Aerodynamic Trainer Model AT 010
Aerodynamic Trainer Model AT 010
Sci-tech Aerodynamics Trainer Model AT 010 offers – along with its accessories – typical experiments from the field of flow around, incident flow and flow through models, as well as further experiments in the field of steady incompressible flow. The trainer includes a radial fan, which can be used to generate flow velocities up to 40m/s. The speed is infinitely adjustable by using a frequency converter. A stabilization tank with flow straightener ensures a consistent, low-turbulence and reproducible flow in the measuring section. A carefully shaped nozzle provides a largely homogeneous velocity distribution of the air flow. The accessory is attached using quick release fasteners and can be interchanged quickly and easily. Measuring points along the measuring section allow pressure and velocity measurements to be taken. The tube manometers are used to show the pressures clearly.
| Size: | 60cm x 55cm x 125cm (LxWxH) |
| Weight: | 85 kg |
Item Description
Features
* Flow velocities up to 40m/s possible1
* Homogeneous flow through the flow straightener and special nozzle contour1
* Matching accessories offer a wide range of experiments
* Optional ‘Sci-Cal’ Computer Control Software & Interface
Aerodynamics describes the behavior of bodies during flow around or through bodies with a compressible fluid. The purpose of experiments in aerodynamics is familiarization with and optimization of drag and the flow field around a body. This knowledge has a significant influence on the development of means of transport (vehicles, ships, aircraft) and in architecture (skyscrapers, towers and bridges).
Sci-tech Aerodynamics Trainer Model AT 010 offers – along with its accessories – typical experiments from the field of flow around, incident flow and flow through models, as well as further experiments in the field of steady incompressible flow.
The trainer includes a radial fan, which can be used to generate flow velocities up to 40m/s. The speed is infinitely adjustable by using a frequency converter. A stabilization tank with flow straightener ensures a consistent, low-turbulence and reproducible flow in the measuring section. A carefully shaped nozzle provides a largely homogeneous velocity distribution of the air flow. The accessory is attached using quick release fasteners and can be interchanged quickly and easily. Measuring points along the measuring section allow pressure and velocity measurements to be taken. The tube manometers are used to show the pressures clearly.
The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.
Technical Specifications
Specifications
[1] Aerodynamics experiments in the fields of flow around, incident flow and flow through models, as well as further experiments in the field of steady incompressible flow.
[2] Vertical measuring section with flow straightener and nozzle
[3] Radial fan infinitely variable via frequency converter
[4] Thermometer for measuring air temperature
[5] Accessory securely attached to HM 225 with quick release fasteners
[6] 16 tube manometers for displaying pressures
[7] Accessories for the field of flow around bodies: Boundary Layers Drag Forces Coanda Effect Visualization of Streamlines
[8] Accessories for the field of steady incompressible flow: Bernoulli’s principle Flow in a pipe elbow Free Jets
Technical Specifications
Radial fan
– power consumption: 0,37kW
– max. flow rate: 15m³/min
– nozzle exit cross-section: 50x100mm
– max. flow velocity at the nozzle exit: 40m/s
Optional
Optional
‘Sci-Cal’ Computer Control Software & Interface
‘Sci-Cal’ software & hardware has been designed for use with more than 600 ‘Sci-tech’ trainers. ‘Sci-Cal’ comes in a module that can be fitted or mounted on the Sci-tech trainers very easily.
‘Sci-Cal’ box has 11 inches front HMI interactive panel, inside are i3 processor computer with it’s own hard drive & software processor with 16 to 32 analog and 16 to 32 digital signal data-loggers. The ‘LabVIEW’ processes the input signal with in-built data and formulae to tabulate results for the Sci-tech trainers.
‘Sci-Cal’ box has HDMI output for connection to a projector or an electronic whiteboard or a monitor.
‘Sci-Cal’ box has input ports for inputs from the Sci-tech trainer sensors.
‘Sci-Cal’ eliminates requirement of external computer.
Experiments
Together with appropriate accessories: experiments from the field of flow around bodies
– velocity measurement of flows with Pitot tube
– boundary layer analysis on a flat plate with flow along the plate
– drag of bodies
– demonstration of the Coanda effect
– visualization of streamlines
Together with appropriate accessories: experiments from the field of steady incompressible flow
– velocity measurement of flows with Pitot tube and
Pitot static tube
– free jets
– flow in a pipe elbow
– proof of Bernoulli’s principle
Scope of Delivery
1 trainer
1 set of instructional material
Optional Attachments:
1. Boundary Layers Model AT 010BL
2. Bernoulli’s Principle Model AT 010BP
3. Drag Forces Model AT 010DG
4. Flow in a Pipe Bend Model AT010FPB
5. Coanda Effect Model AT 010CE
6. Free Jet Model AT 010FJ
7. Visualization of Streamlines Model AT 010VS
Model Number
AT 003
See also different:
This Hydro-electric power generator is composed of a turbine with transparent cover connected to a small motor to generate electricity.
Sci-tech Differential Gear Assembly Model AM282 is an actual Cut Section.
With the performance and features of any high end torque testing system. This system is modular meaning that you can expand your torque range needs as your needs change. No need to buy a new electronic tester for every torque range. The meter [...]