Technical Specifications

General Specification:

 Control and load unit for prepared four-stroke engines with a maximum power output of 11kW approx.
 Vibration-insulated base plate for mounting of the engine and the asynchronous motor
 Asynchronous motor with energy recovery unit as brake generates engine load
 Engine started by asynchronous motor
 Force transmission from engine to brake via elastic claw coupling
 Two separate fuel gauge systems
 Stabilisation tank for intake air 75L approx.
 Potentiometer for continuous adjustment of braking speed
 Measurement and display of temperatures (oil, fuel, air), engine load, engine speed, fuel consumption, air intake quantity, oil pressure
 Measured value displays for engine: exhaust gas temperature and cooling water temperatures
 Software for data acquisition (optional)

Technical Specifications
a) Asynchronous motor as brake
i) nominal power output: 11kW at 3000min-1
b) Energy recovery unit: 13kW
c) Measuring ranges
i) torque (approx. range): -200 to 200Nm
ii) speed (approx. range): 0 to 5000min-1
iii) intake air via differential pressure (approx. range): 0 to 938L/min
iv) temperatures (approx. range): 4x 0 to 120°C, oil: 1x 0 to 150°C, exhaust gas: 1x 0 to 900°C
v) cooling water flow rate (approx. range): 0 to 250L/h
vi) oil pressure (approx. range): 0 to 6bar

Requirements at Site
 Power: 400V, 50/60Hz, 3 phase
 Water connection approx: 500L/h
 Ventilation and exhaust gas routing