Residential Switches:
a. Mounted on Plexiglas s panels with 4mm terminals
b. Switch , surface mount, 2 way, 2 terminal, 10A , 1gang (4 modules)
c. Switch, surface mount, 2 way, 3 terminals, 10A, 1 gang (4 modules)
d. Switch, surface mount, 2 way, 4 terminals, 10A, 1 gang (4 modules)
e. Switch, surface mount, 2 way, Intermediate, 10A, 1 gang (4 modules)
f. Switch, surface mount, 1 way, 2 terminals, 10A, 2 gang (2 modules)
g. Switch, surface mount, 2 way, 3 terminals, 10A, 2 gang (2 modules)
h. Switch, surface mount, 2 way, 4 terminals, 10A, 2 gang (2 modules)
i. Switch, surface mount marked “Bell” (2 modules)
j. Switch, surface mount, illuminated (2 modules)
k. Switch, surface mount, dimmer (2 modules)
l. Switch, ceiling pull type, 1way, 3 terminal, 10A (2 modules)
m. Bell/Door opener push button: (1 module)
n. 2 SPST switches 250 VAC, 110A
Sockets Sets:
The sockets are mounted onto plexiglass panel with 4mm terminals, each socket includes a matching plug.
a. 1 Phase socket with switch , 13A, 3 prong, 1gang (3 modules)
b. 1 Phase socket with switch , 13A, 3 prong, 2gang (2 modules)
c. 1 phase socket ,Shuko Type, 16A, 1 gang (5 modules)
d. 1 phase industrial Socket , with cover, 16A, 2Pole & Earth (2 modules)
e. 3 phase industrial socket , with cover, 16A ,2Pole with Neutral & Earth (2 modules)
f. 1 phase CEE ,16A, 3 Round Prong (2 modules)
Industrial switches:
a. Toggle switches , 2PST (4 modules)
b. Push Button,1 NO 1NC (2 modules)
c. Cam Switches, ON /OFF (2 modules)
d. Selector switch, (for three phase amperage measurement)(1 module)
e. Selector switch (for three phase voltage measurement) (1 module)
f. Stepping relay for sequencing : 2SPST switches with 4 sequences (1 module)
g. Latching relay:(1modules)
h. 2 relay with Bistable operating contacts, coil,
i. 24 VAC, 3 contacts, 48VAC, 2A
Circuit Breakers:
a. MCB,1 phase, 6A (5 modules)
b. MCB,1 phase, 16A (2 modules)
c. MCB,3 phase, 16A (1 module)
d. ELCB,1 phase (1 module)
e. ELCB,3 phase (1 module)
f. NFB,1 phase (1 module)
Lights and Fixtures:
It includes match lamp holders complete with lamps mounted on to plexiglass panels with 4mm terminals,
a. Incandescent lamp holder with bulb ,E27,220V (4modules)
b. Incandescent lamp holder with bulb ,E14,220V (4modules)
c. Fluorescent lamp holder with starter and ballast,10W (2modules)
d. Fluorescent lamp holder with starter and ballast, 20W (2modules)
e. Mercury lamp holder with lamp (2 modules)
f. Pilot signaling lights, 24VAC, (1modules)
g. Set of three (red, yellow, green)
h. Filament tungsten lamp
i. tungsten filament lamp
j Metal Hallide lamp
k. High pressure sodium lamp
l. Low pressure sodium lamp
Controls and Components:
a. Control transformer, input 220 VAC, output 6/12/24 (2 modules)
b. Control relay : 24 VAC, 2NO 2NC (2 modules)
c. Control relay : 220VAC, (2 modules)
d. Timer : 24hours 2NO 2NC (1 module)
e. Door Bell, 12VAC (1module)
f. Buzzer ,12VAC (1module)
Measuring Instruments:
a. Mains input panel for Single and Three phase (1 module)
b. Set of stackable 4mm connection test leads (set)
c. Test leads stands of stackable cable (One)
d. Ampere meter :0 to 20 Amps (1 module)
e. Voltmeter : 0 to 500VAC (1 module)
f. Ampere meter : 0-5 Amps (1module)
Telephone/Intercom Modules:
a. Door phone signaling board (1 module)
b. Master phone / Intercom (2 rooms + door station + buzzer) (1 module)
c. Sub station phone / Intercom (2 modules)
d. Signaling push button (maid / porter / valet) (1 module)
e. Electric door lock 12V(1 module)
Training Panel Frames:
a. Three Level Mobile Frames with 4 rails (1 module)
b. Height : 1850mm , Width : 1100mm
Additional Items:
1. Additional meters to enhance the measurement capabilities
2. Storage Cabinets are available for safe and secure storage of the Panel Modules.
3. Double Door Storage cabinet with slots to accommodate the panels (Optional)
