Home » Products » 8085 ADVANCE MICROPROCESSOR TRAINING KIT (LCD version) Model M85-07

8085 ADVANCE MICROPROCESSOR TRAINING KIT (LCD version) Model M85-07

8K bytes of RAM using 6264 with Battery Backup using NICD Battery.
On-board one memory expansion up to 56KB.
Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector.
48 I/O lines provided using 8255 brought out at 26 Pins FRC Connector to interface with IC-XX Series.
RS-232C interface through SID/SOD lines brought out on a 9-Pin D- Type connector

Two mode of commands:
ASCII Key pad Mode
Serial Mode
20×2 Alphanumeric LCD Display with Backlight.
101 ASCII Keyboard interface using 89C2051 operating @ 12MHz.
On-board EPROM Programmer for 27 series viz. 2716, 2732, 2764, 27128, 27256, 27512.
On-board Printer Interface provided on 25 pin D-Type Connector to interface with DOT MATRIX Printer.
On-board Interrupt Controller using 8259 terminated on 26 pin FRC Connector.
On-board USART using 8251 terminated on a 9 pin D-Type Connector.
On-board 1 Channel SPDT Relay terminated on a 10 pin FRC Connector.
On-board 1 Channel Opto Coupler using MCT2E terminated on 10 pin FRC Connector.
On-board 8 Channel 8 bit ADC using ADC0809 terminated on 26 pin FRC Connector.
On-board 1 Channel 8 bit D/A using DAC0800 terminated on 26pin FRC Connector.
On-board Speaker Interface brought out on 2mm banana connector.
Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move, Insert Data, Delete Data can be used through ASCII keyboard or PC serial mode.
On Board Single Line Assembler / Disassembler
Facility for Downloading/Uploading files from/to PC.
In-Built Power Supply of +5V/2A, ±12V/250mA
Attractive Wooden enclosures of Light weight Australian Pine Wood.
User’s Manual with sample programs
All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series.
All ICS are mounted on IC Sockets.
Bare board Tested Glass Epoxy SMOBC PCB is used.

See also different: