Oscillators Trainers Model ETR 027 Series
Home » Products » Oscillators Trainers Model ETR 027 Series
Oscillators Trainers Model ETR 027 Series
A) HARTLY, COLPITTS, CLAPP, BLOCKING OSCILLATORS Model ETR027/1
B) CRYSTAL OSCILLATOR, ASTABLE, MONOSTABLE & BISTABLE MULTIVIBRATOR Model ETR 027/2
C) PHASE SHIFT OSCILLATOR USING FET, JFET OSCILLATOR CHARACTERISTICS OF JFET Model ETR 027/3
Size: | 40cm x 25cm x 12cm (LxWxH) |
Weight: | 5 kg |
Item Description
A) HARTLY, COLPITTS, CLAPP, BLOCKING OSCILLATORS Model ETR027/1
B) CRYSTAL OSCILLATOR, ASTABLE, MONOSTABLE & BISTABLE MULTIVIBRATOR Model ETR 027/2
C) PHASE SHIFT OSCILLATOR USING FET, JFET OSCILLATOR CHARACTERISTICS OF JFET Model ETR 027/3
Technical Specifications
A) HARTLY, COLPITTS, CLAPP, BLOCKING OSCILLATORS Model ETR027/1 Specifications
- Fixed DC supply of +5V/500mA
- One LED indicator to indicate Power input.
- On-board Circuits
- Hartley Oscillator circuit.
- Colpitt’s Oscillator circuit.
- Blocking Oscillator circuit.
- Clapp Oscillator circuit.
- All interconnections are made using 2mm banana Patch cords.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy PCB is used.
- Set of 2mm Patch cords for interconnections
B) CRYSTAL OSCILLATOR, ASTABLE, MONOSTABLE & BISTABLE MULTIVIBRATOR Model ETR 027/2 Specifications
- Fixed DC supply of +5V/500Ma
- Low Frequency Square Wave Generator
- One LED indicator to indicate Power input.
- On-board Circuits
- Astable Multivibrator circuit.
- Monostable Multivibrator circuit.
- Crystal Oscillator circuit.
- Bistable Multivibrator circuit.
- All interconnections are made using 2mm banana Patch cords.
- Bare board Tested Glass Epoxy PCB is used.
- Set of 2mm Patch cords for interconnections
C) PHASE SHIFT OSCILLATOR USING FET, JFET OSCILLATOR CHARACTERISTICS OF JFET Model ETR 027/3 Specifications
- One LED indicator to indicate Power input.
- Two Potentiometer is P1 & P2.
- On-board Circuits
- Phase Shift Oscillator circuit using FET.
- Characteristics of JFET.
- JFET Oscillator.
- Variable DC power supply: 0 to + 15 V/150mA
- Variable DC power supply: 0 to + 30 V/150mA
- All interconnections are made using 2mm banana Patch cords.
- Bare board Tested Glass Epoxy PCB is used.
- Set of 2mm Patch cords for interconnections
Model Number
ETR 027 Series
See also different:
‘Sci-tech’ Semiconductors Components Trainer Kit Model ETR 025 is Versatile trainer which is capable of performing the experiments for all the required semiconductors for students to get fully accustomed with the semiconductors and their appli [...]
Sci-tech Friction Loss in Pipes Apparatus Model GFM 31 has been designed to enable student measure loss of head in pipes due to friction at various flow velocities or Reynolds numbers. The geometry and flow parameters have been selected to ena [...]
With the performance and features of any high end torque testing system. This system is modular meaning that you can expand your torque range needs as your needs change. No need to buy a new electronic tester for every torque range. The meter [...]