Deflection of Beams & Cantilevers Apparatus Model MT 074
Home » Products » Deflection of Beams & Cantilevers Apparatus Model MT 074
Deflection of Beams & Cantilevers Apparatus Model MT 074
Sci-tech Deflection of Beams & Cantilevers Apparatus Model MT 074 consists of a backboard that fixes to the Structures Test Frame. Test beams fit onto the backboard using a rigid clamp and knife-edge supports. Students apply loads at any position using hangers holding various masses. Mounted on a trammel, a digital deflection indicator traverses the beam. The indicator measures beam deflection. Scales on the backboard show the position of the indicator, the loads and supports.
Size: | 120cm x 50cm x 80cm (LxWxH) |
Weight: | 15 kg |
Item Description
Features
- High-quality structures teaching module for students of mechanical, civil and structural engineering
- Allows safe and practical experiments into deflections of beams and cantilevers
- Realistic and verifiable experiment results
- Optional Structures Software package for extra ‘virtual’ experiments that simulate and confirm the results from your hardware and allow extended experiments
- Optional ‘Sci-Cal’ Software package for automatic data acquisition and virtual experiments
Sci-tech Deflection of Beams & Cantilevers Apparatus Model MT 074 consists of a backboard that fixes to the Structures Test Frame. Test beams fit onto the backboard using a rigid clamp and knife-edge supports. Students apply loads at any position using hangers holding various masses. Mounted on a trammel, a digital deflection indicator traverses the beam. The indicator measures beam deflection. Scales on the backboard show the position of the indicator, the loads and supports.
The ‘Instruction Manual’ provides details of the equipment including sample experiment results. The student guide describes how to use the equipment and gives experiment procedures.
For extra ‘virtual’ experiments, Sci-tech can supply the optional Software, for use on a suitable computer. The virtual experiments simulate the tests you can perform with the hardware. They also extend the choice of tests beyond that available using only the hardware, for example: higher loads, uniform loads or different test specimens. This extends the student’s learning experience.
For automatic data acquisition of your experiment results, Sci-tech can supply the optional Automatic Data Acquisition Unit.
Technical Specifications
Specifications
- 10 knife-edges with weight hangers and 150 x 10 g masses can set up to 500mm span length of test beam
- Test beams of approximately dimensions 25mm x 5mm x 1200mm:
- 1 x aluminum
- 1 x steel
- 1 x brass
- Supplied with set of 1N, 2N and 50N slotted weight for experimental purpose.
- Total weight: Approximately 12 to 20 kg
- External frame equipped with approximately 1000mm stand
- External frame maximum load @ 5 kN
- External frame dimension: 1000mm x 1200mm
Deflection measurement:
Digital deflection indicators with approximately 13mm range and 0.01mm resolution
Accessories:
Rule and Vernier
Optional:
‘Sci-Cal’ Automatic Data Acquisition Unit for automatic data acquisition and virtual experiments
Experiments
Examination of:
- Beam deflections
- General bending formulae
- Beam end rotations
- Elastic moduli (Young’s modulus) for various materials
Typical conditions are:
- Cantilever
- Propped cantilever
- Encastre beam
- Simply supported beam
Operating Conditions
Operating environment:
Laboratory
Storage temperature range:
–25oC to +55oC (when packed for transport)
Operating temperature range:
+5oC to +40oC
Operating relative humidity range:
80% at temperatures < 31oC decreasing linearly to 50% at 40o C
Model Number
MT 074
See also different:
Sci-tech Free Vibration Apparatus Model MT 054 has been designed to perform demonstrations and experiments which provide an understanding of the free vvibrations of a simple spring-mass-damper system. Demonstrations may be carried out to illus [...]