ORIFICEMETER, VENTURIMETER & ROTAMETER Model FM 46
ORIFICEMETER, VENTURIMETER & ROTAMETER Model FM 46
Sci-tech Orifice-meter, Venturi-meter & Rota-meter set up Model FM 46 is self-sufficient unit to study the characteristics of Orifice meter, Venturi-meter & Rota-meter. The calibration of these meters can be study by comparing with actual flow measured in measuring tank. The orifice & Venturi is made of clear acrylic material to understand its operation phenomenon. Venturimeter & Orifice meter is mounted in such fashion that at a time we can select one of them & conduct the experiment. Rotameter is placed in supply line of pump to operating table.
Pressure tapings are provided at appropriate location for measurement of differential pressure with Mercury U tube manometer. Variable flow can be achieved for various reading set. For the particular flow we can compare the reading.
The Test set up of the Trainer can be used along with the ‘Sci-tech Hydraulic Bench FM 100. The test set up system will be supplied with orifice meter, venturimeter, rotameter, Base for these unit and all essential accessories.
| Size: | 80cm x 60cm x 80-cm (LxWxH) |
| Weight: | 25 kg |
Item Description
FEATURES
- Compact, comprehensive, sturdy design
- Fully instrumentation for experimentation of Orifice-meter, Venturi-meter & Rota-meter.
- Comprehensive teaching package as optional attachments
Sci-tech Orifice-meter, Venturi-meter & Rota-meter set up Model FM 46 is self-sufficient unit to study the characteristics of Orifice meter, Venturi-meter & Rota-meter. The calibration of these meters can be study by comparing with actual flow measured in measuring tank. The orifice & Venturi is made of clear acrylic material to understand its operation phenomenon. Venturimeter & Orifice meter is mounted in such fashion that at a time we
can select one of them & conduct the experiment. Rotameter is placed in supply line of pump to operating table.
Pressure tapings are provided at appropriate location for measurement of differential pressure with Mercury U tube manometer. Variable flow can be achieved for various reading set. For the particular flow we can compare the reading.
The Test set up of the Trainer can be used along with the Hydraulic Bench (FM 100). The
test set up system will be supplied with orifice meter, venturimeter, rotameter, Base for these unit and all essential accessories.
Technical Specifications
SYSTEM COMPONENTS
Orifice plate meter flowmeter:
- :14mm
- Measuring nozzle: 18.5mm
- Made of transparent plastic / perplex / plexi – glass.
Venturi tube:
- A=84…338mm2
- Angle at the inlet:10.50
- Angle at the outlet:40
- inlet and outlet diameter 25 mm NB
- Made of transparent plastic / perplex / plexi – glass.
Rota meter:
- Variable area with capacity 180-1800 LPH.
Measuring ranges
Pressure: 6×0…390mmWC
- Different methods of flow rate measurement
- Measuring instruments: orifice plate flow meter/measuring nozzle, venturi nozzle and rotameter
- 6 tube manometers to determine the pressure distribution in venturi nozzle, orifice plate flow meter and measuring nozzle
- measurement of the total pressure with pitot tube
- flow rate determined by base module for experiments in fluid mechanics
OPTIONAL ACCESSORIES
- ‘Sci-Cal’ Data Acquisition System for Fluid Mechanics Experiments
- Multimedia computer based training package on Flow meters
- Cut sections of valves & pumps
- Transparencies & Slides
EXPERIMENTS
- Calibration of Flow meters.
- Flow measurement using venturimeter, orifice meter, variable area flow meter like Rotameter
- Demonstration of use of different flow meter & its comparisons
- Determination of flow coefficient.
- Comparison of pressure drops across venturimeter & Orifice meter.
- Study of Coefficient of Orifice Cv, Cd, Cc
OPERATION & MAINTENANCE MANUAL
Self-explanatory operating & maintenance manual will be provided. This will include Theory, operating procedure,
standard results, and maintenance procedures.
SERVICE REQUIRED AT SITE
- Electric Supply 230V 50Hz. With proper earthing.
- Tap Water supply & drainage
Model Number
FM 46
See also different:
Sci-tech Bending of Beams: Uniaxial or Unsymmetrical Model MT 042 is used to perform experiments relating to symmetrical and unsymmetrical bending and to combined bending and torsion loading. The beam under investigation is clamped into place [...]
Sci-tech Domestic Washing Machine Trainer Kit Model ETR 060 is an ideal training equipment to teach the operation of Washing Machine. The complete Block of Washing Machine is printed on single PCB for easy understanding of function of differen [...]
