Instrumentation Control Trainers Series Model PCT 008 Series
Home » Products » Instrumentation Control Trainers Series Model PCT 008 Series
Instrumentation Control Trainers Series Model PCT 008 Series
Model PCT 008-01 : Sci-tech DISPLACEMENT MEASUREMENT USING LVDT TRAINER
Model PCT 008-02: Sci-tech PRESURE MEASUREMENT WITH PRESSURE GENERATOR
Model PCT 008-03: Sci-tech LOAD MEASUREMENT USING STRAIN GUAGE (LOAD CELL)
Model PCT 008- 04: Sci-tech TEMPERATURE MEASUREMENT USING THERMOCOUPLE
Model PCT 008-05: Sci-tech TEMPERATURE MEASUREMENT USING RTD (PT-100)
Model PCT 008-06: Sci-tech LDR TRAINER KIT
Model PCT 008-07: Sci-tech LEVEL INDICATOR KIT
Model PCT 008-08: Sci-tech SPEED MEASUREMENT KIT
Model PCT 008-10: Sci-tech ANGULAR DISPLACEMENT KIT
Model PCT 008-11: Sci-tech THERMISTOR / AD590 KIT
Item Description
Model PCT 008-01 : Sci-tech DISPLACEMENT MEASUREMENT USING LVDT TRAINER
Transducer
– LVDT Transducer with transparent enclosure.
– Displacement of ± 5mm
– Primary Excitation voltage of Sine wave 1Vp-p
Measurement Options
– On-board Digital Panel Meter provided
– Output available on 2mm Banana sockets for Monitoring
– Screw Gauge for reference displacement reading
Model PCT 008-02: Sci-tech PRESURE MEASUREMENT WITH PRESSURE GENERATOR
Transducer
– Resistive Pressure Transducer with transparent enclosure.
– Pressure of 0-300mm hg / 6psi
– Primary Excitation voltage of 5V DC
Measurement Options
– On-board Digital Panel Meter provided
– Output available on 2mm Banana sockets for Monitoring
– Pressure generation and Monitor using a Mercury gauge manometer
Model PCT 008-03: Sci-tech LOAD MEASUREMENT USING STRAIN GUAGE (LOAD CELL)
Transducer
– Resistive Load cell is used.
– Load in weights can be measured up to 3 KGs.
– Primary Excitation voltage of 12V DC
Measurement Options
– On-board Digital Panel Meter provided
– Output available on 2mm Banana sockets for Monitoring
– Weights can be verified by Physical counting of weights
Model PCT 008- 04: Sci-tech TEMPERATURE MEASUREMENT USING THERMOCOUPLE
Sensor
– K-type Thermocouple is used.
– Temperature measurement up to 100ºC
Measurement Options
– On-board Digital Panel Meter provided
– Output available on 2mm Banana sockets for Monitoring
– Thermometer for measurement of temperature
Model PCT 008-05: Sci-tech TEMPERATURE MEASUREMENT USING RTD (PT-100)
Sensor
– PT-100 Type RTD sensor is used
– Temperature measurement up to 100ºC
Measurement Options
– On-board Digital Panel Meter provided
– Output available on 2mm Banana sockets for Monitoring
– Thermometer for measurement of temperature
Model PCT 008-06: Sci-tech LDR TRAINER KIT
Sensor
– LDR or Photo-Transistor is used for light sensing.
Measurement Options
– Output available on 2mm Banana sockets for Monitoring
– Relay output for Alarm indication
Model PCT 008-07: Sci-tech LEVEL INDICATOR KIT
Transducer /Sensor
– Capacitive Level Transducer.
– Level Measurement up to 150mm is possible
Measurement Options
– On-board Digital Panel Meter provided.
– Output available on 2mm Banana sockets for Monitoring.
– Scale for level measurement
Model PCT 008-08: Sci-tech SPEED MEASUREMENT KIT
Transducer /Sensor
– Magnetic Pick-up Transducer is used.
– Photo Pick up Transducer is also used
Measurement Options
– On-board Digital Panel Meter provided.
– Output available on 2mm Banana sockets for Monitoring
Model PCT 008-10: Sci-tech ANGULAR DISPLACEMENT KIT
Transducer /Sensor
– Capacitive Level Transducer.
– Resistive Transducer using multi turn potentiometer.
– Angular Measurement of 0° to 360°.
Measurement Options
– On-board Digital Panel Meter provided.
– Output available on 2mm Banana sockets for Monitoring.
– Protractor for angle measurement
Model PCT 008-11: Sci-tech THERMISTOR / AD590 KIT
Transducer /Sensor
– AD590 /Thermistor Sensor is used.
– Temperature measurement up to 100ºC
Measurement Options
– On-board Digital Panel Meter provided.
