MULTI-VIBRATOR TRAINER USING 741 Model ETR 017
MULTI-VIBRATOR TRAINER USING 741 Model ETR 017
- Monostable (one-shot) or a stable (free-running) operation
- True and complemented buffered outputs
- Only one external resistor and capacitor required Monostable multivibrator
- Positive- or negative-edge triggering
- Output pulse width independent of trigger pulse duration
- Re-triggerable option for pulse-width expansion
- Long pulse width possible using small RC components with external counter provision
- Fast recovery time independent of pulse width
- Pulse-width accuracy maintained at duty cycles approaching 100%
- Astable multivibrator
- Free-running or gatable operating modes
- 50% duty cycle
- Oscillator output available V DD supply voltage 315V,
- VI input voltage 0 VDD V
- VDD = 5 V – 3.75 µs/V,
- VDD = 10 V – 0 SµsN At/A V input transition rise and fall rate VDD = 15 V – 0.08 µsN
- Temperature ambient temperature in free air – 40+85 °C
| Size: | 40cm x 30cm x 12cm (LxWxH) |
| Weight: | 5 kg |
Item Description
- Monostable (one-shot) or a stable (free-running) operation
- True and complemented buffered outputs
- Only one external resistor and capacitor required Monostable multivibrator
- Positive- or negative-edge triggering
- Output pulse width independent of trigger pulse duration
- Re-triggerable option for pulse-width expansion
- Long pulse width possible using small RC components with external counter provision
- Fast recovery time independent of pulse width
- Pulse-width accuracy maintained at duty cycles approaching 100%
- Astable multivibrator
- Free-running or gatable operating modes
- 50% duty cycle
- Oscillator output available V DD supply voltage 315V,
- VI input voltage 0 VDD V
- VDD = 5 V – 3.75 µs/V,
- VDD = 10 V – 0 SµsN At/A V input transition rise and fall rate VDD = 15 V – 0.08 µsN
- Temperature ambient temperature in free air – 40 ~ +85 °C
Technical Specifications
Specifications
- Monostable (one-shot) or a stable (free-running) operation
- True and complemented buffered outputs
- Only one external resistor and capacitor required Monostable multivibrator
- Positive- or negative-edge triggering
- Output pulse width independent of trigger pulse duration
- Re-triggerable option for pulse-width expansion
- Long pulse width possible using small RC components with external counter provision
- Fast recovery time independent of pulse width
- Pulse-width accuracy maintained at duty cycles approaching 100%
- Astable multivibrator
- Free-running or gatable operating modes
- 50% duty cycle
- Oscillator output available V DD supply voltage 315V,
- VI input voltage 0 VDD V
- VDD = 5 V – 3.75 µs/V,
- VDD = 10 V – 0 SµsN At/A V input transition rise and fall rate VDD = 15 V – 0.08 µsN
- Temperature ambient temperature in free air – 40+85 °C
- Interconnections
- All interconnections are made using 2mm banana Patch cords.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy SMOBC PCB is used.
- High impact plastic enclosures.
- Set of 2mm Patch cords for interconnections.
- User’s Manual with sample experimental programs
Model Number
ETR 017
See also different:
ORIFICEMETER, VENTURIMETER & ROTAMETER Model FM 46
Sci-tech Orifice-meter, Venturi-meter & Rota-meter set up Model FM 46 is self-sufficient unit to study the characteristics of Orifice meter, Venturi-meter & Rota-meter. The calibration of these meters can be study by comparing with act [...]
