P, PI, PID Controller Simulator Trainer Model PCT 030
P, PI, PID Controller Simulator Trainer Model PCT 030
Simulated blocks
– Dead time (transportation lag),
– Integrator,
– Time constant
– Error detector and gain.
Item Description
PID Controller
(Configuration as P, PI, PD or PID)
– Prop. Band : 5% to 50% (Gain 2-20).
– Integral time : 10msec-100msec.
– Derivative time : 2-200msec.
Technical Specifications
Built-in signal sources.
– Set Value of -1V to +1V.
– Square wave of 1V p-p (min) at 40Hz.
– Triangular of 1V p-p (min) at 40Hz.
– Built-in 3 ½ digit DVM for DC measurements.
Interconnections
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
– User’s Manual with sample experimental programs.
See also different:
* Visualization of different condensation processes1 * Software for data acquisition
- Compact, comprehensive, sturdy design - Smooth and silent operation - Total instrumentation for complete heat balance - Concentric Tube, Shell and tube, Tubular concentric pipe, Jacketed Vessel and Plate type heat exchangers can be studied
With the performance and features of any high end torque testing system. This system is modular meaning that you can expand your torque range needs as your needs change. No need to buy a new electronic tester for every torque range. The meter [...]