INTEGRATOR, DIFFRENTIATOR, SUMMING & DIFFERENCE AMPLIFIER USING 741 TRAINER Model ETR 020
INTEGRATOR, DIFFRENTIATOR, SUMMING & DIFFERENCE AMPLIFIER USING 741 TRAINER Model ETR 020
Specifications OUTPUT Waveform – Square Frequency and Amplitude Adjustment is provided using Potentiometers. One LED indicator to indicate Power Input. On-board Circuits Adder. Subtractor Integrator Differentiator. Fixed DC power supply: + 12 V/ 200mA Fixed DC power supply: + 5 V/ 200mA Variable DC power supply: 0 to 15 V/150mA Supply connections to OP Amp (± 12 V) Internally provided to the circuit.
- Interconnections
- All interconnections are made using 2mm banana Patch cords.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy SMOBC PCB is used.
- High impact plastic enclosures.
- Set of 2mm Patch cords for interconnections.
- User’s Manual with sample experimental programs
| Size: | 40cm x 30cm x 12cm (LxWxH) |
| Weight: | 5 kg |
Item Description
OUTPUT Waveform – Square
Frequency and Amplitude Adjustment is provided using Potentiometers.
One LED indicator to indicate Power Input.
On-board Circuits
Adder.
Subtractor
Integrator
Differentiator.
Fixed DC power supply: + 12 V/ 200mA
Fixed DC power supply: + 5 V/ 200mA
Variable DC power supply: 0 to 15 V/150mA
Supply connections to OP Amp (± 12 V) Internally provided to the circuit.
- Interconnections
- All interconnections are made using 2mm banana Patch cords.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy SMOBC PCB is used.
- High impact plastic enclosures.
- Set of 2mm Patch cords for interconnections.
- User’s Manual with sample experimental programs
Technical Specifications
Specifications
OUTPUT Waveform – Square
Frequency and Amplitude Adjustment is provided using Potentiometers.
One LED indicator to indicate Power Input.
On-board Circuits
Adder.
Subtractor
Integrator
Differentiator.
Fixed DC power supply: + 12 V/ 200mA
Fixed DC power supply: + 5 V/ 200mA
Variable DC power supply: 0 to 15 V/150mA
Supply connections to OP Amp (± 12 V) Internally provided to the circuit.
- Interconnections
- All interconnections are made using 2mm banana Patch cords.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy SMOBC PCB is used.
- High impact plastic enclosures.
- Set of 2mm Patch cords for interconnections.
- User’s Manual with sample experimental programs
Model Number
ETR 020
See also different:
Sci-tech Thin Cylinder Apparatus Model MT 055 been developed to enable the student to verify the various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an o [...]
