Technical Specifications

Specifications
 Completely self – contained stand – alone training system

 Demonstrates the principle & working of a DC servomotor
 Determine the speed torque characteristics of an DC servomotor
 Specially designed DC servo – motor with required power supply of 60 V DC, 125W
 Operational travel distance for the cart is between 650 mm and 655 mm.
 Incremental type encoder with 4000 counts resolution for motor
 incremental type encoder with 1800 counts resolution for travel cart
 Toggle actuated friction brake with Felt type friction brake pad material
 Removable cylindrical inertia load
 Motor-belt driven travel cart guided by two rods
 A Rope Brake Pulley Loading Arrangement is provided for Loading of the DC Servo-Motor. The arrangement consists of a pulley connected to the shaft of the DC Servomotor, spring balance and the rope coupled across the pulley
 A Non – contact type tachometer arrangement using an Opto Coupler is provided along with a Microcontroller based Digital RPM meter for accurate RPM measurement of the DC Servomotor Control algorithm can be programmed using Matlab/Simulink software or Labview software. The Controller has 32-bit ARM-based microcontroller that coupled to a power amplifier to gain and trigger the data to from and to the hardware.
 Power amplifier is an IGBT bridge type with maximum voltage is no more than 50 VDC and the maximum current shall less than 10 A.
 The servo controller also has two 12-bits ADCs, minimum FOUR (4) +/- 10 VDC analgue outputs, built in 48 VDC/6.7 A power supply and 12-bits DAC.
 Plotting the characteristics of Speed v/s Torque for the DC Servo Motor

 Multi – coloured test points are provided at various stages to observe the voltages and waveforms
 The Control & Display Module / Unit is housed in an elegant cabinet with a well spread
intelligently designed multi-coloured layout on the front panel
 The DC Servo Motor with Loading arrangement Module / Unit along with necessary Wires / connector is separately provided
 Strongly supported by a comprehensive instruction manual complete with theory and operating details.
 230 V AC, 50 Hz, 1 phase mains operated.