Electrical Lighting Installation Trainer Model ELTR 017

Electrical Lighting Installation Trainer Model ELTR 017

Sci-tech Electrical Lighting Installation Trainer Model ELTR 017 is designed to provide student with a good foundation in electrical technology and to prepare them for career as an installation/service technician.

The system consists of a number of modules which are suitable for the study of electrical measurement, electrical installation and for the troubleshooting of electrical installations. Each module contains real electrical components such as lamps, push buttons, timers, circuit breakers and relays. These modules can be arranged on the panel frame stand in a variety of configuration to make many different and interesting installations.

Connection between the components or between the modules are made by using 4mm test leads which plug into 4mm color coded heavy-duty binding posts. This will then allow the students to do the wiring quickly and with many variations, so that the learning will become more interesting and effective. The trainer comes complete with laboratory manual which contains many experiments on electrical installation technology. Mobile Training Frame is available to mount the panels.

 

Courseware:

The trainer includes operation manual and experiment manual which includes step-by- step chapter with theoretical information and practical students experiments. Each chapter includes student test with an answer key.

Modules:

The modules meet the following requirements.

The module features real industrial components mounted on 5mm transparent Plexiglas panels that easily and securely fit into the training panel frames.

 

Panels can be quickly arranged in various configurations so as to conduct many experiments. Panels are A4, A5 or A6 in size (or similar near to sizes) and feature.  The electrical circuit diagram is printed on each panel. All components are brought out to 4mm color coded heavy –duty binding posts. Wiring from the component to the terminal is also color coded so as to enhance the students learning experience. Inter connection between the panels and components are  made via 4mm stackable test leads .

 

Stackable test leads allows multiple connections from a single point, which is very useful when taking electrical measurements. Therefore the student is able to relate the circuit theory with the practical aspects of the real component  and actual wiring connections.

Item Description

Sci-tech Electrical Lighting Installation Trainer Model ELTR 017 is designed to provide student with a good foundation in electrical technology and to prepare them for career as an installation/service technician.

The system consists of a number of modules which are suitable for the study of electrical measurement, electrical installation and for the troubleshooting of electrical installations. Each module contains real electrical components such as lamps, push buttons, timers, circuit breakers and relays. These modules can be arranged on the panel frame stand in a variety of configuration to make many different and interesting installations.

Connection between the components or between the modules are made by using 4mm test leads which plug into 4mm color coded heavy-duty binding posts. This will then allow the students to do the wiring quickly and with many variations, so that the learning will become more interesting and effective. The trainer comes complete with laboratory manual which contains many experiments on electrical installation technology. Mobile Training Frame is available to mount the panels.

Technical Specifications

The trainer has the following specifications:

Residential Switches:

  1. Mounted on Plexiglas s panels with 4mm terminals
  2. Switch , surface mount, 2 way, 2 terminal, 10A , 1gang (4 modules)
  3. Switch, surface mount, 2 way, 3 terminals, 10A, 1 gang (4 modules)
  4. Switch, surface mount, 2 way, 4 terminals, 10A, 1 gang (4 modules)
  5. Switch, surface mount, 2 way, Intermediate, 10A, 1 gang (4 modules)
  6. Switch, surface mount, 1 way, 2 terminals, 10A, 2 gang (2 modules)
  7. Switch, surface mount, 2 way, 3 terminals, 10A, 2 gang (2 modules)
  8. Switch, surface mount, 2 way, 4 terminals, 10A, 2 gang (2 modules)
  9. Switch, surface mount  marked “Bell” (2 modules)
  10. Switch, surface mount,  illuminated  (2 modules)
  11. Switch, surface mount,  dimmer  (2 modules)
  12. Switch, ceiling pull type, 1way, 3 terminal, 10A (2 modules)
  13. Bell/Door opener push button: (1 module)
  14. 2 SPST switches 250 VAC, 110A

 

Sockets Sets:

The sockets are mounted onto plexiglass  panel with 4mm terminals, each socket includes a matching plug.

  1. 1 Phase socket with switch , 13A, 3 prong, 1gang (3 modules)
  2. 1 Phase socket with switch , 13A, 3 prong, 2gang (2 modules)
  3. 1 phase socket ,Shuko Type, 16A, 1 gang (5 modules)
  4. 1 phase industrial Socket , with cover, 16A, 2Pole & Earth (2 modules)
  5. 3 phase industrial socket , with cover, 16A ,2Pole with Neutral & Earth (2 modules)
  6. 1 phase CEE ,16A, 3 Round Prong (2 modules)

 

Industrial switches:

  1. Toggle switches , 2PST (4 modules)
  2. Push Button,1 NO 1NC (2 modules)
  3. Cam Switches, ON /OFF (2 modules)
  4. Selector switch, (for three phase amperage measurement)(1 module)
  5. Selector switch (for three phase voltage measurement) (1 module)
  6. Stepping relay for sequencing : 2SPST switches with 4 sequences (1 module)
  7. Latching relay:(1modules)
  8. 2 relay with Bistable operating contacts, coil,
  9. 24 VAC, 3 contacts, 48VAC, 2A

 

Circuit Breakers:

