Flow Boiling Demonstration Apparatus Model BSG 005
Flow Boiling Demonstration Apparatus Model BSG 005
Sci-tech Flow Boiling Demonstration Apparatus Model BSG 005, the process of evaporation in heated pipes that occurs in water-tube boilers can be demonstrated. The different phases that appear during evaporation in the pipe can be clearly seen. The double-wall glass evaporation pipe allows the evaporation process to be observed closely. Hot water flows through the outer pipe and evaporates the medium in the inner pipe. The non-toxic liquid used starts to evaporate at 40 to 50°C. Low system pressures can be generated with the built-in water jet pump.
| Size: | 60cm x 45cm x 80cm (LxWxH) |
| Weight: | 65 kg |
Item Description
With Sci-tech Flow Boiling Demonstration Apparatus Model BSG 005, the process of evaporation in heated pipes that occurs in water-tube boilers can be demonstrated. The different phases that appear during evaporation in the pipe can be clearly seen. The double-wall glass evaporation pipe allows the evaporation process to be observed closely. Hot water flows through the outer pipe and evaporates the medium in the inner pipe. The non-toxic liquid used starts to evaporate at 40 to 50°C. Low system pressures can be generated with the built-in water jet pump.
The pipe systems are clearly laid out on a metal panel. The hot water circuit consists of an expansion vessel, a circulating pump and heater. An evaporation pipe, vapour collector, water-cooled condenser and return pipe form the evaporation circuit.
Technical Specifications
SYSTEM COMPONENTS
- Cooling water connection,
- Evaporator pipe,
- Shut off valve,
- Water jet vacuum pump,
- Collector with manometer, excess pressure valve and bleeding,
- Condenser,
- Hot water expansion vessel,
- Thermometer for hot water feed,
- Switch for heater and pump,
- Circulating pump,
- Electrical heater with thermostat
EXPERIMENTS
Evaporation Flow:
– Single phase liquid flow
– Bubbly flow
– Slug flow
– Annular flow
– Film boiling
– Drop flow (mist)
– Single phase vapour flow
Effect on the evaporation process:
– flow rate
– temperature
– pressure
OPERATION & MAINTENANCE MANUAL
Self-explanatory operating & maintenance manual will be provided. This will include Theory, operating procedure, standard results, and maintenance procedures.
SERVICE REQUIRED AT SITE
- Electric supply 220 ~ 240V AC, 50 Hz
- Water line
Model Number
BSG 005
See also different:
The Sci-tech 20M Adjustable Bed Flow Channel Unit Model FM 32 10M~20M is suitable for demonstrations and teaching of open channel flows. By closing the top of the channel, the unit can also be used to demonstrate duct flows. The complete unit [...]
Sci-tech Hook’s Coupling Apparatus Model MT 061 is a table model that demonstrates the transmission of angular motion to joint shafts, the related gimbal error and how this error can be rectied using Hooke’s couplings. The model consists of t [...]
Sci-tech Open Channel Sediment Transport Demonstrator Model FM 109 uses sand as an example to demonstrate important phenomena of bed-load transport in the area near the bottom. Open-channel flow without sediment transport is also possible. Dis [...]