Steam Motor & Energy Conversion Test Kit Model BSG 009
Steam Motor & Energy Conversion Test Kit Model BSG 009
Sci-tech Steam Motor & Energy Conversion Test Kit Model BSG 009 is a mobile laboratory-scale steam plant for experiments in thermodynamic principles.
A mobile frame contains all the parts of the test set. An electric pump draws from a reservoir (included) to deliver water to an electrically-heated boiler. The boiler includes a safety valve, water level gauge and ‘blow-down cock’. The boiler produces steam to turn a two-cylinder steam motor. The used steam from the motor outlet passes through a mains water-cooled condenser, then down to a waste tank or to a measuring vessel (supplied). The equipment includes all instruments needed for the experiments. These include a band-brake dynamometer with a digital torque and speed display, to measure and display motor speed, torque and power. Thermocouples connect to a digital temperature display to measure and display temperatures at key points in the test set. A throttling calorimeter allows students to measure the dryness fraction of the steam.
Two mechanical gauges show the boiler and engine inlet pressures. A meter shows the electrical power supplied to the heaters in the boiler.
| Size: | 70cm x 60cm x 95cm (LxWxH) |
| Weight: | 95 kg |
Item Description
Sci-tech Steam Motor & Energy Conversion Test Kit Model BSG 009 is a mobile laboratory-scale steam plant for experiments in thermodynamic principles.
A mobile frame contains all the parts of the test set. An electric pump draws from a reservoir (included) to deliver water to an electrically-heated boiler. The boiler includes a safety valve, water level gauge and ‘blow-down cock’. The boiler produces steam to turn a two-cylinder steam motor. The used steam from the motor outlet passes through a mains water-cooled condenser, then down to a waste tank or to a measuring vessel (supplied). The equipment includes all instruments needed for the experiments. These include a band-brake dynamometer with a digital torque and speed display, to measure and display motor speed, torque and power. Thermocouples connect to a digital temperature display to measure and display temperatures at key points in the test set. A throttling calorimeter allows students to measure the dryness fraction of the steam.
Two mechanical gauges show the boiler and engine inlet pressures. A meter shows the electrical power supplied to the heaters in the boiler.
Detailed Operation & Maintenance Manual is provided along with the trainer.
Technical Specifications
Technical Specifications
- Motor power: approximately 90 W at 2000 rev.min–1
- Boiler: Electrically heated by two independently-switched Immersion heaters. Maximum experiment pressure approximately 350 kPa (set by 400 kPa pressure relief safety valve)
- Throttling calorimeter and thermocouple to measure the dryness fraction of the steam
- Dynamometer and display unit for motor speed and power measurement
- Pressure gauges for boiler and engine (motor) inlet pressures.
- Thermocouples and display for steam and cooling water temperatures
- Power meter for heater power input.
- Calibrated vessel with stopwatch and thermometer for condensate (steam flow) measurement.
Water (solvent) is circulated using a centrifugal pump, using a 50 litre capacity feed tank. - A comprehensive instruction manual is supplied which details the necessary installation, commissioning and maintenance procedures.
- Optional: Sci-CalR Computer Control Software & Interface
Sci-CalR software & hardware has been designed for use with more than 600 ‘Sci-tech’ trainers. Sci-CalR comes in a module that can be fitted or mounted on the Sci-tech trainers very easily.
Sci-CalR box has 11 inches front HMI interactive panel, inside are i3 processor computer with it’s own hard drive & software processor with 16 to 32 analog and 16 to 32 digital signal data-loggers. The ‘LabVIEW’ processes the input signal with in-built data and formulae to tabulate results for the Sci-tech trainers.
Sci-CalR box has HDMI output for connection to a projector or an electronic whiteboard or a monitor.
Sci-CalR box has input ports for inputs from the Sci-tech trainer sensors.
Sci-CalR eliminates requirement of external computer.
Experiment Capabilities
- Steam plant performance, including the Rankine Cycle Analysis and the Willans Line
- Marcet Boiler Experiment on saturated steam (pressure temperature relationship)
Required Services
- Cool, clean mains water supply and drain: Maximum 150 litres/hour (2.5 Litres/minute) and with low mineral content.
- Electrical supply: • 220 to 240 VAC single phase, 50/60 Hz 32 A
Model Number
BSG 009
See also different:
Sci-tech Twist & Bending Machine Model MT 090 is a combined apparatus for the demonstration of both twist and bend to be used in the laboratory or as a complement of the theoretical study about twist and bend. Its size and weight facilitat [...]
