Deformation of Curved Axis Beams Model MT 022
Deformation of Curved Axis Beams Model MT 022
In construction engineering, a distinction is made between beams and arches. An arch is a statically indeterminate supported structure with a curved axis and two fixed support bearings or clamp fixings. The support bearings of an arch (such as a double-articulated arch) absorb forces vertically and horizontally. The ends of the arch in the bearings do not move. This produces the static arching effect of the system. In mechanical engineering, crane hooks and chain links are typical examples of a curved beam.
Sci-tech Deformation of Curved-Axis Beams Model MT 022 includes three different beams, borne on statically determinate supports: a circular beam, a semi-circular beam and a quadrant beam.
The beam under test is loaded with a set of weights. Dial gauges record its horizontal and vertical deformations. All three beams have the same cross-section and so the same 2nd moment of area. This enables test results to be directly compared.
Simi-circular and circular beams are fixed to a bearing on the pillar. The quadrant beam is clamped into a bearing block.
The various elements of the experiment are clearly laid-out and housed securely in a storage system.
The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.
| Size: | 60cm x 40cm x 80cm (LxWxH) |
| Weight: | 15 kg |
Item Description
Features
* Elastic deformation of curved-axis beams1
* Circular, semi-circular and quadrant beams
In construction engineering, a distinction is made between beams and arches. An arch is a statically indeterminate supported structure with a curved axis and two fixed support bearings or clamp fixings. The support bearings of an arch (such as a double-articulated arch) absorb forces vertically and horizontally. The ends of the arch in the bearings do not move. This produces the static arching effect of the system. In mechanical engineering, crane hooks and chain links are typical examples of a curved beam.
Sci-tech Deformation of Curved-Axis Beams Model MT 022 includes three different beams, borne on statically determinate supports: a circular beam, a semi-circular beam and a quadrant beam.
The beam under test is loaded with a set of weights. Dial gauges record its horizontal and vertical deformations. All three beams have the same cross-section and so the same 2nd moment of area. This enables test results to be directly compared.
Simi-circular and circular beams are fixed to a bearing on the pillar. The quadrant beam is clamped into a bearing block.
The various elements of the experiment are clearly laid-out and housed securely in a storage system.
The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.
Technical Specifications
Specifications
[1] Elastic deformation of curved-axis beams under load
[2] 3 different beams with the same cross-section: circular beam, semi-circular beam, quadrant beam
[3] Bearing block to fix the quadrant beam
[4] Pillar with bearing to support the circular or semi-circular beam
[5] 1 set of weights to place the beam under load
[6] 3 dial gauges to record the horizontal and vertical deformation
[7] Storage system to house the components
Technical Specifications
Curved-axis beam
– radius: approx. 150mm
– cross-section WxH: 20x5mm
– material: stainless steel
Dial gauges
– measuring range: 0…20mm, graduations: 0,01mm Weights
– 1x 1N (hanger)
– 2x 2N
– 1x 5N
– 1x 10N
– 4x 20N
Experiments
– Bending behavior of a curved-axis beam
* circular beam
* semi-circular beam
* quadrant beam
– Application of the principle of virtual forces (the force method) to calculate deformation
– 2nd moment of area
– comparison of calculated and measured deformations
Scope of Delivery
1 base plate with pillar
3 beams
3 dial gauges
1 set of weights
2 hexagon socket wrenches
1 storage system with foam inlay
1 set of instructional material
Model Number
MT 022
See also different:
Sci-tech Orifice-meter, Venturi-meter & Rota-meter set up Model FM 46 is self-sufficient unit to study the characteristics of Orifice meter, Venturi-meter & Rota-meter. The calibration of these meters can be study by comparing with act [...]
Sci-tech Thin Cylinder Apparatus Model MT 055 been developed to enable the student to verify the various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an o [...]
The air-cooled single-cylinder four-stroke diesel engine is identical in design to the fourcylinder engine. A modified cylinder head permits additional experiments with various combustion chamber inserts. To adjust the mixture composition, the [...]