Technical Specifications

TECHNICAL SPECIFICATIONS

• The drive rig structure Size:

✓ Minimum 0.8m (L) x 0.6m (W)x 0.8m (H), Standard aluminium profile size of 40×40

✓ Aluminium base plate of minimum 12mm (or ½”) thickness

✓ The drive rig structure has 3 layers that come with 4 caster wheels and 4 adjustable leg stands.

• The drive rig is designed with belt or chain drive on a modular base plate to test run with the motor independently.
• The drive rig consists of 1 unit of AC induction motor with:

✓ 230V single phase

✓ Horsepower approx. 0.75hp

✓ Rated speed approx. 1400rpm

✓ Reversible rotation

✓ Manual speed control

✓ Foot mount

• The drive rig consists of 1 set of V-belt mechanism with:

✓ Industrial V-belt section type A

✓ 2 units of pulley with ratio 2:1″

• The drive rig shall consist of 1 set of chain mechanism with:

✓ Industrial standard roller chain drive (pitch 15mm)

2 units of steel sprocket with ratio 2:1

• The drive rig consists of 6 units of pillow block bearing with: Shaft diameter minimum 20mm
• The drive rig consists of 1 unit of right angle gearbox with: Gear reduction ratio of 2:1
• The drive rig consists of 2 units of coupling for: Induction motor Gearbox
• The drive rig consists of 1 unit of enclosure: Material is normal acrylic with minimum 5mm thick 4 units of handle 

EXPERIMENTAL CAPABILITIES:

The drive rig provides training on belt as well as chains drives:

• Alignment
• Tensioning