ELECTRO-PNEUMATIC TRAINER Model HT 006
ELECTRO-PNEUMATIC TRAINER Model HT 006
Sci-tech Electro-Pneumatic Trainer Model HT 006 is a very versatile self – contained training package for the teachers and students in advanced pneumatics. It is designed for fail safe operation and ease of learning. Sci-tech Advanced Pneumatic Trainer meets the requirements of providing practical “HANDS ON” training and can be used both as an experimental kit and as a demonstrator. Various basic / advanced pneumatic circuits can be built easily due to special design of the trainer. The commonly used industrial pneumatic components and some electro – pneumatic components are provided for preparing various pneumatic circuits.
| Size: | 100cm x 50cm x 120cm (LxWxH) |
| Weight: | 65 kg |
Item Description
Features
- Pneumatic Trainer consists of flat control panel with general purpose component area on both sides and Mobile Table provided built using 40mm Aluminum profile rack.
- Facility to mount valves and cylinders with a provision for fixing hoses through push on connector & nylon tube facing the front of simulator.
- Valves can be easily attached/detached
- CE marked branded Components are used
- Suitable for working at 6bar pressure
- Electrical Control panel is a 30X30mm Aluminum profile rack with sturdy table top flat panels
- ABS plastic enclosed Panel Board with mimic diagram
- Drawer at the bottom on each side to keep components.
- All input & output are terminated in 4mm shrouded connector,
- 4mm Shrouded Patched Chords
Sci-tech Electro-Pneumatic Trainer Model HT 006 is a very versatile self – contained training package for the teachers and students in advanced pneumatics. It is designed for fail safe operation and ease of learning. Sci-tech Advanced Pneumatic Trainer meets the requirements of providing practical “HANDS ON” training and can be used both as an experimental kit and as a demonstrator. Various basic / advanced pneumatic circuits can be built easily due to special design of the trainer. The commonly used industrial pneumatic components and some electro – pneumatic components are provided for preparing various pneumatic circuits.
Many experiments can be performed. A detailed and comprehensive instruction manual is provided long with the trainer
Technical Specifications
Specifications
- FR+L unit (Isolating valve +Regulator)
- Filter Regulator Lubricator with 10 bar Pressure Gauge
- Non return Valve with Slide Isolation valve
- 8mm PU QRC connector
- Air Compressor (Silent Type) (OPTIONAL)
- 2HP 1 Phase 230V AC Motor
- 24 Litter Cylinder with Pressure Gauge
- 8 bar Pressure Switch for Auto start & stop.
- 10 bar pressure relief valve with 10 bar Gauge
- 8mm PU QRC connector
- To be placed at ground level
Electrical Panel
- DC Power Supply & Switch Panel
- 230V/50Hz AC Socket
- 24V/2A DC Output
- 5 no’s of Toggle Switch /2A
- Dual Timer Panel
- Dual Cyclic Timer Output
- 4 no’s of NO,NC control contacts /2A
- Switch Panel
- Two nos. of SPDT Switch Red, 230V/4A
- Two nos. of SPDT Switch Green, 230V/4A
- SPDT Emergency Switch, 230V/4A
- Illuminated Push Switch, 230V/4A
- Relay & Indicator Panel
- 3 numbers of Relay Output
- 5A NO,NC control contacts with coil voltage 24V/100mA
- 230V / 22mm Led Indicators (3nos)
List of Components
- ¼ inch B.S.P, 5 ports, 2 position both side pilot D.C. Valve – 2 No’s
- ¼ inch B.S.P flow regulator with check – 2 No’s
- ¼ inch B.S.P Shuttle valve – 1 No
- 1/8 inch B.S.P, 3/2 way push button operated spring off set D.C. Valve – 4 No’s
- 1/8 inch B.S.P, 3/2 way roller operated spring off set D.C. Valve – 4 No’s
- Two pressure valve (AND GATE) – 1 No
- Quick exhaust Valve – 1 No
- 1\4” B.S.P, F-R-L unit – 1 No
- Pressure Gauge – 1 No
- Double acting cylinder – 2 No’s
- Single acting cylinder with spring return – 1 No
Supplied with necessary accessories like PU tubes of dia 4 and dia 6mm; Tees and Plugs, Test Cables as well as 1 pipe cutter, Splicers, Hardware tools, etc. as per requirements.
Instruction cum Experiments Manual: Supplied in soft & hard copies, with experiment sheets
Requirements:
- Mains Input power 220~240V, 50Hz, 1Ph
- Industrial Grade Oil for Hydraulic Power Pack.
Model Number
HT 006
See also different:
Sci-tech Kinematic model: Ackermann Steering Mechanism Model MT 138 is used to study a steering trapezoid. The experimental unit comprises two track rods with drag link, two track-rod arms and two steering pins, where, in theory, the wheels ar [...]