– Output available on 2mm Banana sockets for Monitoring
– Thermometer for measurement of temperature
Technical Specifications
Model PCT 008-01 : Sci-tech DISPLACEMENT MEASUREMENT USING LVDT TRAINER
Onboard Features
– Provided with excitation voltage
– Onboard Instrumentation Amplifier provided
– Block Description Screen printed on glassy epoxy PCB.
– Facility to Interface with PC (Optional)
– Facility to Interface with 8085/86/51 kit(Optional).
Interconnections
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
-User’s Manual with sample experimental programs
Model PCT 008-02: Sci-tech PRESURE MEASUREMENT WITH PRESSURE GENERATOR
Onboard Features
– Provided with excitation voltage
– Onboard Instrumentation Amplifier provided
– Block Description Screen printed on glassy epoxy PCB
– Facility to Interface with PC (Optional)
– Facility to Interface with 8085/86/51 kit(Optional)
Interconnections
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
– User’s Manual with sample experimental programs
Model PCT 008-03: Sci-tech LOAD MEASUREMENT USING STRAIN GUAGE (LOAD CELL)
Onboard Features
– Provided with excitation voltage
– Weights of different denominations provided
– Onboard Instrumentation Amplifier provided
– Block Description Screen printed on glassy epoxy PCB
– Facility to Interface with PC (Optional)
– Facility to Interface with 8085/86/51 kit(Optional)
Interconnections
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
– User’s Manual with sample experimental programs
Model PCT 008- 04: Sci-tech TEMPERATURE MEASUREMENT USING THERMOCOUPLE
Onboard Features
– Thermometer for measurement of temperature up to 100ºC
– Water Heater with AC mains Chord provided
– Onboard Instrumentation Amplifier provided
– Block Description Screen printed on glassy epoxy PCB
– Facility to Interface with PC (Optional)
– Facility to Interface with 8085/86/51 kit(Optional)
Interconnections
– All interconnections are made using 2mm banana Patch cords.
-Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
-Bare board Tested Glass Epoxy SMOBC PCB is used.
In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
– User’s Manual with sample experimental programs
Model PCT 008-05: Sci-tech TEMPERATURE MEASUREMENT USING RTD (PT-100)
Onboard Features
– Thermometer for measurement of temperature up to 100ºC
– Water Heater with AC mains Chord provided
– Onboard Instrumentation Amplifier provided
– Block Description Screen printed on glassy epoxy PCB
– Facility to Interface with PC (Optional)
– Facility to Interface with 8085/86/51 kit (Optional)
Interconnections
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
– User’s Manual with sample experimental programs.
Model PCT 008-06: Sci-tech LDR TRAINER KIT
Onboard Features
– On Board Relay provided to explain the function of LDR
– Onboard Instrumentation Amplifier provided
– Block Description Screen printed on glassy epoxy PCB
– Facility to Interface with PC (Optional)
– Facility to Interface with 8085/86/51 kit (Optional)
Interconnections
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
– User’s Manual with sample experimental programs.
Model PCT 008-07: Sci-tech LEVEL INDICATOR KIT
Onboard Features
– Onboard Instrumentation Amplifier provided.
– Block Description Screen printed on glassy epoxy PCB.
– 1feet Scale is provided for level measurement.
– Plastic container with outlet Tap is provided for Water Storage.
– Facility to Interface with PC (Optional)
– Facility to Interface with 8085/86/51 kit(Optional)
Interconnections
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
– User’s Manual with sample experimental programs.
Model PCT 008-08: Sci-tech SPEED MEASUREMENT KIT
Onboard Features
– Onboard Instrumentation Amplifier provided.
– Block Description Screen printed on glassy epoxy PCB.
– 6V DC Motor with necessary attachment for measurement is provided
Interconnections
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
– User’s Manual with sample experimental programs.
Model PCT 008-10: Sci-tech ANGULAR DISPLACEMENT KIT
Onboard Features
– Onboard Instrumentation Amplifier provided.
– Block Description Screen printed on glassy epoxy PCB.
– On board Protractor for angle measurement.
– Facility to Interface with PC (Optional).
– Facility to Interface with 8085/86/51 kit(Optional).
Interconnections
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
– User’s Manual with sample experimental programs.
Model PCT 008-11: Sci-tech THERMISTOR / AD590 KIT
Onboard Features
– Onboard Instrumentation Amplifier provided.
– Block Description Screen printed on glassy epoxy PCB.
– Thermometer for measurement of temperature up to 100ºC.
– Facility to Interface with PC (Optional).
– Facility to Interface with 8085/86/51 kit(Optional)
Interconnections
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
– Set of 2mm Patch cords for interconnections
– User’s Manual with sample experimental programs.