INTEGRATOR, DIFFRENTIATOR, SUMMING & DIFFERENCE AMPLIFIER USING 741 TRAINER Model ETR 020
INTEGRATOR, DIFFRENTIATOR, SUMMING & DIFFERENCE AMPLIFIER USING 741 TRAINER Model ETR 020
Specifications OUTPUT Waveform – Square Frequency and Amplitude Adjustment is provided using Potentiometers. One LED indicator to indicate Power Input. On-board Circuits Adder. Subtractor Integrator Differentiator. Fixed DC power supply: + 12 V/ 200mA Fixed DC power supply: + 5 V/ 200mA Variable DC power supply: 0 to 15 V/150mA Supply connections to OP Amp (± 12 V) Internally provided to the circuit.
- Interconnections
- All interconnections are made using 2mm banana Patch cords.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy SMOBC PCB is used.
- High impact plastic enclosures.
- Set of 2mm Patch cords for interconnections.
- User’s Manual with sample experimental programs
| Size: | 40cm x 30cm x 12cm (LxWxH) |
| Weight: | 5 kg |
Item Description
OUTPUT Waveform – Square
Frequency and Amplitude Adjustment is provided using Potentiometers.
One LED indicator to indicate Power Input.
On-board Circuits
Adder.
Subtractor
Integrator
Differentiator.
Fixed DC power supply: + 12 V/ 200mA
Fixed DC power supply: + 5 V/ 200mA
Variable DC power supply: 0 to 15 V/150mA
Supply connections to OP Amp (± 12 V) Internally provided to the circuit.
- Interconnections
- All interconnections are made using 2mm banana Patch cords.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy SMOBC PCB is used.
- High impact plastic enclosures.
- Set of 2mm Patch cords for interconnections.
- User’s Manual with sample experimental programs
Technical Specifications
Specifications
OUTPUT Waveform – Square
Frequency and Amplitude Adjustment is provided using Potentiometers.
One LED indicator to indicate Power Input.
On-board Circuits
Adder.
Subtractor
Integrator
Differentiator.
Fixed DC power supply: + 12 V/ 200mA
Fixed DC power supply: + 5 V/ 200mA
Variable DC power supply: 0 to 15 V/150mA
Supply connections to OP Amp (± 12 V) Internally provided to the circuit.
- Interconnections
- All interconnections are made using 2mm banana Patch cords.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy SMOBC PCB is used.
- High impact plastic enclosures.
- Set of 2mm Patch cords for interconnections.
- User’s Manual with sample experimental programs
Model Number
ETR 020
See also different:
The Sci-tech 20M Adjustable Bed Flow Channel Unit Model FM 32 10M~20M is suitable for demonstrations and teaching of open channel flows. By closing the top of the channel, the unit can also be used to demonstrate duct flows. The complete unit [...]
