Building Management System Trainer Model ELTR 005

  • ‘Sci-tech’ Building Management System Trainer Model ELTR 005 is suitable to provide studies of energy distribution & management in a typical industrial building.
  • Provides for all normal types of energy source, sink & transfer mechanism, control over major variables & floor monitoring facilities arranged as rows.
  • Provides facility for computer control and monitoring, also manual assignment.
  • Each panel has ABS molded plastic sturdy enclosure, and colorful screwless overlays showing circuit diagram & its connection tag numbers for easy understanding and connections.
  • Set of Instructor Guide & Student Workbook.
  • Aluminum profile sturdy flat panel (table top) system showing various segregated loads found in industrial building arranged in rows.

Size: 117cm x 30cm x 99cm (LxWxH)
Weight: 45 kg

Item Description

  • The trainer is suitable to provide studies of energy distribution & management in a typical industrial building.
  • Provides for all normal types of energy source, sink & transfer mechanism, control over major variables & floor monitoring facilities arranged as rows.
  • Provides facility for computer control and monitoring, also manual assignment.
  • Each panel has ABS molded plastic sturdy enclosure, and colorful screwless overlays showing circuit diagram & its connection tag numbers for easy understanding and connections.
  • Set of Instructor Guide & Student Workbook.
  • Aluminum profile sturdy flat panel (table top) system showing various segregated loads found in industrial building arranged in rows.

Technical Specifications

TECHNICAL SPECIFICATIONS

  • Type of Loads

Arranged in segregated rows with independent power measuring meters and automated switch gears for transfer mechanism, through use of PLC & SCADA.

  • Illumination
  • Industrial load or IT load
  • HVAC chiller / pumping / Air handling units
  • load like lifts, canteen etc.
  • Water pumping

 

Input 3 phase DOL Starter panel Module – 4 Nos.

  • 4 pole MCB of 415 V/2A .
  • DOL 9A Contactor with 230V / 50 Hz / 11VA COIL .
  • Bimetallic thermal O/L relay with range 1.4A – 2.3A .
  • Integrated AC 3 phase measurement panel Module – 4 Nos.
  • Consist of 96 X 96mm Digital meter for 3f. Measures V, I, PF (0.2 lag – unity 0.2 lead), Hz.
  • Current specs for 3 phase meter = 5A
  • Modbus communication over RS485
  • PLC
  • LG master J120S series
  • K7M DR 30UE (18DI + 12O
  • Memory 2K step (EEPROM) 0.4 usec per instruction
  • Software: KGLWIN supports ladder programming & monitoring / troubleshooting & instruction set.
  • Communication: RS232C for Ladder Programming, RS485 with LG protocol ports for Multidrop Networking.
  • Operating voltage: 110/220Vac + 20% 50/60 Hz, PLC (55 VA), 24VPS (75VA)

 

  • Converter cum Distribution Panel / CDP
  • Total 64 No. of 4 mm Banana Sockets, 24 for Digital Inputs, 16 for Digital Outputs, 4 for Analog I/O & 16 for +24V Supply & GND
  • Facilitates easy replacement / maintenance / wiring.

 

  • 3 Simulation cum Extension Panel / SEP
  1. a) For Digital Outputs:
  • 8 No. of LED Indicator, 8 No. of Relay Panel with coil rating  24V and contact rating of  220V AC / 1 Amp.(Resistive).
  1. b) For Digital Inputs:
  • 8 No. of Digital Input. (4 toggle switches + 4 push buttons)
  • Power Supply Panel
  • 24V / 2 Amp. SMPS type Supply, 16 No. of 4mm Banana Sockets  for extension, Power ON indicator  / Switch
  • SCADA Software
  • SCADA software development suite supplied on installable CD. Supports 25 tags, with USB hardware lock provided P4/XP needed but PC not in scope of supply. Interfaces with PLC through RS232C comport.
  • Uninterruptable Power Supply [UPS]
  • Output Voltage: 220V +10% / 500VA
  • Quasi Waveforms
  • Mechanical Dimensions & Weight
  • 1170(L) x 300(W) x 990(H)
  • 45 Kilograms

Model Number

ELTR 005