Deflection of Beam Apparatus Model 028
Deflection of Beam Apparatus Model 028
Sci-tech Deflection of Beam Apparatus Model MT 028 has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:
– Relation between the deflections and the applied loads.
– Effect of the length and the cross section on the beam behavior.
Ex: deflection load ratio.
MT 028 unit consists of an aluminum and stainless-steel structure to carry out experiment with metal beams up to a length of 1 m. Three beams with different cross section are supplied. The structure makes it easy to study cantilevers holding the beam by one end, or beams simply supported on two points. The unit gives us the possibility of modifying the position of the supporting and holding points. It has a graduated ruler fixed on the structure that allows to obtain measures easily in different points of the beam. The weights will be hung from hooks, in order to apply the load on any point in the beam.
| Size: | 102cm x 40cm x 60cm (LxWxH) |
| Weight: | 20 kg |
Item Description
Sci-tech Deflection of Beam Apparatus Model MT 028 has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:
– Relation between the deflections and the applied loads.
– Effect of the length and the cross section on the beam behavior.
Ex: deflection load ratio.
MT 028 unit consists of an aluminum and stainless-steel structure to carry out experiment with metal beams up to a length of 1 m. Three beams with different cross section are supplied. The structure makes it easy to study cantilevers holding the beam by one end, or beams simply supported on two points. The unit gives us the possibility of modifying the position of the supporting and holding points. It has a graduated ruler fixed on the structure that allows to obtain measures easily in different points of the beam. The weights will be hung from hooks, in order to apply the load on any point in the beam.
Technical Specifications
Specifications
- Bench-top unit.
- Structure of anodized aluminum and stainless steel.
- Metallic guide with a graduated ruler for positioning the different supports.
- 2 Removable stainless-steel supports.
- 1 Removable stainless steel cantilever support.
- Dial gauge, 0-25 mm range and 0.01 accuracy.
- It allows experimentation with beams up to 1000 mm length for their study.
- Three test rectangular beams (made of stainless steel) with different cross sections and 1 m. of length are supplied.
- The unit allows test as:
- cantilever beam.
- beam fixed at one end and simply supported at the other end.
- simply supported beam.
- Adjustable legs for balancing the unit.
- In order to carry out some of the practices with MFV unit, 2 set of weights “C type” are required. (See required accessories).
- Manuals: The Trainer is supplied with the following manuals: Required services, Assembly and Installation, Starting-up, Security, Maintenance and Practices manual.
Accessories
- 2 set of weights “C type” (set C).
- Each “C type” set is composed of:
1 support hook.
6 weights of 100 gr.
2 weights of 200 gr.
2 weights of 500 gr.
1 weight of 1000 gr.
Model Number
MT 028
See also different:
- Compact, comprehensive, sturdy design - Smooth and silent operation - Total instrumentation for complete heat balance - One or many of tubular heat exchangers can be studied
