drive rig consists of 1 unit of enclosure: Material is normal acrylic with minimum 5mm thick 4 units of handle
EXPERIMENTAL CAPABILITIES:
The drive rig provides training on belt as well as chains drives:
- Alignment
- Tensioning
Model Number
MT 024
See also different:
Sci-tech Verification of Stress Hypothesis Model MT 140 is used to verify these comparative stress hypotheses on test specimens made of various metals. For the purpose, a multi-axial stress state is produced at a point on the specimen and the [...]
