Activated Sludge Process Apparatus Model FM 127

Activated Sludge Process Apparatus Model FM 127

Sci-tech Activated Sludge Process Apparatus Model FM 127 is the most important biological process in water treatment. FM 127 enables this process to be demonstrated.

Item Description

A pump delivers raw water contaminated with dissolved organic substances (organic matter) into the aeration tank. Aerobic microorganisms (activated sludge) in the aeration tank use the organic matter as a source of nutrition, biodegrading it in the process. Since aerobic microorganisms need oxygen, the raw water is aerated in the aeration tank. The activated sludge is mixed with the raw water by stirring machines. In the secondary clarifier the activated sludge is then separated from the treated water by sedimentation. A portion of the activated sludge is returned to the aeration tank (return sludge). The treated water is collected in a tank. It is also possible to convert ammonium into nitrate (nitrification) and nitrate into nitrogen (de-nitrification). For de nitrification a zone without aeration can be created in the aeration tank by installing a partition wall. The following flow rates are adjustable: raw water, return sludge, internal recirculation for pre-de-nitrification and air. Oxygen concentration, pH value and temperature can be controlled.
Optionally a software program can be provided to display the operation states and measure data. A process schematic shows the current operating states of the individual components and the measured data.
Samples can be taken at all relevant points. Activated sludge from a wastewater treatment plant and analysis technology are required for the experiments. Recommended parameters are: BOD5 (biochemical oxygen demand), COD (chemical oxygen demand), NH4 (ammonium) & NO3 (nitrate).

Features
 wastewater treatment plant in laboratory scale
 aerobic biological degradation of organic substances
 nitrification and pre-de-nitrification

Technical Specifications

Specifications
1. Biological wastewater treatment
2. Aeration tank with 3 stirring machines
3. Secondary clarifier
4. Nitrification and pre-de-nitrification
5. Separate supply unit with 2 stirring machines
6. All relevant flow rates adjustable
7. Control of temperature, pH value and oxygen concentration
8. Measurement of flow rate, temperature, pH value and oxygen concentration
9. Optional software for data acquisition via USB under Windows and display of the operation states & visual inspection with webcam on PC

Technical Specifications
Aeration tank
 capacity nitrification zone: approx. 34L
 capacity de-nitrification zone: approx. 17L
Tanks
 secondary clarifier: 30L
 raw water tank: 200L
 treated water tank: 80L
Flow rates
 raw water pump: max. 25L/h
 return sludge pump: max. 25L/h
 circulation pump: max. 25L/h
Speeds (stirring machines)
 secondary clarifier: max. 45min-1
 all others: each max. 600min-1
Measuring ranges
 flow rate:
 2…25L/h (raw water)
 50…550L/h (compressed air)
 temperature: 0…40°C
 pH value: 0…14
 oxygen concentration: 0…10mg/L

Experiments:
 learning the fundamental principle of the activated sludge process
 functional principle of nitrification and pre-de-nitrification
 creation of a stable operating state
 identification of the following influencing factors
 return sludge ratio
 return ratio of the internal recirculation
 sludge age
 sludge loading
 volumetric loading
 oxygen concentration, pH value and temperature
 efficiency of the pre-de-nitrification

Requirements
 Mains Power 220 – 240V @ 50Hz, 1Ph

See also different:

MICRO-RIVER SIMULATOR TRAINER Model FM 73
MICRO-RIVER SIMULATOR TRAINER Model FM 73

Sci-tech Rainfall Run off Simulator Model FM 73 demonstrates some of the major physical processes found in hydrology and fluvial geomorphology, including: rainfall hydrographs for catchment areas of varying permeability; the abstraction of gro [...]

CENTRIFUGAL BLOWER TEST APPARATUS Model FM 22
CENTRIFUGAL BLOWER TEST APPARATUS Model FM 22

Sci-tech Centrifugal Blower Test Apparatus Model FM 22 enables to study of performance of centrifugal blower (Compressor) & its calculation is main focus in designing this trainer. System is having Driving motor, Centrifugal Blower (Compre [...]

Plunger Pump Demonstration Apparatus Model FM 88
Plunger Pump Demonstration Apparatus Model FM 88

Sci-tech Plunger Pump Demonstration Apparatus Model FM 88 is a motor driven plunger pump, mounted on a stainless-steel plinth with a water reservoir, pulsation damper and pipework for continuous circulation. The pump head, measuring tank, puls [...]


| << return to catalog |