ELECTRO-PNEUMATIC TRAINER Model HT 006
ELECTRO-PNEUMATIC TRAINER Model HT 006
Sci-tech Electro-Pneumatic Trainer Model HT 006 is a very versatile self – contained training package for the teachers and students in advanced pneumatics. It is designed for fail safe operation and ease of learning. Sci-tech Advanced Pneumatic Trainer meets the requirements of providing practical “HANDS ON” training and can be used both as an experimental kit and as a demonstrator. Various basic / advanced pneumatic circuits can be built easily due to special design of the trainer. The commonly used industrial pneumatic components and some electro – pneumatic components are provided for preparing various pneumatic circuits.
| Size: | 100cm x 50cm x 120cm (LxWxH) |
| Weight: | 65 kg |
Item Description
Features
- Pneumatic Trainer consists of flat control panel with general purpose component area on both sides and Mobile Table provided built using 40mm Aluminum profile rack.
- Facility to mount valves and cylinders with a provision for fixing hoses through push on connector & nylon tube facing the front of simulator.
- Valves can be easily attached/detached
- CE marked branded Components are used
- Suitable for working at 6bar pressure
- Electrical Control panel is a 30X30mm Aluminum profile rack with sturdy table top flat panels
- ABS plastic enclosed Panel Board with mimic diagram
- Drawer at the bottom on each side to keep components.
- All input & output are terminated in 4mm shrouded connector,
- 4mm Shrouded Patched Chords
Sci-tech Electro-Pneumatic Trainer Model HT 006 is a very versatile self – contained training package for the teachers and students in advanced pneumatics. It is designed for fail safe operation and ease of learning. Sci-tech Advanced Pneumatic Trainer meets the requirements of providing practical “HANDS ON” training and can be used both as an experimental kit and as a demonstrator. Various basic / advanced pneumatic circuits can be built easily due to special design of the trainer. The commonly used industrial pneumatic components and some electro – pneumatic components are provided for preparing various pneumatic circuits.
Many experiments can be performed. A detailed and comprehensive instruction manual is provided long with the trainer
Technical Specifications
Specifications
- FR+L unit (Isolating valve +Regulator)
- Filter Regulator Lubricator with 10 bar Pressure Gauge
- Non return Valve with Slide Isolation valve
- 8mm PU QRC connector
- Air Compressor (Silent Type) (OPTIONAL)
- 2HP 1 Phase 230V AC Motor
- 24 Litter Cylinder with Pressure Gauge
- 8 bar Pressure Switch for Auto start & stop.
- 10 bar pressure relief valve with 10 bar Gauge
- 8mm PU QRC connector
- To be placed at ground level
Electrical Panel
- DC Power Supply & Switch Panel
- 230V/50Hz AC Socket
- 24V/2A DC Output
- 5 no’s of Toggle Switch /2A
- Dual Timer Panel
- Dual Cyclic Timer Output
- 4 no’s of NO,NC control contacts /2A
- Switch Panel
- Two nos. of SPDT Switch Red, 230V/4A
- Two nos. of SPDT Switch Green, 230V/4A
- SPDT Emergency Switch, 230V/4A
- Illuminated Push Switch, 230V/4A
- Relay & Indicator Panel
- 3 numbers of Relay Output
- 5A NO,NC control contacts with coil voltage 24V/100mA
- 230V / 22mm Led Indicators (3nos)
List of Components
- ¼ inch B.S.P, 5 ports, 2 position both side pilot D.C. Valve – 2 No’s
- ¼ inch B.S.P flow regulator with check – 2 No’s
- ¼ inch B.S.P Shuttle valve – 1 No
- 1/8 inch B.S.P, 3/2 way push button operated spring off set D.C. Valve – 4 No’s
- 1/8 inch B.S.P, 3/2 way roller operated spring off set D.C. Valve – 4 No’s
- Two pressure valve (AND GATE) – 1 No
- Quick exhaust Valve – 1 No
- 1\4” B.S.P, F-R-L unit – 1 No
- Pressure Gauge – 1 No
- Double acting cylinder – 2 No’s
- Single acting cylinder with spring return – 1 No
Supplied with necessary accessories like PU tubes of dia 4 and dia 6mm; Tees and Plugs, Test Cables as well as 1 pipe cutter, Splicers, Hardware tools, etc. as per requirements.
Instruction cum Experiments Manual: Supplied in soft & hard copies, with experiment sheets
Requirements:
- Mains Input power 220~240V, 50Hz, 1Ph
- Industrial Grade Oil for Hydraulic Power Pack.
Model Number
HT 006
See also different:
The Sci-tech Universal Pump Test Bench Model GFM 23 is designed to enhance student study of both rotor dynamic and positive displacement pumps, and is supplied with most common example of each type, such as centrifugal pump and gear pump. The [...]
* Study of the concept of double & single lagging. * study of effects of different insulating material combinations. * Electrical input control & measurement with complete panelised instruments. * Digital Temperature Indicator.
Sci-tech Machine Tools Control Circuit Technology Trainer Model ELTR 021 is designed to provide student with full training on study and fault finding in machine tool control circuits. The trainers enables theory and practical experiments to be [...]