Material Testing Apparatus: 50kN Model MT 157
Material Testing Apparatus: 50kN Model MT 157
Sci-tech Material Testing Apparatus 50kN Model MT 157, in conjunction with the accessories, offers experiments from destructive materials testing.
The clean layout and simple operation mean the experimental sequence can be observed in all details and phases. The power of the trainer allows tests to be performed on an industrial scale. Material specification data and laws can be verified using self-determined measured values.
The vertical, hydraulically operated trainer with direct force generation can produce both tensile and compressive forces. The height of the lower cross-member can be adjusted for coarse adjustment. Cylindrical receptacles on the cross-members allow for easy exchange of accessories.
The extensive accessories provide tensile and compression tests, Brinell hardness tests, bending, shear and cupping tests. Plate and coil springs can also be tested. The test load and elongation of the specimen are measured by sensors and are displayed.
| Size: | 110cm x 90cm x 240cm (LxWxH) |
| Weight: | 385 kg |
Item Description
Features
- Hydraulically operated trainer, based on industrial standards
- Direct generation of tensile and compressive forces
- Extensive accessories for experiments from destructive materials testing
A classic discipline of materials testing is the destructive testing method, in which specimens are mechanically tested to failure. The materials test provides data for hardness, rigidity and strength in a reproducible and precisely quantified manner.
Sci-tech Material Testing Apparatus 50kN Model MT 157, in conjunction with the accessories, offers experiments from destructive materials testing.
The clean layout and simple operation mean the experimental sequence can be observed in all details and phases. The power of the trainer allows tests to be performed on an industrial scale. Material specification data and laws can be verified using self-determined measured values.
The vertical, hydraulically operated trainer with direct force generation can produce both tensile and compressive forces. The height of the lower cross-member can be adjusted for coarse adjustment. Cylindrical receptacles on the cross-members allow for easy exchange of accessories.
The extensive accessories provide tensile and compression tests, Brinell hardness tests, bending, shear and cupping tests. Plate and coil springs can also be tested. The test load and elongation of the specimen are measured by sensors and are displayed.
Using the Sci-Cal system for data acquisition, the measured values for force and displacement can be transferred to a PC where they can be analysed with the software.
Technical Specifications
Specifications
- Hydraulically operated trainer for materials testing, based on industrial standards
- Generation of tensile and compressive forces
- Adjustable test load and travel velocity
- Generation of test load via gear pump and double-acting hydraulic cylinder
- Force measurement via a strain-gauge full bridge with acoustic overload signal, max. overload 150%
- Displacement measurement via linear potentiometer
- LED displays for force and displacement with tare and maximum-value storage
- Sci-Cal software for data acquisition via USB under Windows 10
- Wide range of accessories available.
Technical Specifications
Operating area, WxH: 300x925mm
Hydraulic generation of the test load
Test load: 0…50kN
Max. system pressure: 175bar
Max. piston stroke: 150mm
Traverse velocity: 0…425mm/min
Gear pump
Max. flow rate: 1cm3/revolution
Power consumption: 0,55kW
Measuring ranges
force: 0…50kN
displacement: 0…150mm
Dimensions: 1100Lx900Wx2400Hmm
Weight: @385kgs
Experiment Possibilities
- Tensile test
- Compression test
- Brinell hardness test
- Bending test
- Shear test
- Cupping test
- Spring testing
Accessories required for experiments, optionally available
Optional Accessories
Tensile test
Clamping device for tensile specimens, round and flat
Set of 10 tensile specimens F10x50, St
or
Clamping device for tensile specimens, threaded end
Set of 10 tensile specimens B10x50, St
or
Clamping device for tensile specimens, dumbbell-shaped
Set of 10 tensile specimens, dumbbell-shaped, St
Compression test
Compression plates for compression tests
Set of compression specimens, 4x plastic, 1x wood
Brinell hardness test
Experimental setup for Brinell hardness test
Set of 4 hardness specimens, Al, Cu, St, CuZn
Set of 4 hardness specimens, Al
Set of 4 hardness specimens, Cu
Set of 4 hardness specimens, St
Set of 4 hardness specimens, CuZn
Measuring magnifier for Brinell hardness test
Bending test
Bending test device
Set of 25 bending specimens, St
Cupping test
Device for cupping tests
Set of 5 cupping specimens, Al
Set of 5 cupping specimens, Cu
Set of 5 cupping specimens, St
Set of 5 cupping specimens, CuZn
Shear test
Device for shear tests, double-shear
Set of 5 shear specimens, Cu
Spring test
Experimental setup for spring test, helical spring
Experimental setup for spring test, disk spring
Model Number
MT 157
See also different:
Features Aesthetically designed Aluminum Profile Structure CE marked branded Components/ Meters are used. ABS plastic enclosed Panel Board with mimic diagram All input & output are terminated in 4mm shrouded connector, 4mm banana cables se [...]
