Load Measurement Using Strain Gauge (Load Cell) Trainer Model PCT 022
Home » Products » Load Measurement Using Strain Gauge (Load Cell) Trainer Model PCT 022
Load Measurement Using Strain Gauge (Load Cell) Trainer Model PCT 022
Item Description
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyse signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
– User’s Manual with sample experimental programs
Technical Specifications
Transducer
– Resistive Pressure Transducer with transparent enclosure.
– Load in weights can be measured up to 3 KGs.
– Primary Excitation voltage of 12V DC
Measurement Options
– On-board Digital Panel Meter provided
– Output available on 2mm Banana sockets for Monitoring
– Weights can be verified by Physical counting of weights
On-board Features
– Provided with excitation voltage
– Weights of different denominations provided
– Onboard Instrumentation Amplifier provided
– Block Description Screen printed on glassy epoxy PCB
– Facility to Interface with PC (Optional)
– Facility to Interface with 8085/86/51kit(Optional)
See also different:
Sci-tech Axial Flow Impulse Turbine Test Apparatus Model FM 35 consists of an inlet manifold which supplies water to four jets which are equally spaced around the turbine runner. Each of the jets can be individually controlled using ball valve [...]