Gas Absorption Unit Model PCT 031
Gas Absorption Unit Model PCT 031
Sci-tech Gas Absorption Unit Model PCT 031 is designed to demonstrate & analyze principle of gas absorption by means of liquids (solvent absorption). The unit comes complete with a packed column, a bottom cooler, a feed vessel and a circulation pump. The unit allows students to run experiments on gas absorption, e.g. the absorption of carbon dioxide into water. Sampling points are provided for analysis purposes. Other gas absorption processes that are used in the chemical industry such as the absorption of sulphur dioxide, hydrogen sulphide, ammonia, hydrogen chloride,nitric oxides, etc. can be studied but care must be exercised to ensure proper safety and disposal procedures.
Detailed Operation & Maintenance Manual is provided along with the trainer.
Item Description
Experiment Capabilities
– Study of the basic principles of the absorption of a gas into a liquid using a packed column
– Demonstration of methods of gas and liquid quantitative analysis
– Production of mass balances for a packed absorption column
– Method of transferring units, including calculation of NTU and HTU
– Determination of the Mass Transfer Coefficient
– Study of the hydrodynamic characteristics of a packed column
– Determination of loading and flooding points
Technical Specifications
The unit comprises the following main items:
– Absorption Column
– Floor mounted packed column gas absorption unit using a 75mm diameter, 1.4m long clear acrylic column. The column contains 7 litres of 10 x 10mm glass Raschig rings and is
mounted in a steel frame.
– Pressure sensing and gas sampling points are sited at the top, centre and base of the column.
– Two manometers are included to measure pressure.
– A Hempl type gas analysis apparatus is included.
– Three variable area flow meters are included to measure the flow of gas, air and liquid.
– A rotary compressor is used to pump air into the column.
– Water (solvent) is circulated using a centrifugal pump, using a 50 litre capacity feed tank.
– A comprehensive instruction manual is supplied which details the necessary installation, commissioning and maintenance procedures
See also different:
Sci-tech Sedimentation Transport Demonstration Channel Model FM 75 allows demonstration of the full range of bedforms that arise in a mobile bed as the flow and/or slope are increased. The channel can be used to perform most of the experiments [...]
The Sci-tech Wind Power Plant Model AT 005 generating set has nine characteristics as follows: Low start-up wind speed is needed. High system efficiency. Little flutter in operation. Lower noise. Small and nice looking. Easy installation and [...]
Sci-tech Automotive Bus Air-Conditioning Trainer Model AM 003 is designed to enhance student study of bus air conditioner trainer. The trainer is fabricated in aluminum profile rack. Mounted with diesel engine couple to open type reciprocal ty [...]