Item Description

Sci-tech Air Operated Impulse Turbine Model FM 112, the working medium has the same static pressure in front of and behind the rotor. The conversion of pressure energy into kinetic energy takes place in the fixed nozzles of the distributor, not at the turbine rotor. This compressed-air driven experimental unit can be used to understand turbines powered by steam or water.

The conversion of pressure energy into kinetic energy takes place in the fixed nozzles of the distributor, not at the turbine rotor. This compressed-air driven experimental unit can be used to understand turbines powered by steam or water.
The FM 112 is a single-stage, axial impulse turbine. The turbine consists of a rotor that is installed inside a transparent housing, a distributor with four nozzles and a band brake for applying a load to the turbine. The number of active nozzles can be adjusted by means of the valves. The compressed air velocity is increased in the nozzles. The air flow that hits the blades generates an impulse that causes the rotor to start moving.
The inlet and outlet pressure at the turbine are indicated on manometers. The turbine torque is determined by measuring the force on the band brake. The speed is measured with an optical speed sensor. Torque, speed and temperatures are digitally displayed. The air flow rate is measured with a rotameter and set by means of a valve. The turbine is fitted with a solenoid valve as a safety device in case of over-speed. The brake drum on the turbine shaft is cooled by the compressed air.