Satellite Communication Lab (2.4GHz & 5.8GHz) Model TCM 017 Series
Satellite Communication Lab (2.4GHz & 5.8GHz) Model TCM 017 Series
Sci-tech Satellite Receiving Station/System Lab Model TCM 017-7 provide an in-depth look at basic satellite receiving techniques and concepts. It consists of uplink transmitter, satellite link and downlink receiver, which is conveniently placed in the laboratory. The satellite placed at an elevated position if needed. The satellite transponder receives signals from uplink transmitter and retransmit at different frequencies to a downlink receiver. The uplink frequencies selectable and carry three signals video/data, audio/voice/tone (A1) and audio/voice/tone (A2) simultaneously. Any broadband signal or digital / analog data or square wave from function generator are transmitted through this satellite link. A large number of experiments are able to be conducted very easily on the Satellite Receiving System.
Item Description
Uplink Transmitter
– Transmit 3 signals simultaneously at each frequency.
– Frequency : 2.4, 2.427, 2.454 & 2.481 GHz (SCL-8: 5.8GHz)
– Frequency up down select switch and 4 LED’s indication.
– PLL Controlled ISM Band
– RF output level : 0 dBm nominal
– Path Loss : 0 to 30dB variable attenuation
– Audio 1 : Int. 1KHz sine wave / Ext
– Audio 2 : Int. 1KHz sine wave / Ext
– Video i/p : Colour / Monochrome Camera / VCD compatible
– Input : upto 5 MHz sine waveform & upto 100KHz Digital
– Detachable dish antenna.
– Transmit audio, video, digital/analog data, PC data, tone, square wave from function generator, etc.
– Separate terminals for inputs.
– Power supply 220V + 10% 50Hz.
Satellite Link :
Transponder Uplink
– Frequency : 2.4, 2.427, 2.454 & 2.481 GHz (SCL-8: 5.8GHz)
– Frequency up down select switch and 4 LED’s indication.
– PLL Synthesized ISM Band
– Sensitivity : -70dBm
– Detachable dish antennas.
Technical Specifications
Transponder Downlink
– Frequency : 2.4, 2.427, 2.454 & 2.481 GHz (SCL-8: 5.8GHz)
– Frequency up down select switch and 4 LED’s indication.
– PLL Synthesized ISM Band
– RF output level : 0 dBm nominal
– Path Loss : 0 to 30dB variable attenuation
– Link Fail : Switch to disable link
– Signal Delay: 0-0.6 second (approx) on Audio1
– Detachable dish antennas.
– Power supply 220V + 10 % 50 Hz
Downlink Receiver :
– Frequency : 2.4, 2.427, 2.454 & 2.481 GHz (SCL-8: 5.8GHz)
– Frequency up down select switch and 4 LED’s indication.
– PLL Controlled ISM Band
– Sensitivity : -70dBm
– Audio 1out : Speaker inbuilt/output
– Audio 2 out : Speaker inbuilt/output
– Video Out : to monitor/ CRO compatible
– Digital : Max 100KHz typical TTL
– IF output : 479.5 MHz
– Detachable dish antenna.
– Power supply 220V + 10% 50 Hz
Standard Accessories :
Operating manual : 01 No
BNC to A / V cable : 04 Nos.
Parabolic Dish Antenna with mount & cable with BNC termination : 04 Nos.
BNC to BNC cable : 02 Nos.
BNC to RS232 for PC Communication (Tx) : 01 No.
BNC to RS232 for PC Communication (Rx) : 01 No.
Microphone : 01 No.
B/W mini portable TV : 01 No.
Suitable B/W Camera : 01 No.
See also different:
Sci-tech Basic Communication Trainers TCM 005 Series offer students understand basic concepts of communication through exhaustive experiments. The Kits offer on-board necessary signal generator and power supply and silk screen printed circuit [...]
