Digital Trainer Lab Kits Model ETR 013
Digital Trainer Lab Kits Model ETR 013
Indicators
– 10 TTL/CMOS Logic Level Inputs with Dual Color LED indication for logic low and logic high
– 10 LED for output indication.
Item Description
Clock Generator
– Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1 KHz, 10 KHz, and 100 KHz & 1 MHz.
Pulse Generator
– Logic Pulsar provides single pole double throw bounce less pulses of Low to High and High to Low
transitions.
Logic Probe
– Logic Probe facility provided with LED indicators to indicate Logic High, Low & Tri-state.
Technical Specifications
Bread Board Area
– Two Distribution Strip of 100 tie points each totalling 200 tie points.
– One Terminal Strip of 630 tie points.
Display
– Three digit seven-segment LED display.
Sockets on board
– 14 Pin Socket- 8Nos.
– 16 Pin Socket- 3Nos.
– 20 Pin Socket- 1No.
One IC each of 7400, 7402, 7408, 7432, 7404, 7490,7495, 7486, 7447 & Two Nos. of IC 7476.
Power Supplies
– Fixed DC Power Supply: +5V, ±12V
Interconnections
– All interconnections are made using 2mm banana Patch cords.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– Set of 2mm Patch cords for interconnections.
– User’s Manual with sample experimental programs.
See also different:
Sci-tech Two Pinned Arch Unit Model MT 051 enables to determine experimentally the horizontal component of the abutment thrust of a two hinged arch beam. The beam is supported on ball bearing rollers attached to each end of the beam and the ho [...]
Key Features of TRENDnet 300 Mbps Wireless N Access Point Access Point - 1 x 10/100Mbps Ethernet Port - GREENnet Technology - Access Point or Access Point (AP) Client (Wireless Adapter) Mode - Broadcast Up to 4 SSIDs with Different Wireless En [...]
