Filters Trainers Models ETR 016 Series
Filters Trainers Models ETR 016 Series
Trainer for Passive Filter Model ETR 016_01
PASSIVE FILTER-II (RC 1st Order High/ Low Pass, RC 2nd Order High/ Low Pass, Notch)
PASSIVE FILTER-III (LC M derived/ Constant K type filters) (RC High Pass, RC Low Pass, LC High Pass, LC Low Pass)
Trainer for Active Filter Model ETR 016_02: ACTIVE FILTERS-I (Low Pass, High Pass, Unity Gain Phase Shifting)
Trainer for Butterworth, Bessels & Chebshew Filters Model ETR 016_03
| Size: | 40cm x 30cm x 12cm (LxWxH) |
| Weight: | 5 kg |
Item Description
Trainer for Passive Filter Model ETR 016_01
PASSIVE FILTER-II (RC 1st Order High/ Low Pass, RC 2nd Order High/ Low Pass, Notch)
PASSIVE FILTER-III (LC M derived/ Constant K type filters) (RC High Pass, RC Low Pass, LC High Pass, LC Low Pass)
Trainer for Active Filter Model ETR 016_02: ACTIVE FILTERS-I (Low Pass, High Pass, Unity Gain Phase Shifting)
Trainer for Butterworth, Bessels & Chebshew Filters Model ETR 016_03
Technical Specifications
Trainer for Passive Filter Model ETR 016_01 PASSIVE FILTER-II (RC 1st Order High/ Low Pass, RC 2nd Order High/ Low Pass, Notch) PASSIVE FILTER-III (LC M derived/ Constant K type filters) (RC High Pass, RC Low Pass, LC High Pass, LC Low Pass) Specifications
- Output Waveform: Sine & Square
- Frequency & Amplitude adjustment provided using Potentiometer
- LED indicator to indicate Power input
- On-board circuits:
– Inductor bank – Resistor/Capacitor bank Trainer for Active Filter Model ETR 016_02 ACTIVE FILTERS-I (Low Pass, High Pass, Unity Gain Phase Shifting)
- Output Waveform: Sine
- Frequency & Amplitude adjustment provided using Potentiometer
- LED indicator to indicate Power input
- On-board circuits:
- Inverting Low Pass Filter
- High Pass Filter
- Non-inverting Low Pass Filter
- Unity Gain Phase Shift
- Supply connections to Op-amp (+/-12V) internally provided to the circuit
- Bare board Tested Glass Epoxy PCB is used.
Trainer for Butterworth, Bessels & Chebshew Filters Model ETR 016_03 Butterworth, Bessels, Chebshew Filters
- Output Waveform: Sine
- Frequency & Amplitude adjustment provided using Potentiometer
- One reset switch
- LED indicator to indicate Power input
- On-board circuits:
- Filter Type A
- Filter Type B
- Supply connections to Op-amp (+/-12V) internally provided to the circuit
- All ICs mounted in IC sockets
- Bare board Tested Glass Epoxy PCB is used.
– Capacitor bank – Noise Filter
- Fixed DC power supply +12V
- All inter-connections made using 2mm patch cords
Model Number
ETR 016
See also different:
MIC 005C is a single board Universal Embedded Kit based on PIC (Microchip 16F877A /18F452) Microcontroller for any Embedded applications.
Sci-tech PC Operated Temperature Control System Trainer Model PCT 106 is designed to demonstrate various aspects of control engineering using a temperature controlled system. Electrical oven or hot water bath is used as process. Temperature of [...]
