Ventilation Systems Trainer Model RAC 030
Ventilation Systems Trainer Model RAC 030
Sci-tech Ventilation Systems Trainer Model RAC 030 is used in building services engineering to achieve the required air change rates in the individual rooms. The ventilation air can also be heated or cooled by heat exchangers. A ventilation system is a preliminary stage for an air conditioning system in which the air can also behumidified or dehumidified.
Item Description
The system is assembled from standard industrial components. The plexi-glas windows and exposed ductwork ensure that normally hidden components can be seen: inspection covers and fire dampers, filters, heaters / coolers, Louvre damper, etc. The original function is fully retained. The system emphasizes ventilation rather than air conditioning. Depending on the operating mode, heating or cooling, a supply of hot or cold water is required in the laboratory. The system requires a three-phase mains supply. With the additional module HL 722, a room temperature control system can be realized with the ventilation system.
Technical Specifications
[1]Ventilation system on trolley on castors, l x w x h 2100x880x2050mm, 180kg
[2]Climatic unit with filter, heat exchanger and fan
[3]All components from air conditioning, some arranged under plexi-glas covers in the ventilation duct
[4]Duct with pressure measurement glands
[5]Pressure measurement with inclined tube manometer
[6]Current measurement using ammeter
[7] Cold and hot water connection necessary for operation of the system with cooler/heater
[8]400V, 50Hz, 3 phases
Technical Data
Climatic unit:
– fan: max. airflow rate: 2500m³/h, speed:1600rpm, drive motor: 750W
– air-to-water heat exchanger: capacity: 7.6kW
Components: weather protection grille, louvre damper, inspection cover, 2x sound absorbing
panel, ventilation grille with flow control, fire damper, 2x ceiling air outlet
Measuring ranges:
– Pressure: 0…750Pa
– current: 0…6A
Dimensions
– l x w x h : 2100 x 880 x 2050 mm
– Weight : approx. 180 kg
Supplies required:
– 400V, 50Hz, 3 phases
– Hot and cold water supply Specifications
See also different:
This expertly-sectioned example of a common fractional-horsepower rotary-type refrigeration compressor, facilitates and supports practical training in AC compressor design, operating principles, and maintenance. Both the steel shell and the co [...]
Identifying electrical faults in refrigeration systems requires comprehensive knowledge This knowledge includes the design and operation of the individual electrical components as well as the reading of circuit diagrams. Sci-tech Electrical Fa [...]