  1. MCB,1 phase, 6A (5 modules)
  2. MCB,1 phase, 16A (2 modules)
  3. MCB,3 phase, 16A (1 module)
  4. ELCB,1 phase (1 module)
  5. ELCB,3 phase (1 module)
  6. NFB,1 phase (1 module)

 

Lights and Fixtures:

It includes match lamp holders complete with lamps mounted on to plexiglass panels with 4mm terminals,

  1. Incandescent lamp holder with bulb ,E27,220V (4modules)
  2. Incandescent lamp holder with bulb ,E14,220V (4modules)
  3. Fluorescent lamp holder with starter and ballast,10W (2modules)
  4. Fluorescent lamp holder with starter and ballast, 20W (2modules)
  5. Mercury lamp holder with lamp (2 modules)
  6. Pilot signalling lights, 24VAC, (1modules)
  7. Set of three (red, yellow, green)
  8. Filament tungsten lamp
  9. tungsten filament lamp
  10. Metal Halide lamp
  11. High pressure sodium lamp
  12. Low pressure sodium lamp

 

Controls and Components:

  1. Control transformer, input 220 VAC, output 6/12/24 (2 modules)
  2. Control relay : 24 VAC, 2NO 2NC (2 modules)
  3. Control relay : 220VAC, (2 modules)
  4. Timer : 24hours 2NO 2NC (1 module)
  5. Door Bell, 12VAC (1module)
  6. Buzzer ,12VAC (1module)

 

Measuring Instruments:

  1. Mains input panel for Single and Three phase (1 module)
  2. Set of stackable 4mm connection test leads (set)
  3. Test leads stands of stackable cable (One)
  4. Ampere meter :0 to 20 Amps (1 module)
  5. Voltmeter : 0 to 500VAC (1 module)
  6. Ampere meter : 0-5 Amps (1module)

 

Telephone/Intercom Modules:

  1. Door phone signalling board (1 module)
  2. Master phone / Intercom (2 rooms + door station + buzzer) (1 module)
  3. Substation phone / Intercom (2 modules)
  4. Signalling push button (maid / porter / valet) (1 module)
  5. Electric door lock 12V(1 module)

 

Training Panel Frames:

  1. Three Level Mobile Frames with 4 rails (1 module)
  2. Height : 1850mm , Width : 1100mm

 

Optional:

HIGH VOLTAGE NEON LAMP TEST TRAINER

TECHNICAL SPECIFICATION

  • Fireman Switch: AC230V, 50Hz, 2 Pole
  • MCB: 10A, AC230V, 50Hz, 2 Pole
  • Timer: Pre-set Time to Switch On/Off for the Electrical Appliances, Quartz, with supply failure reserve at 20°C, 200h after being connected for 120 h, Max. Power With Incandescent Lamp – 1000W, IP 30, 24hrs Operation Cycle, 1 Changeover Switch, According to Standard EN 60730-2-7
  • Switch: 1Gang, 1 Way, 20A , 230V, 50Hz, 2 Pole
  • Transformer Rated Input Power(<VA): 450W, AC 230V, 2A, 50Hz
  • Transformer Rated Output Power(KVA): 450W, AC 15kV, 30mA, 50Hz
  • Neon Lamp: Dia. 10mm with wording

 

Additional Items:

  1. Additional meters to enhance the measurement capabilities
  2. Storage Cabinets are available for safe and secure storage of the Panel Modules.
  3. Double Door Storage cabinet with slots to accommodate the panels (Optional)

 

Electronic Fault insertion system:

  1. Multiple electronic fault insertion system :

This system allows for multiple faults to be inserted at any one time. Faults can be inserted individually or in groups

  1. Circuit block diagram electronic fault display panel :

Features electronic schematic block diagram with faults indicated by LEDs. When the fault is electronically activated a corresponding LED will illuminate showing the fault is active.

  1. Student Testing Mode :

The LED fault indication display can be deactivated so that the faults can be active but the display can be switched Off

  1. Electronic Fault Reset Button :

The LED control should have a fault-reset button that will clear and reset  the system back to normal.

  1. Test Points :

The trainer has short circuit protected test points that allow the student to take measurements during the troubleshooting exercises.

Extra Accessories (Optional):

  • 5 Digit Digital Multi-meters
  • Digital Lux Meter

Model Number

ELTR 017

See also different:

Whirling Shaft Apparatus & Accessories Model MT 111
Whirling Shaft Apparatus & Accessories Model MT 111

Sci-tech Whirling Shaft Apparatus Model MT 111 experimental unit teaches knowledge about how to determine the critical speeds. Illustrative experiments are used to explain resonance and supercritical or subcritical states of a vibrating system [...]

Oscillators Trainer Model ETR 062
Oscillators Trainer Model ETR 062

Model ETR 062/1 Model ETR 062/2 Model ETR 062/3

Absorption Refrigeration Trainer RAC 011
Absorption Refrigeration Trainer RAC 011

Sci-tech Absorption Refrigeration Training Model RAC 011 is based on basic absorption system designed with scale down module for training purpose. This module is designed to enable student to understand the theory and practice of absorption sy [...]


| << return to catalog |