Stepper Motor Demonstrator: 3.5 Kg cm Torque Motor (with uP interface) Model PCT 051
Home » Products » Stepper Motor Demonstrator: 3.5 Kg cm Torque Motor (with uP interface) Model PCT 051
Stepper Motor Demonstrator: 3.5 Kg cm Torque Motor (with uP interface) Model PCT 051
Sci-tech Stepper Motor Demonstrator Model PCT 051 is a versatile self – contained stand alone unit useful in the study and demonstration of the principle and working of a stepper motor with various electronic controls such as electronic switching and Microprocessor based controls. Provision for direct Microprocessor interface is provided. (Microprocessor Trainer Kit is not provided – i.e., it is optional) It consists of the stepper motor and the translator. The Trainer is housed in an elegant cabinet with a well spread intelligently designed multi-colored layout on the front panel.
Item Description
Multi-colored test points are provided at various stages to observe the waveforms and voltages. It is strongly supported by a comprehensive instruction manual complete with theory, operating details and machine code program.
Technical Specifications
Motor : Bi – directional with permanent magnet rotor & bifilar
wound stator
Motor Characteristics : Self starting, low moment of inertia, instantaneous
start, stop and reversal of rotation
Rotation : 200 Steps / revolution
Torque : 3.5 kg cm2
Stepping Angle : 1.8 deg
Protection : Against forcible stalling
Mounting : Motor mounted in the cabinet with a calibrated
dial and pointer
Translator : Versatile solid state electronic switching circuit for
conversion of input pulses
Output : 1. Required pulse pattern for driving the stepper motor
using digital circuitry, analog demultiplexer & power
amplifier
2. Provision to connect Microprocessor to Driver stage
Type of Control : 1. Number of steps
2. Speed of revolution
3. Direction of rotation
DC Source : Translator : + 5V DC Regulated
Motor : + 12V DC Unregulated
Pulser : Bounceless manual pulser
Clock Generator : Variable clock frequency generator with high / low
and fine control
Controls : 1. Mains ON / OFF
2. Manual Pulser
3. Forward / Reverse rotation switch
4. High / Low variable clock for speed
5. Potentiometric Fine Control for variable clock
Test Points : Provided at various stages to observe waveforms &
voltages
Indicators : 1. Mains ON / OFF
2. Logic level indicators for monitoring the logic
status of each winding of stepper motor
Power Requirements : 230V, + 10%, 50Hz, 1phase
Standard Accessories : 1. Detailed Instruction Manual
2. Set of required number of patch cords
Specifications,
See also different:
Sci-tech Vortex Flow Meter Model FM 36 makes it possible to study different methods of volumetric and mass flow measurement, as well as to compare continuous and intermittent methods. This module includes two continuous and two intermittent me [...]