Gas Absorption & Splitting Process Trainer Model TH 098
Gas Absorption & Splitting Process Trainer Model TH 098
Sci-tech Gas Absorption & Splitting Process Trainer Model TH 098 An Automated Absorption and Stripping Pilot Plant allows in- depth study of the operation of a modern absorption and stripping plant. The equipment has been designed for students to gain theoretical and practical knowledge of the varying operating parameters within the Absorption and Stripping process.
Item Description
Model TH 098 has been designed and manufactured to incorporate all current safety standards. It has been designed to study the mass transfer from a gaseous phase to a liquid phase (absorption) and liquid phase to a gaseous phase (stripping).
The absorbing liquid is fed by a metering pump to the top of a column with glass Raschig rings packing.
The gaseous phase is the result of the mixture between the gas to be absorbed and a carrier gas. The flow rates of these two gases are measured by mass flowmeters.
Model TH 098 includes a PID controller that controls the flow rates of gases automatically using two pneumatic valves.
Options for configuration detailed under the Recommended Accessories.
Technical Specifications
All devices, components and instrumentation are included for the absorption and stripping cycle
operation. Industrial instruments and sensors are used to allow students to become familiar with their
operation.
– Column with a height of 1000 mm packed with Raschig rings
– Heat exchanger with an exchange surface of 0.5 m2 installed at the bottom of the column
– Feed tank with a capacity of 30 litres
– 3x electronic temperature indicators
– 3x pneumatic automated control valves
– Metering pump with a flow rate of 270 litres per hour including a pneumatic actuator that can be controlled by a signal of 0.2 to 1 bar
– Emergency stop button
– 2x pneumatic control valves Cv = 0.2 and 0.08
– 3x Electro-pneumatic converters with signals 4 to 20 mA and 0.2 to 1 bar
– Electronic thermal mass flow-meter with a range of 0 to 600 litres per hour and electronic display for measuring the flow rate of the gas to be absorbed
– Microprocessor digital PID controller with serial card
– Electronic thermal mass flow-meter with a range of 0 to 6000 litres per hour and electronic
display for measuring the flow rate of the carrier gas
– Electronic differential pressure transmitter with a range of 0 to 200 mm H2O and 4-20 mA output signal
– 3x digital thermocouples with pt100 probes protected by stainless steel shield sleeves
– Pipework manufactured from stainless steel
– Supervision software for Windows to control:
» On-Off signals
» Analogue signals from the PID controller
» Real-time trend
» Historical trend
