The trainer is suitable to provide studies of energy distribution & management in a typical industrial building.
Provides for all normal types of energy source, sink & transfer mechanism, control over major variables & floor monitoring facilities arranged as rows.
– Provides facility for computer control and monitoring, also manual assignment.
– Each panel has ABS molded plastic sturdy enclosure, and colorful screwless overlays showing circuit diagram & its connection tag numbers for easy understanding and connections.
– Set of Instructor Guide & Student Workbook.
– Aluminum profile sturdy flat panel (table top) system showing various segregated loads found in industrial building arranged in rows.
– Type of Loads
Arranged in segregated rows with independent power measuring meters and automated switch gears for
transfer mechanism, through use of PLC & SCADA.
– Industrial load or IT load
– HVAC chiller / pumping / Air handling units
– Misc. load like lifts, canteen etc.
– Water pumping
– Input 3 phase DOL Starter panel (EMT1)- 4 Nos. [10 Shrouded Banana]
– 4 pole MCB of 415 V/2A .
– DOL 9A Contactor with 230V / 50 Hz / 11VA COIL .
– Bimetallic thermal O/L relay with range 1.4A – 2.3A .
– Integrated AC 3 phase measurement panel (EMT 34) – 4 Nos. [14 Shrouded Banana]
– Consist of 96 X 96mm Digital meter for 3. Measures V, I, PF (0.2 lag – unity 0.2 lead), Hz. Hence separate analog wattmeters 3 are not needed.
– Current specs for 3 phase meter = 5A
– Modbus communication over RS485
– LG master J120S series
– K7M DR 30UE (18DI + 12O
– Memory 2K step (EEPROM) 0.4 usec per instruction
– Software : KGLWIN supports ladder programming & monitoring /troubleshooting & instruction set.
– Communication : RS232C for Ladder Programming, RS485 with LG protocol ports for Multidrop Networking.
– Operating voltage : 110/220Vac + 20% 50/60 Hz, PLC (55 VA), 24VPS (75VA)
– Converter cum Distribution Panel / CDP
– Total 64 No. of 4 mm Banana Sockets, 24 for Digital Inputs, 16 for Digital Outputs, 4 for Analog I/O & 16 for +24V Supply & GND
– Facilitates easy replacement / maintenance / wiring.
– 3 Simulation cum Extension Panel / SEP
a) For Digital Outputs :
– 8 No. of LED Indicator, 8 No. of Relay Panel with coil rating 24V and contact rating of 220V AC / 1 Amp.(Resistive).
b) For Digital Inputs :
– 8 No. of Digital Input. (4 toggle switches + 4 push buttons)
– Power Supply Panel
– 24V / 2 Amp. SMPS type Supply, 16 No. of 4mm Banana Sockets for extension, Power ON indicator / Switch
– SCADA Software
– SCADA software development suite supplied on installable CD. Supports 25 tags, with USB hardware lock provided P4/XP needed but PC not in scope of supply. Interfaces with PLC through RS232C comport.
– Uninterruptable Power Supply [UPS]
– Output Voltage : 220V +10% / 500VA
– Quazi Waveforms
– Mechanical Dimensions & Weight
– 1170(L) x 300(W) x 990(H)
– 45 Kilograms