FUNDAMENTALS OF HYDRAULICS TRAINER SET UP Model HT 011

FUNDAMENTALS OF HYDRAULICS TRAINER SET UP Model HT 011

Sci-tech Fundamentals of Hydraulics Trainer Set Up Model HT 011 is designed to meet the requirements for learning complex inner dynamic structure and working principle of hydraulic components.

  • The structure of hydraulic component is designed according to real industrial hydraulic component, which is light in weight and small in size. Due to this, students can start or stop experiment in a short time.
  • All the hydraulic components are equipped with quick installing baseboard and quick connecting joint to ensure convenient operation. By using double-locking quick connecting tube, students can replace an oil tube in 6 seconds without leakage.
  • The PLC module and electrical control module are modular designed to avoid cross interference of electrical circuit when doing experiment.
  • Safety protections: grounded, lead protection, safety in accordance with related BS standards. Insulated safety sockets, sheathed cables and wires.
Size: 150cm x 60cm x 170cm (LxWxH)
Weight: 65 kg

Item Description

Sci-tech Fundamentals of Hydraulics Trainer Set Up Model HT 011 is designed to meet the requirements for learning complex inner dynamic structure and working principle of hydraulic components.

• The structure of hydraulic component is designed according to real industrial hydraulic component, which is light in weight and small in size. Due to this, students can start or stop experiment in a short time.

• All the hydraulic components are equipped with quick installing baseboard and quick connecting joint to ensure convenient operation. By using double-locking quick connecting tube, students can replace an oil tube in 6 seconds without leakage.

• The PLC module and electrical control module are modular designed to avoid cross interference of electrical circuit when doing experiment.

• Safety protections: grounded, lead protection, safety in accordance with related BS standards. Insulated safety sockets, sheathed cables and wires.

Technical Specifications

Specifications

  • Training system providing an introduction to the fundamentals of hydraulic control engineering
  • Aluminum profile panel for quick component fixing
  • Oil drip tray
  • Standard industrial hydraulic components
  • Various multi-way valves, pressure limiting, check, restrictor, flow control and non-return valves
  • Hydraulic motor
  • Diaphragm accumulator
  • Weighted piston with guard
  • Pressure hoses with self-closing quick-couplers
  • Drive unit with gear pump

 

 

Technical Parameters

  1. Input Voltage : Single-phase AC 220V, 50Hz
  2. Temperature : -10~50ºC, Below RH 90%
  3. Permanent magnet DC speed regulating motor: 1.8A, DC220V, 400W, 0~1200rpm
  4. Oil tank: 30L with liquid level meter, oil temperature indicating meter, oil filter, safety valve, etc.
  5. Overall power consumption：≤2.0 kVA

>SPECIFICATIONS

> HYDRAULIC COMPONENTS

  • Training Bench (Qty:1)

»Size: 1560mm×650mm×1800mm

  • Power supply control panel (Qty:1)

»Input: AC 220V

»Output: DC 24V

  • Button module (Qty:1)
  • Oil pump control module (Qty:1)
  • Intermediate relay module (Qty:1)
  • Power line (Qty:2)
  • Safety connecting line (Qty:40)
  • Pump station (400W) (Qty:1)
  • Hydraulic oil (20kg)
  • Funnel (Qty:1)
  • Lacquer tray (Qty:1)
  • Experimental tube (Qty:25)
  • Tools

»Scissor (Qty:1)

»Phillips screwdriver (Qty:1)

»Slot type screwdriver (Qty:1)

»Socket head wrench (Qty:4)

»Open wrench (Qty:2)

»Tool box (Qty:1)

»Three-plug socket (Qty:1)

»Pliers (Qty:2)

»Fuse (2A) (Qty:10)

  • Programming software (copy) (Qty:1)

»Auxiliary oil tank (Qty:1)

»Double acting hydro-cylinder (Qty:2)

»Spring return hydro-cylinder (Qty:1)

»Pressure hydro-cylinder (Qty:1)

»One-way valve (Qty:2)

»Hydraulic controlled one-way valve (Qty:2)

»Direct acting overflow valve (Qty:2)

»Pilot overflow valve (Qty:1)

»Throttle valve (Qty:1)

»Sequence valve (Qty:2)

»Speed regulating valve (Qty:2)

»Reducing valve (Qty:1)

»4/2 way stroke directional valve (Qty:1)

»5/3 way hand- directional valve (Qty:1)

»2/2 way solenoid directional valve (Qty:1)

»4/2 way solenoid directional valve (Qty:2)

»4/3 way solenoid directional valve (Qty:3)

»Pressure gage (Qty:3)

»Pressure relay (Qty:1)

»Travel switch (Qty:4)

»Four-way board (Qty:2)

»Three-way board (Qty:2)

 

Experiments Capabilities:

  • Comprehensive experimental introduction to the fundamentals of hydraulic drive and control engineering
  • Familiarisation with terms and symbols
  • Representation of hydraulic circuits
  • Drive unit
  • Multi-way valves and drives
  • Shut-off and flow control valves
  • Pressure valves and pressure switches
  • Hydraulic accumulators
  • Application circuits
  • Commissioning and maintenance

Model Number

HT 011

See also different:

Tension Coefficient Apparatus Model MT 077
Tension Coefficient Apparatus Model MT 077

Sci-tech Tension Coefficient Apparatus Model MT 077 consists of a jib restrained by two chain ties making a triangulated three-dimensional structure. The jib and both ties are fitted with spring balances so that the internal forces can be meas [...]

Conveyer Belt Trainer MODEL CBA-01
Conveyer Belt Trainer MODEL CBA-01

CONVEYER BELT TRAINER

DELTA MODULATION & DEMODULATION KIT Model TCM 005-14
DELTA MODULATION & DEMODULATION KIT Model TCM 005-14

Sci-tech Basic Communication Trainers TCM 005 Series offer students understand basic concepts of communication through exhaustive experiments. The Kits offer on-board necessary signal generator and power supply and silk screen printed circuit [...]


| << return to catalog |