Force Transducer With Signal Conditioner Model PCT 108
Force Transducer With Signal Conditioner Model PCT 108
The development of automatic weighting, packaging and dosing systems made the force sensor one of the most used transducers in the industrial field. In this context, the experiment board model Scitech Force Transducer with Signal Conditioner Model PCT 108, has been designed to enable the development of experiments on subjects concerning force transducers and conditioning systems of the signal supplied by the same transducers.
Item Description
Experimental Capabilities
– Characteristics of force transducers;
– Transducers based on elastic reaction;
– Sensors using resistive strain gages;
– Sensors using semiconductor strain gages;
– Load cells;
– Transducers based on piezoelectricity;
– Signal conditioners used as force transducers;
– Calibration of the signal conditioner;
– Detection of the “force/output voltage” characteristic curve;
– Plotting of the best curve of the transducer-conditioner;
– Detection of the measurement variation at the load cell temperature variation;
– Detection of the measurement variation at the conditioner temperature variation;
– Analysis and use of the supervision software with Personal Computer
Technical Specifications
Front panel in insulating material, with silk screen printed diagram of the different circuit blocks of the
module and electrical diagram of each circuit;
• Front panel in insulating material, with silk screen printed diagram of the different circuit blocks of
the module and electrical diagram of each circuit;
• Terminals for the connections and measurements;
• Signal conditioning with bridge and operational amplifiers for matching-filtering;
• Voltage reference for the bridge: linear, inner;
• Force transducer: – Input force range: 0 ÷ 20 Kg
– Output voltage range: 0 ÷ 8 V – Linearity: 0.3%
• The generation of the physical variable (force) consists of:
– Metal container
– Load cell – Sample weights
• Connection cable of the module to an 8-pole external unit type DIN 270
Computer interface software & program optional
Services Required
– Electrical Supply: 220 – 240V, 50Hz AC
See also different:
Sci-tech Beam Shear Force & Bending Moment Diagram Model MT-029 includes a beam mounted on two supports. The beam is cut at one point. At that point there is a low-friction hinge with two degrees of freedom. Two force gauges determine the [...]
