Flow Boiling Demonstration Apparatus Model BSG 005
Flow Boiling Demonstration Apparatus Model BSG 005
Sci-tech Flow Boiling Demonstration Apparatus Model BSG 005, the process of evaporation in heated pipes that occurs in water-tube boilers can be demonstrated. The different phases that appear during evaporation in the pipe can be clearly seen. The double-wall glass evaporation pipe allows the evaporation process to be observed closely. Hot water flows through the outer pipe and evaporates the medium in the inner pipe. The non-toxic liquid used starts to evaporate at 40 to 50°C. Low system pressures can be generated with the built-in water jet pump.
| Size: | 60cm x 45cm x 80cm (LxWxH) |
| Weight: | 65 kg |
Item Description
With Sci-tech Flow Boiling Demonstration Apparatus Model BSG 005, the process of evaporation in heated pipes that occurs in water-tube boilers can be demonstrated. The different phases that appear during evaporation in the pipe can be clearly seen. The double-wall glass evaporation pipe allows the evaporation process to be observed closely. Hot water flows through the outer pipe and evaporates the medium in the inner pipe. The non-toxic liquid used starts to evaporate at 40 to 50°C. Low system pressures can be generated with the built-in water jet pump.
The pipe systems are clearly laid out on a metal panel. The hot water circuit consists of an expansion vessel, a circulating pump and heater. An evaporation pipe, vapour collector, water-cooled condenser and return pipe form the evaporation circuit.
Technical Specifications
SYSTEM COMPONENTS
- Cooling water connection,
- Evaporator pipe,
- Shut off valve,
- Water jet vacuum pump,
- Collector with manometer, excess pressure valve and bleeding,
- Condenser,
- Hot water expansion vessel,
- Thermometer for hot water feed,
- Switch for heater and pump,
- Circulating pump,
- Electrical heater with thermostat
EXPERIMENTS
Evaporation Flow:
– Single phase liquid flow
– Bubbly flow
– Slug flow
– Annular flow
– Film boiling
– Drop flow (mist)
– Single phase vapour flow
Effect on the evaporation process:
– flow rate
– temperature
– pressure
OPERATION & MAINTENANCE MANUAL
Self-explanatory operating & maintenance manual will be provided. This will include Theory, operating procedure, standard results, and maintenance procedures.
SERVICE REQUIRED AT SITE
- Electric supply 220 ~ 240V AC, 50 Hz
- Water line
Model Number
BSG 005
See also different:
Sci-tech Over - Under Voltage Protection Relays Trainer Model ELTR 004-01 Sci-tech Directional Over Current Relay Trainer Model ELTR 004-02 Sci-tech Percentage Based Differential Relay Trainer Model ELTR 004-03 Sci-tech Power Factor Control Re [...]
Experiment investigating with the Sci-tech Unsymmetrical Bending and Shear Centre Apparatus Model MT 067, of different sectioned beams when the loading is not in the plane of a principal axis. A ‘U’ section, ‘L’ section and rectangular beam ca [...]
