Automotive Ignition Demonstration Trainer Model AM 176
Automotive Ignition Demonstration Trainer Model AM 176
Base Stand:
This is made up of Aluminum bound sheets & Sections. This is painted specially with Powder coating. All equipment are mounted on base stand.
Spark Plugs:
Trainer consists of Spark plugs, which are connected in S.I.Engines are shown on the panel. These spark plugs spark for the combustion of the fuel and hence power is generated in the engines due to combustion. So the main purpose of Spark plug in the engine is to ignite the fuel is given through the distributor according to firing of engine.
Item Description
Distributor
Distributor’s main function is to distribute the spark from the ignition coil to the spark plug by making arrangement of normally open and closing according to the firing order of the respective cylinder. It also controls and regulates the sparking in the engine through the point contact and condenser present in the Distributor.
Ignition Coil
Ignition Coil gives continuous 12 V DC Supply to the Distributor and further goes to the spark plug. It also has resistance to take away the full load of heat through the coil in case of voltage drop.
Technical Specifications
Specifications:
Capacity: 12V DC
Make: Lucas.
LIST OF EXPERIMENTS
To study the automotive Ignition Demonstration and the accessories used in the Ignition kit.
OPERATION & MAINTENANCE MANUAL
Self-explanatory operating & maintenance manual will be provided. This will include Theory, operating procedure, standard results, and maintenance procedures.
SERVICE REQUIRED AT SITE
Electric Power Supply 230 V AC, 50 Hz.
See also different:
Sci-tech Open Wind Tunnel - Subsonic Model AT 002 setup is an open wind tunnel used to demonstrate and measure the aerodynamic properties of various models. For this purpose, air is drawn in from the environment and accelerated. The air flows [...]
