4G GSM Smart Mobile Phone Trainer Model ETR 046
4G GSM Smart Mobile Phone Trainer Model ETR 046
Sci-tech 4G GSM Smart Mobile Phone Trainer Model ETR 046 is an ideal training equipment to teach the operations of 4G Dual SIM Mobile phone. The complete Block of Mobile Phone is printed on single PCB for easy understanding of function of different blocks. The trainer enables to fully understand the various parts and their functions of a 4G smart mobile phone. As the main pcb of the phone is replicated/expanded on a large pcb of the trainer, each and every part of the mobile phone structure can be understood and their signal wave-forms, functions can be understood. Test points allow the analysis and monitoring of the signals in different sections. By using the fault simulation method, it is possible to introduce the most common breakdowns and their rectification. The trainer not only enables students to fully understand the functions of a 4G smart mobile phone but also teaches them to repair or replace faulty parts of a 4G smart mobile phone.
| Size: | 40cm x 40cm x 12cm (LxWxH) |
| Weight: | 12 kg |
Item Description
Features
- Test points are provided to analyze signals at various points.
- 40 nos of Fault Switches are provided.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy SMOBC PCB with Block Diagram.
- AC Input: 220~240V ± 10%, 50 Hz
- Attractive ABS Enclosure
- User Manual for Experiments
Sci-tech 4G GSM Smart Mobile Phone Trainer Model ETR 046 is an ideal training equipment to teach the operations of 4G Dual SIM Mobile phone. The complete Block of Mobile Phone is printed on single PCB for easy understanding of function of different blocks. The trainer enables to fully understand the various parts and their functions of a 4G smart mobile phone. As the main pcb of the phone is replicated/expanded on a large pcb of the trainer, each and every part of the mobile phone structure can be understood and their signal wave-forms, functions can be understood. Test points allow the analysis and monitoring of the signals in different sections. By using the fault simulation method, it is possible to introduce the most common breakdowns and their rectification. The trainer not only enables students to fully understand the functions of a 4G smart mobile phone but also teaches them to repair or replace faulty parts of a 4G smart mobile phone.
Technical Specifications
TECHNICAL SPECIFICATIONS
- Network: GSM / HSPA / LTE
- 2G bands: GSM 850 / 900 / 1800 / 1900 – SIM 1 & SIM 2
- 3G bands: HSDPA 850 / 900 / 1900 / 2100
- 4G bands: LTE band 1(2100), 3(1800), 5(850), 8(900), 20(800), 40(2300)
- CPU
- Exynos 3475
- 3GHz Cortex-A7 quad-core
- Mali-T720
- Operating system: Android
- RAM: 1 GB
- Internal Storage: 8 GB
- External Storage: Up to 256 GB
Display
- Type: Super AMOLED capacitive touch screen, 16M colors
- Size: 4.7 inches, 60.9 cm2 (~64.7% screen-to-body ratio)
- Resolution: 540 x 960 pixels, 16:9 ratio (~234 ppi density)
- Camera
- Selfie Camera: 2 MP, f/2.2
- Rear Camera: 5 MP
- Communication
- WLAN: Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
- Bluetooth: 4.1, A2DP
- GPS: Yes, with A-GPS, GLONASS GPS
- Radio: FM radio, RDS, recording
- Sensors: Accelerometer, proximity
- Battery: Li-Ion 2000 mAh battery
- Connectivity: USB 2.1Version, 3.5mm Stereo Ear jack, Bluetooth Version v4.1
- On-board Blocks
- Dual SIM block: Two nos. of DUAL SIM Slots is provided.
- Li-ion battery block: Battery Block is provided
- Display block: 4.7 inch TFT Display is provided
- Power & Volume block: Keypad block with Power and Volume control Key is provided
- MIC block: MIC for Audio Input is provided.
- Hand free MIC block: Hand free MIC block is provided
- Speaker block: Speaker block is provided
- Ear phone block: Ear Phone block is provided to connect, Ear phone for Audio output
- Vibrator motor block: Vibrator motor block is provided
- USB block: USB block is provided for data Transfer with Computer
- Power supply block: Power supply block for charging the battery.
- 43 Test points are provided to analyze signals at various points.
- 11 no’s of Fault Switches with 34 faults are Provided
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy SMOBC PCB with Block Diagram.
- AC Input: 230V ± 10%, 50 Hz
- Attractive ABS Enclosure
- User Manual for Experiments
Experiment Possibilities
- Understanding the infrastructure of 4G mobile phone
- Design criteria of 4G Mobile phone circuit explained on the pcb.
- 11 Fault switches allow creation of 34 faults and explanation to solve them.
- 43 test points enable students to analyze signals at various points.
- Power & Volume fault detection
- Microphone fault detection
- Speaker fault detection
- Display fault detection
- Earphone fault detection
- Data transfer through USB port for understanding functions
- Full understanding for enabling repair of 4G mobile phone
- Full understanding for enabling parts replacement of 4G mobile phone
Model Number
ETR 046
See also different:
Analogue & Digital Electronics Trainer Model ETR 003 is a Single Board Trainer Kit which is widely used to train engineers to Develop/Study hardware for any Digital / Analog components in laboratory. This board has the provision for bread [...]
