Bio Gas Plant Model PT 010
Bio Gas Plant Model PT 010
In a biogas plant, microorganisms biologically depredate the organic starting substances (substrate) under exclusion of light and oxygen. The product of this anaerobic degradation is a gas mixture, which primarily consists of methane. This gas mixture is called biogas.
Features
– Two-stage biogas plant
– Extensive biogas analysis
– System control using a PLC, touch screen for display and operation
Item Description
The experimental Sci-tech Biogas Plant Model PT 010 serves to demonstrate the generation of biogas in a practical manner. The substrate is a suspension of shredded organic solids. It is hydrolyzed and acidified in the first stirred tank reactor. Here, anaerobic microorganisms convert the long-chain organic substances into short-chain organic substances. The biogas forms in the second stirred tank reactor in the last step of the anaerobic degradation. It contains mainly methane and carbon dioxide. This two-stage method enables the ambient conditions to be adjusted and optimized in both reactors separately. The digestate is collected in a separate tank.
Temperature and pH value are controlled in both reactors. The resulting biogas is dried in a column. The column is filled with silica gel. Subsequently, the flow rate, humidity, methane content, carbon dioxide content and temperature of the biogas are measured. The system is controlled by means of a PLC which is operated via a touch screen. The measured values can be transmitted to a PC via USB and analyzed with the software.
The experimental plant enables both a continuous and a discontinuous (batch) operation mode. Anaerobic biomass from a biogas plant is required for the experiments. E.g. potatoes or maize can be used to produce the substrate. An inert gas (e.g. carbon dioxide) is required to flush the experimental plant.
1. Two-stage biogas plant (continuous or discontinuous operation possible)
2. 2 stirred tank reactors made of stainless steel with capacitive level sensors
3. Separate supply unit with substrate tank and feed pump
4. Control of temperature and pH value in the reactors
5. 2 metering pumps for acid and caustic
6. Heating water circuit with tank, heater, temperature controller and pump
7. Biogas is dried with silica gel
8. Biogas analysis: flow rate, methane content, carbon dioxide content, humidity and temperature
9. Control of the experimental plant using a PLC, operated by touch screen
10. Optional Software for data acquisition via USB under Windows 7, 8.1, 10
Technical Specifications
Tanks made of stainless steel
– Reactor (stage 1): approx. 20L
– Reactor (stage 2): approx. 70L
– Substrate tank: approx. 25L
– Digestate tank: approx. 25L
Pumps
– 3 peristaltic pumps: each max. 25L/h
– 2 metering pumps: each max. 2,1L/h
– Heating water pump: max. 480L/h
Stirring machines
– Substrate tank: max. 200min-1
– Reactors: each max. 120min-1
Measuring ranges
– Methane content: 0…100%,
– Carbon dioxide content: 0…100%
– Flow rate (biogas): 0…30NL/h
– pH value: 2x 1…14
– Humidity: 0…100%
– Temperature (reactors and biogas): 3x 0…100°C
See also different:
With Sci-tech Domestic Gas Supply Trainer Model PT 003, the experiments are performed with air. A compressed air connection with reservoir and pressure reducing valve are included on the panel.
