Characteristics of Semiconductors Model ETR 026 Series
Home » Products » Characteristics of Semiconductors Model ETR 026 Series
Characteristics of Semiconductors Model ETR 026 Series
Sci-tech Characteristics of Semiconductors Model ETR 026A
Sci-tech Characteristics of Transistors Model ETR 026B
Sci-tech Characteristics of FET, MOSFET, IGBT Model ETR 026C
Sci-tech Characteristics of UJT, PUT, OPTO Model ETR 026D
Sci-tech Characteristics of SCR & TRIAC Model ETR 026E
Sci-tech Characteristics of LDR, Photodiode, Photo-Transistor & Solar Cell Model ETR 026F
Item Description
Sci-tech Characteristics of Semiconductors Model ETR 026A is a versatile trainer introducing the basic semi-conductors: Diodes, LEDs, DIAC etc their characteristics, functional configurations and their basic circuits/experiments. In built power supply enables independent testing. In built power supply enables independent testing.
Sci-tech Characteristics of Transistors Model ETR 026B is a versatile trainer introducing the transistors, their characteristics, functional configurations and their basic circuits/experiments. In built power supply enables independent testing.
Sci-tech Characteristics of FET, MOSFET, IGBT Model ETR 026C is a versatile trainer introducing FET, MOSFET & IGBT, their characteristics, functional configurations and their basic
circuits/experiments. In built power supply enables independent testing.
Sci-tech Characteristics of UJT, PUT, OPTO Model ETR 026D is a versatile trainer introducing UJT, PUT, OPTO, their characteristics, functional configurations and their basic circuits/experiments. In built power supply enables independent testing.
Sci-tech Characteristics of SCR & TRIAC Model ETR 026E is a versatile trainer introducing SCR & TRIAC, their characteristics, functional configurations and their basic circuits/experiments. In built power supply enables independent testing.
Sci-tech Characteristics of LDR, Photodiode, Photo-Transistor & Solar Cell Model ETR 026F is a versatile trainer introducing LDR, Photodiode, Photo-Transistor & Solar Cell, their characteristics, functional configurations and their basic circuits/experiments. In built power supply enables independent testing.
Technical Specifications
Model ETR 026A:
Specifications
– Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K.
– One LED indicator to indicate Power input.
– On-board Semiconductor Devices
– Silicon Diode
– Germanium Diode
– Zener Diode.
– Light Emitting Diode.
– DIAC
– Variable DC power supply : 0 to ± 15 V/150mA
– Variable DC power supply : 0 to ± 30 V/150mA
– All interconnections are made using 2mm banana Patch cords.
– Bare board Tested Glass Epoxy PCB is used.
– Attractive injection molded plastic enclosures.
– Set of 2mm Patch cords for interconnections
Model ETR 026B:
Specifications
– Variable Power Supply of 0 to +15 DC
– Variable Power Supply of 0 to +30 DC
– One LED indicator to indicate Power input.
– On-board Circuits
– Transistor CE Configuration.
– Transistor CC Configuration.
– Transistor CB Configuration.
– All interconnections are made using 2mm banana Patch cords.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy PCB is used.
– Attractive injection molded plastic enclosures.
– Set of 2mm Patch cords for interconnections
MODEL ETR 026C:
Specifications
– Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K.
– One LED indicator to indicate Power input.
– On-board Semiconductor Devices
– MOSFET
– FET/JFET
– IGBT
– Variable DC power supply : 0 to + 15 V/150mA
– Variable DC power supply : 0 to + 30 V/150mA
– All interconnections are made using 2mm banana Patch cords.
– Bare board Tested Glass Epoxy PCB is used.
– Attractive injection molded plastic enclosures.
– Set of 2mm Patch cords for interconnections
MODEL ETR 026D:
Specifications
– Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K.
– One LED indicator to indicate Power input.
– On-board Semiconductor Devices
– OPTO Configuration
– UJT Configuration
– PUT Configuration
– Variable DC power supply: 0 to + 15 V/150mA
– Variable DC power supply: 0 to + 30 V/150mA
– All interconnections are made using 2mm banana Patch cords.
– Attractive injection molded plastic enclosures.
– Bare board Tested Glass Epoxy PCB is used
MODEL ETR 026E:
Specifications
– Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K.
– Load of 1K, 5W resistance
– One LED indicator to indicate Power input.
– On-board Circuits
– SCR Configuration
– TRIAC Configuration
– Variable DC power supply : 0 to + 15 V/150mA
– Variable DC power supply : 0 to + 30 V/150mA
– All interconnections are made using 2mm banana Patch cords.
– Bare board Tested Glass Epoxy PCB is used.
– Set of 2mm Patch cords for interconnections
– Attractive injection molded plastic enclosures.
MODEL ETR 026F:
Specifications
– Resistance Block consisting of One Resistance of 1K and Two Potentiometer of 100K.
– One LED indicator to indicate Power input.
– On-board Circuits
– LDR-Configuration
– Lamp Block
– Solar Cell Configuration
– Photo Transistor/ Photo Diode Configuration
– Fixed DC Power Supply: 0 to +12V
– All interconnections are made using 2mm banana Patch cords.
– Bare board Tested Glass Epoxy PCB is used.
– Attractive injection molded plastic enclosures.
– Set of 2mm Patch cords for interconnections
See also different:
Sci-tech Electrical Wiring & Motor Control Technology Trainer Model ELTR 018 is designed to provide student with full training on Electrical Wiring and motors control circuits, their control circuit technologies. The Trainer is mainly to o [...]