P, PI, PID Controller Simulator Trainer Model PCT 030
Home » Products » P, PI, PID Controller Simulator Trainer Model PCT 030
P, PI, PID Controller Simulator Trainer Model PCT 030
Simulated blocks
– Dead time (transportation lag),
– Integrator,
– Time constant
– Error detector and gain.
Item Description
PID Controller
(Configuration as P, PI, PD or PID)
– Prop. Band : 5% to 50% (Gain 2-20).
– Integral time : 10msec-100msec.
– Derivative time : 2-200msec.
Technical Specifications
Built-in signal sources.
– Set Value of -1V to +1V.
– Square wave of 1V p-p (min) at 40Hz.
– Triangular of 1V p-p (min) at 40Hz.
– Built-in 3 ½ digit DVM for DC measurements.
Interconnections
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
– User’s Manual with sample experimental programs.
See also different:
Sci-tech Inverted Pendulum Apparatus Model MT 115’s learning contents of the experimental unit are extended by ‘Controller Unit’ that is more complex because of its two independent drives. Conducting the experiment makes high demands on the sy [...]