Characteristics of Semiconductors Model ETR 026 Series
Characteristics of Semiconductors Model ETR 026 Series
Sci-tech Characteristics of Semiconductors Model ETR 026A
Sci-tech Characteristics of Transistors Model ETR 026B
Sci-tech Characteristics of FET, MOSFET, IGBT Model ETR 026C
Sci-tech Characteristics of UJT, PUT, OPTO Model ETR 026D
Sci-tech Characteristics of SCR & TRIAC Model ETR 026E
Sci-tech Characteristics of LDR, Photodiode, Photo-Transistor & Solar Cell Model ETR 026F
Item Description
Sci-tech Characteristics of Semiconductors Model ETR 026A is a versatile trainer introducing the basic semi-conductors: Diodes, LEDs, DIAC etc their characteristics, functional configurations and their basic circuits/experiments. In built power supply enables independent testing. In built power supply enables independent testing.
Sci-tech Characteristics of Transistors Model ETR 026B is a versatile trainer introducing the transistors, their characteristics, functional configurations and their basic circuits/experiments. In built power supply enables independent testing.
Sci-tech Characteristics of FET, MOSFET, IGBT Model ETR 026C is a versatile trainer introducing FET, MOSFET & IGBT, their characteristics, functional configurations and their basic
circuits/experiments. In built power supply enables independent testing.
Sci-tech Characteristics of UJT, PUT, OPTO Model ETR 026D is a versatile trainer introducing UJT, PUT, OPTO, their characteristics, functional configurations and their basic circuits/experiments. In built power supply enables independent testing.
Sci-tech Characteristics of SCR & TRIAC Model ETR 026E is a versatile trainer introducing SCR & TRIAC, their characteristics, functional configurations and their basic circuits/experiments. In built power supply enables independent testing.
Sci-tech Characteristics of LDR, Photodiode, Photo-Transistor & Solar Cell Model ETR 026F is a versatile trainer introducing LDR, Photodiode, Photo-Transistor & Solar Cell, their characteristics, functional configurations and their basic circuits/experiments. In built power supply enables independent testing.
Technical Specifications
Model ETR 026A:
Specifications
– Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K.
– One LED indicator to indicate Power input.
– On-board Semiconductor Devices
– Silicon Diode
– Germanium Diode
– Zener Diode.
– Light Emitting Diode.
– DIAC
– Variable DC power supply : 0 to ± 15 V/150mA
– Variable DC power supply : 0 to ± 30 V/150mA
– All interconnections are made using 2mm banana Patch cords.
– Bare board Tested Glass Epoxy PCB is used.
– Attractive injection molded plastic enclosures.
– Set of 2mm Patch cords for interconnections
Model ETR 026B:
Specifications
– Variable Power Supply of 0 to +15 DC
– Variable Power Supply of 0 to +30 DC
– One LED indicator to indicate Power input.
– On-board Circuits
– Transistor CE Configuration.
– Transistor CC Configuration.
– Transistor CB Configuration.
– All interconnections are made using 2mm banana Patch cords.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy PCB is used.
– Attractive injection molded plastic enclosures.
– Set of 2mm Patch cords for interconnections
MODEL ETR 026C:
Specifications
– Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K.
– One LED indicator to indicate Power input.
– On-board Semiconductor Devices
– MOSFET
– FET/JFET
– IGBT
– Variable DC power supply : 0 to + 15 V/150mA
– Variable DC power supply : 0 to + 30 V/150mA
– All interconnections are made using 2mm banana Patch cords.
– Bare board Tested Glass Epoxy PCB is used.
– Attractive injection molded plastic enclosures.
– Set of 2mm Patch cords for interconnections
MODEL ETR 026D:
Specifications
– Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K.
– One LED indicator to indicate Power input.
– On-board Semiconductor Devices
– OPTO Configuration
– UJT Configuration
– PUT Configuration
– Variable DC power supply: 0 to + 15 V/150mA
– Variable DC power supply: 0 to + 30 V/150mA
– All interconnections are made using 2mm banana Patch cords.
– Attractive injection molded plastic enclosures.
– Bare board Tested Glass Epoxy PCB is used
MODEL ETR 026E:
Specifications
– Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K.
– Load of 1K, 5W resistance
– One LED indicator to indicate Power input.
– On-board Circuits
– SCR Configuration
– TRIAC Configuration
– Variable DC power supply : 0 to + 15 V/150mA
– Variable DC power supply : 0 to + 30 V/150mA
– All interconnections are made using 2mm banana Patch cords.
– Bare board Tested Glass Epoxy PCB is used.
– Set of 2mm Patch cords for interconnections
– Attractive injection molded plastic enclosures.
MODEL ETR 026F:
Specifications
– Resistance Block consisting of One Resistance of 1K and Two Potentiometer of 100K.
– One LED indicator to indicate Power input.
– On-board Circuits
– LDR-Configuration
– Lamp Block
– Solar Cell Configuration
– Photo Transistor/ Photo Diode Configuration
– Fixed DC Power Supply: 0 to +12V
– All interconnections are made using 2mm banana Patch cords.
– Bare board Tested Glass Epoxy PCB is used.
– Attractive injection molded plastic enclosures.
– Set of 2mm Patch cords for interconnections
See also different:
Sci-tech Differential Gear Assembly Model AM282 is an actual Cut Section.
Sci-tech Automotive Hydraulic Control Clutch Model AM 067 is used at carefully cut section of an hydraulic circuit controlling a diaphragm clutch for cars.
Sci-tech Basic Communication Trainers TCM 005 Series offer students understand basic concepts of communication through exhaustive experiments. The Kits offer on-board necessary signal generator and power supply and silk screen printed circuit [...]