Semiconductor Characteristics Trainers Model 039 Series
Home » Products » Semiconductor Characteristics Trainers Model 039 Series
Semiconductor Characteristics Trainers Model 039 Series
- CHARACTERISTICS OF SEMICONDUCTOR Model ETR 039A
2. CHARACTERISTICS OF TRANSISTORS (CB, CC, CE) MODEL ETR 039B
3. CHARACTERISTICS OF FET, MOSFET, IGBT MODEL ETR 039C
4. CHARACTERISTICS OF UJT, PUT, OPTO MODEL ETR 039D
5. CHARACTERISTICS OF SCR & TRIAC ODEL ETR 039E
6. LDR, PHOTODIODE, PHOTOTRANSISTOR, SOLAR CELL, CHARACTERISTICS TRAINER MODEL ETR 039E
Size: | 40cm x 25cm x 10cm (LxWxH) |
Weight: | 5 kg |
Item Description
CHARACTERISTICS OF SEMICONDUCTOR Model ETR 039A
CHARACTERISTICS OF TRANSISTORS (CB, CC, CE) MODEL ETR 039B
CHARACTERISTICS OF FET, MOSFET, IGBT MODEL ETR 039C
CHARACTERISTICS OF UJT, PUT, OPTO MODEL ETR 039D
CHARACTERISTICS OF SCR & TRIAC ODEL ETR 039E
LDR, PHOTODIODE, PHOTOTRANSISTOR, SOLAR CELL, CHARACTERISTICS TRAINER MODEL ETR 039E
SOLAR CELL CHARACTERISTICS TRAINER MODEL ETR 039E
Technical Specifications
CHARACTERISTICS OF SEMICONDUCTOR Model ETR 039A
- Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K.
- One LED indicator to indicate Power input.
- On-board Semiconductor Devices
- Silicon Diode
- Germanium Diode
- Zener Diode.
- Light Emitting Diode.
- DIAC
- Variable DC power supply : 0 to ± 15 V/150mA
- Variable DC power supply : 0 to ± 30 V/150mA
- All interconnections are made using 2mm banana Patch cords.
- Bare board Tested Glass Epoxy PCB is used.
- Set of 2mm Patch cords for interconnections
CHARACTERISTICS OF TRANSISTORS (CB, CC, CE) MODEL ETR 039B
- Variable Power Supply of 0 to +15 DC
- Variable Power Supply of 0 to +30 DC
- One LED indicator to indicate Power input.
- On-board Circuits
- CE Configuration.
- CC Configuration.
- CB Configuration.
- All interconnections are made using 2mm banana Patch cords.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy PCB is used.
- Set of 2mm Patch cords for interconnections
CHARACTERISTICS OF FET, MOSFET, IGBT MODEL ETR 039C
- Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K.
- One LED indicator to indicate Power input.
- On-board Semiconductor Devices
- MOSFET
- FET/JFET
- IGBT
- Variable DC power supply : 0 to + 15 V/150mA
- Variable DC power supply : 0 to + 30 V/150mA
- All interconnections are made using 2mm banana Patch cords.
- Bare board Tested Glass Epoxy PCB is used.
- Set of 2mm Patch cords for interconnections
CHARACTERISTICS OF UJT, PUT, OPTO MODEL ETR 039D
- Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K.
- One LED indicator to indicate Power input.
- On-board Semiconductor Devices
- OPTO Configuration
- UJT Configuration
- PUT Configuration
- Variable DC power supply : 0 to + 15 V/150mA
- Variable DC power supply : 0 to + 30 V/150mA
- All interconnections are made using 2mm banana Patch cords.
- Bare board Tested Glass Epoxy PCB is used.
- Set of 2mm Patch cords for interconnections
CHARACTERISTICS OF SCR & TRIAC ODEL ETR 039E
- Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K.
- Load of 1K, 5W resistance
- One LED indicator to indicate Power input.
- On-board Circuits
- SCR Configuration
- TRIAC Configuration
- Variable DC power supply : 0 to + 15 V/150mA
- Variable DC power supply : 0 to + 30 V/150mA
- All interconnections are made using 2mm banana Patch cords.
- Bare board Tested Glass Epoxy PCB is used.
- Set of 2mm Patch cords for interconnections
LDR, PHOTODIODE, PHOTOTRANSISTOR, SOLAR CELL CHARACTERISTICS TRAINER MODEL ETR 039E
- Resistance Block consisting of One Resistance of 1K and Two Potentiometer of 100K.
- One LED indicator to indicate Power input.
- On-board Circuits
LDR-Configuration - Lamp Block
- Solar Cell Configuration
- Photo Transistor/ Photo Diode Configuration
- Fixed DC Power Supply: 0 to +12V
- All interconnections are made using 2mm banana Patch cords.
- Bare board Tested Glass Epoxy PCB is used.
- Set of 2mm Patch cords for interconnections
Model Number
ETR 039 Series